A Comparison of Cleaning Regimes for the Effective Removal of Fingerprint Deposits from Brass

Abstract:  Effective removal of fingerprint deposits is crucial for experimentation related to the corrosion of metals by fingerprint deposits. Such removal is also necessary prior to deposition of test fingerprints. The effectiveness of four regimes in removing fingerprint deposits from brass is considered. Sustained wiping of the deposit with a tissue at applied pressures of up to c . 1430 Pa or rubbing while the brass was immersed in acetone both failed to remove completely all traces of fingerprint deposits. Heating the brass to 600°C was an effective remover; however, this also oxidized the surface of the metal except where inhibited by fingerprint deposits. The most effective regime, and the only one of the four that removed all traces of deposit without affecting the properties of the metal surface, was immersion in warm soapy water while rubbing with a tissue. We propose this as the preferred method for fingerprint removal.     

Analysis of Pigmented Inkjet Printer Inks and Printed Documents by Laser Desorption/Mass Spectrometry*,†

Abstract: Anyone with a computer, scanner, and color printer has the capability for creating documents such as identification cards, passports, and counterfeit currency. Laser desorption mass spectrometry (LDMS) has been demonstrated as a powerful tool for colorant analysis. Inkjet printers are now moving largely toward the use of pigments as colorants; their insolubility makes analysis by simpler methods such as thin‐layer chromatography no longer an option. Recent developments in pigmented inkjet printer inks, such as gloss optimizers that coat pigment particles, may prohibit colorant analysis by LDMS. We demonstrate here that pigments used in inks from two Epson printers can be detected and analyzed by LDMS. Also, LDMS spectra of various colors created using a 4‐cartridge (cyan/magenta/yellow/black, CMYK) inkset are evaluated, to begin to develop an approach for unraveling LDMS data from real samples, to determine the number of inks used by a printer, and the chemical composition of the colorants.     

The Effect of Vertebral Numerical Variation on Anatomical Stature Estimates

Abstract: Most humans possess 24 presacral vertebrae composed of seven cervicals, 12 thoracics, and five lumbars. However, variation from this standard pattern exists. The purpose of this study was to test the effect of congenital vertebral numerical variation on anatomical stature estimates and to recommend appropriate procedures when such variation occurs. Our sample consists of 41 individuals with unusual vertebral count patterns and known cadaveric statures from the Smithsonian’s Terry Collection. Raxter et al. published a revised Fully anatomical technique in 2006 and we used this to estimate living stature. Based on our results, we recommend using the standard anatomical technique to reconstruct stature, regardless of vertebral pattern. However, when an individual possesses six sacral segments together with a normal number of presacral vertebrae, we recommend the addition of a slight correction factor of 1.3 cm or 0.8% of estimated stature.     

A Statistical Validation of the Individuality and Repeatability of Striated Tool Marks: Screwdrivers and Tongue and Groove Pliers*

Abstract: Tool mark identification relies on the premise that microscopic imperfections on a tool’s working surface are sufficiently unique and faithfully transferred to enable a one‐to‐one association between a tool and the tool marks it creates. This paper presents a study undertaken to assess the validity of this premise. As part of this study sets of striated tool marks were created under different conditions and on different media. The topography of these tool marks was acquired and the degree of similarity between them was quantified using well‐defined metrics. An analysis of the resulting matching and nonmatching similarity distributions shows nearly error‐free identification under most conditions. These results provide substantial support for the validity of the premise of tool mark identification. Because the approach taken in this study relies on a quantifiable similarity metric, the results have greater repeatability and objectivity than those obtained using less precise measures of similarity.     

The Differentiation of the Volatile Organic Signatures of Individuals Through SPME-GC/MS of Characteristic Human Scent Compounds

Abstract:  Human scent evidence is utilized as an investigative tool through canine scent discriminations based on the premise that human scent is an individualizing characteristic. This study describes the development of what is effectively a human scent barcode consisting of the relative ratios of an individual's "primary odor" compounds utilized to determine a reproducible and individualizing profile which can be stored in a searchable database for a proof of concept of human scent as a biometric measure. Triplicate hand odor samples were evaluated from 10 subjects utilizing solid phase micro-extraction gas chromatography/mass spectrometry (SPME-GC/MS) and compared via Spearman Rank Correlations. Narrowing the compounds considered for each subject to only those common in all three samples, or a subject's "primary odor constituents," produced a greater degree of both individualization and discrimination; at both correlation thresholds of 0.9 and 0.8, the individuals were correctly discriminated and identified in 99.54% of the cases.     

