High Resolution Imaging of Latent Fingerprints by Localized Corrosion on Brass Surfaces

Abstract:  The Atomic Force Microscope (AFM) is capable of imaging fingerprint ridges on polished brass substrates at an unprecedented level of detail. While exposure to elevated humidity at ambient or slightly raised temperatures does not change the image appreciably, subsequent brief heating in a flame results in complete loss of the sweat deposit and the appearance of pits and trenches. Localized elemental analysis (using EDAX, coupled with SEM imaging) shows the presence of the constituents of salt in the initial deposits. Together with water and atmospheric oxygen—and with thermal enhancement—these are capable of driving a surface corrosion process. This process is sufficiently localized that it has the potential to generate a durable negative topographical image of the fingerprint. AFM examination of surface regions between ridges revealed small deposits (probably microscopic "spatter" of sweat components or transferred particulates) that may ultimately limit the level of ridge detail analysis.     

Validation of Ultrastructural Analysis of Mitochondrial Deposits in Cardiomyocytes as a Method of Detecting Early Acute Myocardial Infarction in Humans*

Abstract: In the present study, ultrastructural analysis of mitochondrial deposits (black dots within mitochondria) as a method for the detection of early acute myocardial infarction (AMI) was evaluated. In 24 patients with AMI and six controls, analysis was performed in the heart of infarcted patients and noninfarcted controls. In the infarction area in lactate dehydrogenase (LDH)‐diagnosed AMI, the percentage of positive mitochondria was significantly higher compared to corresponding heart tissue in control patients and compared to noninfarcted areas within these patients. Also in patients with a clinically diagnosed AMI but no LDH decoloration, a significant higher percentage of positive mitochondria was found in the left ventricle compared to controls and noninfarcted areas. In patients with AMI, an increase in mitochondria with deposits was found in the infarction area compared to controls and noninfarcted tissue within the same patient, suggesting that electron microscopical changes in mitochondria can be used for the diagnosis of AMI less than 3 h old.     

Dental Cementum in Age Estimation: A Polarized Light and Stereomicroscopic Study

Abstract: Dental hard tissues are good candidates for age estimation as they are less destructive and procedures to determine age can be easily performed. Although cementum annulations and cementum thickness are important parameters in this regard, they are seldom used. This study was undertaken to review the methods, difficulties in execution of techniques, and accuracy of cementum thickness and annulations in estimating the age. Unstained and stained ground sections of tooth were used to measure cemental thickness and count cemental annulations based on which age was estimated and was compared with known age. Although there was positive relation between cemental thickness and annulations with age, only in 1–1.5% of cases, age could be predicted with accuracy.     

Controversial Suicide Case Using a Submachine Gun with a Sound Suppressor—The Need of Team Work of Forensic Chemistry and Firearm Examiners

Evidence materials in a presumed suicide case were studied by a firearm examiner and a forensic chemist. The victim's body with double gunshot wounding in his forehead, a machine gun in the sustained fire mode with a silencer, and four cartridge cases were found. Examinations of the evidence, the case file studies, and experiments dedicated to the case were carried out. Relationships between the placement of cartridge cases and the gun were established using a fast camera. The distributions of gunshot residues on the evidence materials and within the comparative gunshot patterns were studied by means of optical and electron microscopy, X‐ray microanalysis, and infrared spectroscopy. The shooting distance was assessed to be 30 cm or more, whereas the greatest distance that could have been achieved by the victim himself was about 11–13 cm. The obtained results supported the version of homicide rather than suicide.     

Fingermark visualisation on metal surfaces: An initial investigation of the influence of surface condition on process effectiveness

Fingermark recovery from metal surfaces is an area of operational interest, both from the association of metals with weapons used in violent crime and from the increasing incidence in metal theft. This paper reports a feasibility study into the effectiveness of a range of fingermark visualisation processes in developing fingermarks on clean metals (brass, bronze and stainless steel), and on the same metals after prolonged exposure to an outdoor environment. Scanning electron microscopy (SEM) was used to investigate how the surface type and condition could influence the development of fingermarks for each of the processes used. It was found that the behaviour observed varied between each of the processes (cyanoacrylate fuming, Lumicyano?, gun blueing and carbon-based powder suspension). In some cases the chemical composition of the surface affected the development of the mark more than the surface condition, and in other cases the reverse was true. The best performing processes differed according to the surface type and condition, with cyanoacrylate fuming processes working best on brass and bronze, and powder suspensions being better on stainless steel. These preliminary results reinforce the need to take into account both surface type and condition before selection of the most effective fingermark visualisation process and demonstrate the value of techniques such as SEM in developing a fundamental understanding of the interactions between fingermarks and surfaces.     

