王枣子乙素聚乳酸纳米粒的制备与质量评价

目的 对王枣子乙素聚乳酸纳米粒制备工艺和含量测定方法进行研究,并对其进行质量评价.方法 用自乳化溶剂扩散法制得王枣子乙素聚乳酸纳米粒,并对其粒径、形态、表面电位、包封率等进行研究.结果 所得王枣子乙素聚乳酸纳米粒粒径分布均匀,平均粒径为(120±10.6)nm,Zeta电位为-17.6 mV,平均包封率为(90.38±...     

Alcohol dependence and criminal behavior: preliminary results of an association study of environmental and genetic factors in an italian male population

The aim of this study is to propose an innovative approach evaluating the connection between alcohol use disorders and criminal behavior. The research, structured as a case–control study, was based on the analysis of environmental (social variables) and genetic factors (single nucleotide polymorphisms of glutamic acid decarboxylase) in a population (N = 173) of Italian alcohol‐dependent men. Group 1 (N = 47, convicted subjects) was compared with Group 2 (N = 126, no previous criminal conduct). Grade repetition, work problems, and drug problems were statistically associated with criminal behavior. Having daily family meals together and having children were inversely related to convictions. The genotype distribution of the two groups was similar. The association between environmental factors and antisocial behavior confirms previous findings in the literature. The lack of genetic association does not exclude the role of the gamma‐aminobutyric acid (GABA) system in determining antisocial behavior; further studies with larger samples are needed, together with investigation of other components of the GABA pathway.     

红细胞和血痕酸性磷酸酶(EAP)表型及广东人群EAP基因频率的调查

本文采用薄层聚丙烯酰胺凝胶等电聚焦电泳检测红细胞及血痕酸性磷酸酶表型,并对不同条件下的血痕标本进行检测,发现室温下(15～33℃)保存的110例纱布血痕7周内可全部正确分型,21例磁板血痕9周内均可正确分型;含血量≥5λl 的血痕可被正确检出 EAP 表型;日晒、水洗、发霉等因素可影响血痕 EAP 型的正确检出。同时调查了广东人群的 EAP 表型分布,基因频率为 p~a=0. 2338,p~b=0. 7662,发现 EAP 基因频率分布存在着地区差异。     

氟乙酰胺类杀鼠药检测方法的研究进展

综述了氟乙酸、氟乙酰胺、氟乙酸钠的检测方法,通过比较发现存在多种柱前衍生化途径,其中采用五氟卞基溴(PFBBr)柱前衍生化进行GC/ECD检测的灵敏度最高检测限可达1.0ng/mL,而气相质谱联用仪、液相质谱联用仪通过子母离子对的检测可进一步确定衍生化产物,离子色谱和毛细管电泳检测可减少衍生化步骤直接对样品中的氟乙酸钠进行检测,但响应值不如气相色谱。     

GHB free acid: II. Isolation and spectroscopic characterization for forensic analysis

A reference standard for gamma-hydroxybutyric acid (GHB) free acid is not commercially available, making its analysis in forensic exhibits more difficult. GHB free acid is typically encountered in aqueous solution and in the presence of the lactone, gamma-butyrolactone (GBL), presenting difficulty in Fourier transform infrared (FT-IR) analysis. The strong infrared (IR) absorptivity of the GBL carbonyl band, the shifting of the GBL carbonyl band in aqueous solutions, and the position of the O-H bend for water can mask the main carbonyl band for GHB free acid. Model solutions of beta-hydroxybutyric acid (BHB) and GBL were studied in order to further understand the masking of the GHB free acid carbonyl band in FT-IR analysis. The use of second derivative FT-IR spectroscopy was shown to provide resolution of the free acid carbonyl band, and a presumptive test for GHB free acid was developed and applied. An extension of this work included preparing, for use as a standard reference material, small amounts (< or = 10 mg) of GHB free acid. Preparation was based on the instantaneous reaction of GHB's sodium salt with a stoichiometric amount of hydrochloric acid in aqueous solution, and subsequent isolation of the free acid in neat liquid form. Both FT-IR and proton nuclear magnetic resonance spectra of the neat reference material were obtained and used to verify its identity. The isolation of GHB free acid from actual forensic exhibits is also presented, with identity confirmation using FT-IR.     

