Evaluation of the Suchey-Brooks method for aging skeletons in the Balkans

This study has been carried out to examine whether the Suchey-Brooks (S&B) methods could be successfully applied in age assessment of populations from the Balkans. The known-age sample consists of 33 females and 52 males pairs of pubic bones collected from the autopsy cases. Age estimation by S&B method showed an accuracy of 89.74% in males and 72.0% in females. Statistical analysis showed a positive correlation between the actual age of the investigated individuals and age phases obtained by the S&B method, although the mean values of the sixth age category differed significantly compared with the original model. The most reliable indicators in both sexes were the relief of the symphyseal surface, lipping, symphyseal rim, and dorsal margin. The discriminating power of these indicators was the least reliable in distinguishing S&B phases 2 and 3. Based on these results, the appropriate recommendations for aging Serbian populations are made. There was a good agreement between two observers (kappa=0.726).     

Virtual autopsy and forensic identification-practical application: a report of one case

The body of an unidentified elderly woman was found trapped in a floodgate. Prior to autopsy, full-body multislice computed tomography (MSCT) was performed for study of bone lesions and cause of death. Age was estimated by analysis of the sternal end of the fourth rib and of the pubic symphyseal medial articular surfaces. The results were then compared with the autopsy findings. MSCT was superior to autopsy in diagnosis of traumatic bone lesions and also revealed dental anomalies and signs of drowning. Age estimation gave a similar result for both methods. This case report illustrates the potential value of MSCT for medico-legal investigations of death: diagnosis of injuries, possibility of determining the cause of death, and anthropological study in order to estimate age or to visualize features likely to enable identification of a corpse.     

Heat Induced Changes to Dental Resin Composites: A Reference in Forensic Investigations?*

The objective was to investigate color change and surface damage in dental resin composites exposed to high temperatures over different time intervals for comparative purposes. Samples were prepared using two resins - Z100(R) (R1) and Charisma (R2), heated at the following temperatures: 200 degrees C, 400 degrees C, 600 degrees C, 1000 degrees C, for 15, 30 and 45 min (n = 104 for each resin sample). Color (DeltaE) and brightness (DeltaL) changes were analyzed by spectrophotometry using the CIE Lab system and surface changes by Scanning Electron Microscopy (SEM). R1 showed more intense color changes after heat exposure than R2. DeltaL values were found to be the best parameter for evaluation of light and color change. A biphasic pattern after thermal exposure was detected, from dark brown to light white. SEM showed more intense alterations in R2 than in R1. These results indicate that the parameters observed in both resins are useful as a guide in forensic analyses.     

Population substructure can significantly affect reliability of a DNA-led process of identification of mass fatality victims

Aiming to evaluate the effects of population substructure on the reliability of a DNA correspondence in the process of human identification, we used the model of "in silico" constructed populations with and without substructure. Effects of population substructure were evaluated at the level of locus heterozygosity, Hardy-Weinberg equilibrium and mini-haplotype distribution. Inbreeding in a subpopulation of 100 individuals through 10 generations did not significantly alter the level of heterozygosity and Hardy-Weinberg equilibrium. However, analysis of mini-haplotype distribution revealed a significant homogenization in separated subpopulations. Average observed mini-haplotype frequency (f(o)) increased to threefold from expected values (f(e)), and the number of mini-haplotypes with f(o)/f(e) above 10 increased over sixfold, suggesting that the effects of population substructure on calculated likelihood ratios (LR) might be larger than previously estimated. In most criminal cases, this would not represent a problem, whereas for identifications in large-scale mass fatality events, population substructure might considerably increase the risk of false identification.     

Estimation of age-at-death for adult males using the acetabulum, applied to four Western European populations

Methods to estimate adult age from observations of skeletal elements are not very accurate and motivate the development of better methods. In this article, we test recently published method based on the acetabulum and Bayesian inference, developed using Coimbra collection (Portugal). In this study, to evaluate its utility in other populations, this methodology was applied to 394 specimens from four different documented Western European collections. Four strategies of analysis to estimate age were outlined: (a) each series separately; (b) on Lisbon collection, taken as a reference Coimbra collection; (c) on Barcelona collection, taken as a reference both Portuguese collections; and (d) on London collection taken as reference the three Iberian collections combined. Results indicate that estimates are accurate (83-100%). As might be expected, the least accurate estimates were obtained when the most distant collection was used as a reference. Observations of the fused acetabulum can be used to make accurate estimates of age for adults of any age, with less accurate estimates when a more distant reference collection is used.     

