Pyrotechnic reaction residue particle analysis

Pyrotechnic reaction residue particle (PRRP) production, sampling and analysis are all very similar to that for primer gunshot residue. In both cases, the preferred method of analysis uses scanning electron microscopy to locate suspect particles and then uses energy dispersive x-ray spectroscopy to characterize the particle's constituent chemical elements. There are relatively few times when standard micro-analytical chemistry performed on pyrotechnic residues may not provide sufficient information for forensic investigators. However, on those occasions, PRRP analysis provides a greatly improved ability to discriminate between materials of pyrotechnic origin and other unrelated substances also present. The greater specificity of PRRP analysis is the result of its analyzing a large number of individual micron-sized particles, rather than producing only a single integrated result such as produced using standard micro-analytical chemistry. For example, PRRP analyses are used to demonstrate its ability to successfully (1) discriminate between pyrotechnic residues and unrelated background contamination, (2) identify that two different pyrotechnic compositions had previously been exploded within the same device, and (3) establish the chronology of an incident involving two separate and closely occurring explosions.     

Infrared spectra of U.S. automobile original finishes. VII. Extended range FT-IR and XRF analyses of inorganic pigments in situ--nickel titanate and chrome titanate

The identification, analysis, and occurrence in U.S. automobile original finishes (1974-1989) of Nickel Titanate (yellow) and Chrome Titanate (yellow-orange) are described in this report. The titanate pigments are based on the rutile (titanium dioxide) structure and there are only minor differences between the infrared absorptions of rutile and the titanates. Titanate pigment absorptions in paint spectra can thus be easily mistaken for those of rutile. Each of the titanates, however, contains two elements in addition to titanium that can serve to distinguish them using elemental analyses. Fourier transform infrared (4000-220 cm(-1)) and X-ray fluorescence instruments were used in combination for the in situ analysis of the titanates. In addition to titanium, nickel, and antimony, the three main detectable elements comprising Nickel Titanate, all of the commercial products of this pigment that were examined also contained impurities of zirconium, niobium, and usually lead. These elements were also detected in most of the monocoats in which Nickel Titanate was identified, as well as in the Chrome Titanate pigments, and the zirconium to niobium ratio was found to exhibit a wide variation. Nickel Titanate is a relatively common pigment that was identified in nearly three dozen U.S. automobile yellow nonmetallic monocoats (1974-1989), while Chrome Titanate appears to have been used in only a few yellow and orange nonmetallic monocoats. The use of the titanate pigments likely increased after this time period as they were replacements for lead chromate pigments (last used in a U.S. automobile original finish in the early 1990s), and are more amenable for use in basecoat/clearcoat finishes than in monocoats. Minor distortions of the infrared absorptions of rutile, anatase, and the titanates obtained using accessories with diamond windows were noted, and their origins are discussed.     

对改善改造环境和营造改造氛围的再思考

改善改造环境、营造改造氛围的真正内涵:监狱应当以人为本,在法律和监狱制度框架内,探索和实践一切有益于罪犯改造的方法和手段,促进改造质量的进一步提高。当前,迫切需要做好监狱警察职位分类、充分利用男监中的女警资源,确立罪犯的改造主体地位,切实保障罪犯人权。     

论远红外线在汽车节油降低空气污染方面的原理及实践

波长 3～ 2 0 μm的远红外线光子可以激发汽车燃油中碳氢分子的键能 ,以提高其热燃效率 ,故能增加发动机输出功率 ,并有节油与降低废气排放的功效     

A Study of the Presence of Gunshot Residue in Pittsburgh Police Stations using SEM/EDS and LC‐MS/MS

Due to possible secondary transfer of gunshot residue (GSR) onto a suspect in police custody prior to sampling, a baseline must be created for the amount of GSR present. With an increase of “lead free” ammunition, testing for both gunpowder and primer GSR is relevant. Seventy samples were collected using carbon‐coated adhesive stubs from four Pittsburgh Police Stations and vehicles to investigate these locations as sources of secondary GSR contamination. These seventy samples were analyzed for primer GSR using scanning electron microscopy‐energy‐dispersive X‐ray spectrometry. One primer GSR particle was detected; no sample was classified as positive for primer GSR. These same samples were then analyzed for gunpowder GSR using liquid chromatography coupled to tandem mass spectrometry to test for akardite II, ethylcentralite, diphenylamine, N‐nitrosodiphenylamine, 2‐nitrodiphenylamine, and 4‐nitrodiphenylamine. Ethylcentralite was quantifiable in two test samples. These results suggest there is a negligible potential for secondary transfer of primer and gunpowder GSR.     