An Unusual Zip Gun Suicide—Medicolegal and Ballistic Examination

Abstract:  Home-made guns are imitations of typical firearms and usually have handgun characteristics. This article presents an unusual case of a suicide carried out by means of a fatal gunshot wound to the head using a home-made zip gun. A 49-year-old male, with a history of paranoid psychosis was found dead in the dwelling place of a family house. The investigation at the crime scene did not lead to suspicion of a gunshot wound because of the unusual nature of the firearm used. A medical examiner diagnosed an opened head injury as the primary cause of the victim's death. The autopsy findings provided immediate grounds for further inspection of the crime scene. Subsequently, a simple zip gun, which had been overlooked during the scene investigation, was discovered. An undeformed projectile recovered from the victim's head was consistent with the use of the home-made firearm. Following the completion of the investigations and autopsy, the death was classified as a suicide.     

1,2,4‐Triazine‐Based Chromogenic Reagents for the Detection of Microtraces of Various Metals Left on Human Skin*

Abstract: This article extends the application of 1,2,4‐triazine‐based chromogenic reagents to the detection of nonferrous metal traces left on contact with canvas and human skin. The possibility of detection of iron traces resulting from contact with objects made of stainless steel was investigated as well. Additionally, the ability of triazines to form chromatic complexes with Zn²⁺, Ni²⁺, Co²⁺, Cu²⁺, Cr³⁺, and Al³⁺ ions was studied spectrophotometrically. Molar absorption coefficients, ranging from 8.8 to 29.9 × 10³/M/cm, provide high sensitivity of 1,2,4‐triazines toward nonferrous ions, thus, enabling the detection at concentrations as low as a few μM. The method was sensitive enough to detect traces resulting from a 1‐min contact with a stainless steel made object, which is commonly considered as a corrosion‐resistant material. The amounts of metal ions transferred to the skin after a 2‐min contact with objects made of brass, zinc, and copper were sufficient to develop chromatic imprints.     

Nonchemical Suffocation Deaths in Forensic Setting: A 6‐Year Retrospective Study of Environmental Suffocation,Smothering, Choking,and Traumatic/Positional Asphyxia*

Abstract: There are still several areas of forensic pathology mainly based on tradition, with textbooks explaining and describing common knowledge that is not supported by modern research data. This study is intended to contribute to evidence‐based data on nonchemical suffocation deaths in the forensic population aged more than 1 year. From 2000 to 2005, all autopsy cases were reviewed: age, gender, type of suffocation, and manner of death were compiled for all victims (96 cases). In general, the results from this study are concordant with the textbook literature, therefore supporting common knowledge related to manner of death in nonchemical suffocation. However, discrepancies have been underscored in smothering: smothering, contrary to the general belief, is probably not mostly homicidal, and accidental smothering is probably not that unusual. Furthermore, new data without actual literature correlates were obtained in the conducting of this study and are presented here.     

Machinery‐Related Deaths: Relevance of Workplace Investigation and Antemortem Radiological Data in Reconstructing the Fatality

Abstract: Machinery‐related fatalities are one of the leading causes of traumatic occupational deaths. In our report, we present the case of a 40‐year‐old male who suffered a severe head trauma while working in a cut‐foam industry and died despite an early craniectomy. The radiological reconstruction of the skull based on preoperative computed tomography scans disclosed a large depressed conical fracture of the left parietal bone. The 3D‐reconstruction of the work area, combined with a fit‐matching analysis between the machinery and the depressed skull fracture allowed us to conclude that the head was crushed between the sliding bar of the cutting device and the metallic protuberance on the opposite side. The case underlines the importance of a detailed workplace investigation and of a thorough evaluation of all circumstantial, clinical, radiological, and autopsy data in the reconstruction of machinery‐related fatalities to identify any possible legal responsibilities of the worker and/or the employer.