High Resolution Imaging of Latent Fingerprints by Localized Corrosion on Brass Surfaces

Abstract:  The Atomic Force Microscope (AFM) is capable of imaging fingerprint ridges on polished brass substrates at an unprecedented level of detail. While exposure to elevated humidity at ambient or slightly raised temperatures does not change the image appreciably, subsequent brief heating in a flame results in complete loss of the sweat deposit and the appearance of pits and trenches. Localized elemental analysis (using EDAX, coupled with SEM imaging) shows the presence of the constituents of salt in the initial deposits. Together with water and atmospheric oxygen—and with thermal enhancement—these are capable of driving a surface corrosion process. This process is sufficiently localized that it has the potential to generate a durable negative topographical image of the fingerprint. AFM examination of surface regions between ridges revealed small deposits (probably microscopic "spatter" of sweat components or transferred particulates) that may ultimately limit the level of ridge detail analysis.     

A Comparison of Cleaning Regimes for the Effective Removal of Fingerprint Deposits from Brass

Abstract:  Effective removal of fingerprint deposits is crucial for experimentation related to the corrosion of metals by fingerprint deposits. Such removal is also necessary prior to deposition of test fingerprints. The effectiveness of four regimes in removing fingerprint deposits from brass is considered. Sustained wiping of the deposit with a tissue at applied pressures of up to c . 1430 Pa or rubbing while the brass was immersed in acetone both failed to remove completely all traces of fingerprint deposits. Heating the brass to 600°C was an effective remover; however, this also oxidized the surface of the metal except where inhibited by fingerprint deposits. The most effective regime, and the only one of the four that removed all traces of deposit without affecting the properties of the metal surface, was immersion in warm soapy water while rubbing with a tissue. We propose this as the preferred method for fingerprint removal.     

A Statistical Validation of the Individuality and Repeatability of Striated Tool Marks: Screwdrivers and Tongue and Groove Pliers*

Abstract: Tool mark identification relies on the premise that microscopic imperfections on a tool’s working surface are sufficiently unique and faithfully transferred to enable a one‐to‐one association between a tool and the tool marks it creates. This paper presents a study undertaken to assess the validity of this premise. As part of this study sets of striated tool marks were created under different conditions and on different media. The topography of these tool marks was acquired and the degree of similarity between them was quantified using well‐defined metrics. An analysis of the resulting matching and nonmatching similarity distributions shows nearly error‐free identification under most conditions. These results provide substantial support for the validity of the premise of tool mark identification. Because the approach taken in this study relies on a quantifiable similarity metric, the results have greater repeatability and objectivity than those obtained using less precise measures of similarity.     

Optical Characterization of Some Modern “Eco‐Friendly” Fibers*

Abstract: Fibers that are termed “eco‐friendly” or “biodegradable” by manufacturers are increasingly being used in textile products such as apparel and carpeting to appeal to the ever more environmentally aware public. As such, these modern fibers are expected to begin showing up more often in forensic casework, and it is important that the forensic examiner recognize them. This study employed polarized light microscopy (PLM) and Fourier transform infrared (FTIR) microspectroscopy to characterize selected fibers of azlon, polylactic acid (PLA), cellulose composites of alginate or chitin, and bamboo (viscose rayon). Fiber cross‐sections, refractive indices, melting points, solubilities, and FTIR measurements were conducted. Results indicate that the azlons and PLA fibers are easily distinguishable from other textile fibers by their optical and chemical properties. The cellulose composites show only small differences in comparison with other cellulose‐based fibers, while bamboo viscose rayon is indistinguishable from normal viscose rayon.     

Pilot Study of Automated Bullet Signature Identification Based on Topography Measurements and Correlations*†

Abstract: A procedure for automated bullet signature identification is described based on topography measurements using confocal microscopy and correlation calculation. Automated search and retrieval systems are widely used for comparison of firearms evidence. In this study, 48 bullets fired from six different barrel manufacturers are classified into different groups based on the width class characteristic for each land engraved area of the bullets. Then the cross‐correlation function is applied both for automatic selection of the effective correlation area, and for the extraction of a 2D bullet profile signature. Based on the cross‐correlation maximum values, a list of top ranking candidates against a ballistics signature database of bullets fired from the same model firearm is developed. The correlation results show a 9.3% higher accuracy rate compared with a currently used commercial system based on optical reflection. This suggests that correlation results can be improved using the sequence of methods described here.