Rapid detection of synthetic cannabinoid receptor agonists impregnated into paper by attenuated total reflectance Fourier transform infrared spectroscopy

The last few years have witnessed the change in the modalities of smuggling of synthetic cannabinoid receptor agonists (SCRAs) by impregnating them in mail envelopes and fast parcels. Considering the aforementioned scenario, it is important to develop a portable technique to identifying SCRAs through packages. The purpose of this research was to detect SCRAs impregnated into substrates of paper using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy. Three SCRAs that included 5F-PB-22, AB-FUBINACA and AKB-48 were purchased from Sigma Aldrich. The three SCRAs and four cutting agents were impregnated into paper of variable thickness at four concentrations (10, 15, 20, and 25 mg/mL). Spectra were collected over the wavenumber range of 650–4000 cm⁻¹ using ATR-FTIR spectroscopy and were exported to Matlab 2020b where data analysis was applied. The FTIR spectral data was able to show the three SCRAs could be detected on paper using ATR-FTIR spectroscopy and quantitatively modeled using the partial least squares regression algorithm. Principal component analysis showed separate clustering for the compounds that crystallized (5F-PB-22, AB-FUBINACA and caffeine) onto the papers surface from those impregnated into the bulk of the paper (AKB-48 and procaine) with the latter situated near blank papers in score plots. In summary, ATR-FTIR spectroscopy has proven to be a successful non-destructive technique in detecting and quantifying a selection of SCRAs impregnated into paper.     

Ultraviolet illumination as an adjunctive aid in dental inspection

Tooth-colored resin fillings have become increasingly popular as restorative materials. Their presence in the dentition presents a challenge to the clinician and the forensic odontologist, as detection of the fillings can be difficult both visually and radiographically. As they necessarily form part of the unique dentition of an individual, recognition of the resins is important for forensic identification. Alternative light sources have been used with success in various fields of forensic science. In recent years small LED flashlights emitting at specific wavelengths in the ultraviolet light (UV) range have been developed. Their low cost, small size, and ready availability makes their use practical in both forensic dental inspection and clinical settings. UV inspection is of interest because enamel, dentin and dental materials all have differing fluorescent properties when illuminated by UV light. It was one goal of this research to quantitatively assess the fluorescence properties of modern restorative resins in order to predict their behavior during inspection using UV illumination. The second goal was to demonstrate practical use of UV in dental inspection with examples of how different materials fluoresce. Quantitative measurements were obtained for optical emission wavelength and intensity for 15 modern resins using a spectrophotometer. Results indicated that resin brands fluoresce at different wavelengths and with varying intensities. Practical use and comparison of the flashlights revealed that the most useful excitation wavelengths for resin detection were in the UVA range (365 and 380 nm). Porcelain restorations and composite resin fillings exhibited different responses to these two wavelengths and thus use of both is recommended for forensic dental inspection.     

An examination of the sequence of intersecting lines using attenuated total reflectance-Fourier transform infrared spectral imaging

In this study, the potential of attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectral imaging as a technique to determine the sequence of line crossings was examined. The technique was successful in determining the sequence of heterogeneous line intersections produced using ballpoint pens and laser printers. By imaging at characteristic frequencies, it was possible to form spectral images showing the spatial distribution of the materials. By examining the spectral images from the inks, it was possible to determine whether the ink was above or below the toner. In blind testing, ATR-FTIR spectral imaging results were directly compared to those obtained by eight experienced forensic document examiners using methods regularly employed in casework. ATR-FTIR spectral imaging was shown to achieve a 100% success rate in the blind tests, whereas some incorrect sequence determinations were made by the forensic document examiners when using traditional techniques. The technique was unable to image ink-jet printing, gel pens, roller ball pens, and felt-tip pens, and was also unable to determine the sequence of intersecting ballpoint pen lines.     

Automated SEM/EDS Analysis of Airbag Residue.* I: Particle Identification

Abstract: Deployed airbags can be a valuable source of probative forensic materials. During an accident, trace evidence can be deposited on the airbag cover and in addition, the residue produced by the gas generation system is released into the passenger compartment of the vehicle as the airbag deflates. This residue can be used to associate a suspect with the vehicle at the time of the accident. This study identifies particles containing zirconium, strontium, and/or copper–cobalt along with other elements from the gas generation systems and aluminum silicon microfibers from airbag filters as the probative material which may be produced and deposited on a suspect’s hands and/or clothing. Scanning electron microscopy can be used to identify this metallic residue. Modification of the search criterion used for gunshot residue analysis allows for automated analysis of the samples. Proper collection of the airbag standard is essential to identify which materials were produced. Prompt collection of suspect samples allows the analysts the ability to make the proper identifications and associations. This analytical technique can be a probative tool in criminal investigations.     

A Novel Approach to the Examination of Soil Evidence: Mineral Identification Using Infrared Microprobe Analysis*

Abstract: Identification of minerals using the infrared microprobe with a diamond internal reflection objective is a rapid and reliable method for forensic soil examinations. Ninety‐six mineral varieties were analyzed, and 77 were differentiated by their attenuated total reflection (ATR) spectra. Mineral grains may be mounted in oil for conventional polarized light microscope characterization and their ATR spectrum obtained with little or no interference by the liquid. This infrared microprobe method can be used to identify silicates, phosphates, nitrates, carbonates, and other covalent minerals; however, ionic minerals, metal oxide and sulfide minerals, and minerals with refractive indexes greater than diamond do not produce identifiable spectra, but the lack of a spectrum or one with high absorbance values does provide useful information. This research demonstrates the overall utility that infrared microprobe analysis brings mineral identification in soil evidence.