毛发中GHB的检测及评价

目的探索毛发中外源性GHB的检测及判断的可行性,为涉GHB的鉴定提供方法和依据。方法建立毛发中GHB的GC/MS分析方法,并通过动物实验,考察毛发中内源性GHB的质量分数范围、外源性GHB在毛发中的时间过程以及给药剂量、毛发颜色与毛发中GHB的质量分数关系。结果豚鼠和中国人黑色毛发中内源性GHB质量分数分别为(3.01±1.41)ng/mg(n=28)和(1.02±0.27)ng/mg(n=20);摄GHB后毛发中GHB质量分数明显增加且与给药剂量呈正相关性;GHB在毛干中呈窄带分布;深色毛发中GHB质量分数高于浅色毛发。结论毛发中GHB的检测适用于GHB滥用和中毒的法医毒物学鉴定;根据毛发中的GHB质量分数和毛发分段分析可判断GHB的来源。     

Evaluation of real-time PCR amplification efficiencies to detect PCR inhibitors

Real-time PCR analysis is a sensitive template DNA quantitation strategy that has recently gained considerable attention in the forensic community. However, the utility of real-time PCR methods extends beyond quantitation and allows for simultaneous evaluation of template DNA extraction quality. This study presents a computational method that allows analysts to identify problematic samples with statistical reliability by comparing the amplification efficiencies of unknown template DNA samples with clean standards. In this study, assays with varying concentrations of tannic acid are used to evaluate and adjust sample-specific amplification efficiency calculation methods in order to optimize their inhibitor detection capabilities. Kinetic outlier detection and prediction boundaries are calculated to identify amplification efficiency outliers. Sample-specific amplification efficiencies calculated over a four-cycle interval starting at the threshold cycle can be used to detect reliably the presence of 0.4 ng of tannic acid in a 25 microL PCR reaction. This approach provides analysts with a precise measure of inhibition severity when template samples are compromised. Early detection of problematic samples allows analysts the opportunity to consider inhibitor mitigation strategies prior to genotype or DNA sequence analysis, thereby facilitating sample processing in high-throughput forensic operations.     

Use of a Spray Device to Locate Touch DNA on Casework Samples

The use of a fluorescent dye to visualize cellular material on surfaces offers a targeted sampling approach for locating touch DNA on casework items. However, the current application of such dye is not feasible for examination of relatively large items. As a result, development of an efficient dye application system is required to translate this approach into practice. Here, the spray pattern (area covered, intensity, and evenness) of 15 different commercial spray devices was examined visually using food coloring. From this, five devices were selected to apply Diamond Nucleic Acid Dye (DD) to three substrates (glass slide, plastic sheet, and brown packing tape) seeded with saliva and touch DNA. The cellular material was visualized using the Dino-lite Microscope and Polilight. The inhibitory effects of DD afforded by each spray device were examined using Identifiler Plus^® DNA profiling kit and a DNA input of 800 pg. The two most promising devices were further tested on a range of mock casework items seeded with touch DNA. The results presented demonstrate the feasibility of a spray system to apply DD to large surfaces and subsequently detect cellular material at both micro and macroscale. Specifically, the data suggest that a pressurized continuous-spray system is favorable and that droplet size influences the intensity of fluorescence and surface coverage. Furthermore, this study indicates that full STR profiles can be obtained following spraying with DD solution, even with excessive application, which is essential for the widespread use of these devices in casework.     

The Analysis of 3D Printer Dust for Forensic Applications,,

3D printers are becoming increasingly efficient and economical, and thus more widespread and easily accessible to consumers and businesses. They have been used to print nefarious objects such as guns and suppressors. Previous research has documented the release of dust particles during the printing process; however, little has been written about the morphology and chemical features that define the dust emitted by these printers. This study was undertaken to recover, analyze, and identify the dust produced during the printing process in the context of forensic trace evidence analysis. Samples were collected from a variety of 3D fused deposition modeler printers, representing both consumer and commercial grade models. This work focused on printers that use thermoplastic filaments composed of acrylonitrile butadiene styrene (ABS) or polylactic acid (PLA), two of the most commonly used filament polymers. Swabs were used to collect dust within the printer chamber and then processed to isolate the dust particles. Particles produced from ABS filaments are most easily recognized via light microscopy through a combination of color, morphology, and fluorescence. The composition of these particles can be confirmed through analysis by either FTIR or Raman microspectroscopy. These methods can also be used to identify ABS fillers and pigments within the printer dust particles. In contrast, dust from PLA printers consistently contained finer, submicron-sized particles that could be observed by field emission scanning electron microscopy. Because the size of the particles precludes their identification using vibrational spectroscopy methods, pyrolysis-GC-MS was used to confirm the presence of PLA.     

Ethylene glycol poisoning

A 40-year-old man was admitted to the emergency department after a suicide attempt. The patient was found at home unconscious, with an open bottle of antifreeze near him. The patient was in a coma on admission, but neurological examination excluded intracranial changes. Results of initial urine and serum toxicological screening tests were negative. Laboratory values indicated metabolic acidosis, leukocytosis, urinalysis revealed hematuria and unrecognized crystals. Osmolality and osmol gap were not determined on patient admission. Treatment with ethanol as an antidote and hemodialysis were started because of metabolic acidosis, anamnestic data and clinical status of the patient, and subsequently led to improvement of his condition. Further toxicological analyses of glycolic and oxalic acids in serum and urine samples were performed by ion-chromatography (IC) method and showed high values in spot urine and serum ultrafiltrate at admission, but during therapy the values progressively decreased. Treatment of poisoned patient for 3 weeks resulted in complete recovery.