A New Method for the Removal and Analysis of Small Particles Adhering to Carpet Fiber Surfaces,,

Fibers are a commonly encountered evidence type and fiber comparisons are routinely conducted. When the characteristics of questioned and known fibers correspond, the probative value is limited because the characteristics compared are determined by their manufacture. It would be valuable to test the hypothesis that questioned fibers originated from a specific carpet. One means of testing this is to analyze fine particles on the fibers. A procedure was developed for removing adhering particles from fibers and preparing them for scanning electron microscopy/ energy dispersive X‐ray spectrometry (SEM/EDS) analysis. The efficacy of several fluids (acetone, ethanol, hexanes, aqueous ethanol, aqueous sodium hexametaphosphate) and agitation methods (sonication and vortexing) for removing particles from fibers was evaluated. The most effective method evaluated was sonication in ethanol for 10 min. The recovered particles were filtered onto a polycarbonate filter and analyzed by automated SEM/EDS analysis to generate data on the particle assemblage. This method makes possible future research to test the within‐item and between‐item variability of particle assemblages on fibers.     

Analysis and Discrimination of Single‐Layer White Architectural Paint Samples,

Comparative analyses of 50 single‐layer white architectural paints were conducted to determine the discrimination power using standard techniques and to provide a basis for assessing significance when paints with limited features are not discriminated. Utilizing Fourier transform infrared spectroscopy (FTIR), 68 undifferentiated pairs resulted, yielding a discrimination of 94.45%. Adding stereomicroscopy, scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) and backscatter electron (BSE) imaging, and pyrolysis‐gas chromatography/mass spectrometry (Py‐GC/MS), the overall discrimination was 99.35%. The study included blind verification replicates, which resulted in the only pairs without indications of physical or chemical differences. The remaining groups of undifferentiated samples contained subtle differences by at least one technique, but were considered undifferentiated for the discrimination power evaluations. This study demonstrates a high degree of discrimination of single‐layer white architectural paints using methods of analysis often encountered in forensic science laboratories.     

Identification of Tool Marks of a Sickle on a Telephone Cable

Linkage of a cutting tool (a sickle) with a telephone cable of 100 pairs of copper wires is reported in a case of theft of a telephone cable. Telephone cables contain numerous insulated copper wires of small diameter inside an outer covering and are stolen for the relatively precious copper. The cutting pattern of the cable can only point to the type of the tool but because of the large number of copper wires, it is practically difficult to make a definite linkage with the tool used to cut the cable by comparing the tool marks. The present work reports the successful attempt of the authors in establishing a definite linkage of a stolen telephone cable with a sickle recovered from the suspects. Spot microchemical test was performed for detection of copper on the blade of the sickle, and then tool mark comparison was performed to link the tool marks on the metal strip inside the outer covering of the cable to the blade of the sickle.     

Forensic determination of hair deposition time in crime scenes using electron paramagnetic resonance

Several types of biological samples, including hair strands, are found at crime scenes. Apart from the identification of the value and the contributor of the probative evidence, it is important to prove that the time of shedding of hair belonging to a suspect or victim matches the crime window. To this end, to estimate the ex vivo aging of hair, we evaluated time‐dependent changes in melanin‐derived free radicals in blond, brown, and black hairs by using electron paramagnetic resonance spectroscopy (EPR). Hair strands aged under controlled conditions (humidity 40%, temperature 20–22°C, indirect light, with 12/12 hour of light/darkness cycles) showed a time‐dependent decay of melanin‐derived radicals. The half‐life of eumelanin‐derived radicals in hair under our experimental settings was estimated at 22 ± 2 days whereas that of pheomelanin was about 2 days suggesting better stabilization of unpaired electrons by eumelanin. Taken together, this study provides a reference for future forensic studies on determination of degradation of shed hair in a crime scene by following eumelanin radicals by utilizing the non‐invasive, non‐destructive, and highly specific EPR technique.     

Trajectory Reconstruction Through Analysis of Trace Evidence in Bullet–Intermediate Target Interaction by SEM/EDX

Abstract:  A young male was shot to death by a police officer with a Chinese Type 64 7.62 mm pistol when he was dealing with an aggravated assault arising from a traffic accident. By using scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM/EDX), trace deposits on the discharged bullet and the intermediate target, i.e., a concrete telegraph pole at the scene, were identified to be from each other. The result demonstrated the bullet causing the death ricocheted from the concrete telegraph pole before striking the victim, thus indicating the incident was accidental. The case report illustrates the evidential value of trace materials derived, respectively, from discharged bullets and intermediate targets in bullet–intermediate target interaction for trajectory reconstruction. In addition, it indicates that the SEM/EDX method with its nondestructive nature, compared to other methods, may be more helpful in certain situations in determining the origins of trace evidentially valuable deposits on substrates.