Forensic Investigation of Formaldehyde in Illicit Products for Hair Treatment by DAD‐HPLC: A Case Study

The illegal use of formalin (commercial formaldehyde) in cosmetic products harms the health of individuals exposed to this substance. Over the last years, the commercial availability of these products, especially those containing irregular dosage of formaldehyde, has increased in Brazil. This work analyzes some products for hair treatment available in the Brazilian market and verifies their safety. The adopted analytical methodology involved sample derivatization with 2,4‐dinitrophenylhydrazine, followed by high‐performance liquid chromatography with ultraviolet detection (UV–VIS) at λ = 365 nm. The limit of quantification is 2.5 × 10^?3% w/w, and the recovery tests were around 93%. Some of the samples contained high and illegal formaldehyde levels ranging from 9% to 19% (w/w) and others presented suitable concentrations of the analyte. On the basis of the results, this work discusses the efficiency and practicality of this analytical method for forensic purposes.     

Classification of Opium by UPLC‐Q‐TOF Analysis of Principal and Minor Alkaloids

Opium is the raw material for the production of heroin, and the characterization of opium seizures through laboratory analysis is a valuable tool for law enforcement agencies to trace clandestine opium production and trafficking. In this work, a method for opium profiling based on the relative content of five principal and 14 minor opium alkaloids was developed and validated. UPLC‐Q‐TOF was adopted in alkaloid analysis for its high selectivity and sensitivity, which facilitated the sample preparation and testing. The authentic sample set consisted of 100 “Myanmar” and 45 “Afghanistan” opium seizures; based on the data set of the 19 alkaloid variables in them, a partial least squares discriminant analysis classification model was successfully achieved. Minor alkaloids were found to be vitally important for opium profiling, although combined use of both principal and minor alkaloids resulted in the best geographical classification result. The developed method realized a simple and accurate way to differentiate opium from Myanmar and Afghanistan, which may find wide application in forensic laboratories.     

Nail analysis for the assessment of caffeine abuse in Northwest China: A population-based study

Caffeine is the most widely consumed psychoactive agent worldwide and has the potential for abuse, but studies monitoring caffeine abuse in China are scarce. This study aims to estimate the prevalence of caffeine abuse in northwest China and investigate the correlation between caffeine and other drugs in hair and nails using an ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). Fingernail clippings were collected from 376 participants in northwest China to detect caffeine and 13 other illicit psychoactive drugs and their metabolites. Paired hair and nail samples were collected from 39 participants to investigate the correlation between caffeine and other drugs in hair and nails. The samples were decontaminated, pulverized, and extracted by a high-throughput nail sample preparation method and analyzed by UPLC-MS/MS. The results showed a risk of caffeine abuse in northwest China, with concentrations ranging from 0.43 to 10.6 ng/mg for healthy volunteers, 0.49–246 ng/mg for caffeine abusers, and 0.25–363 ng/mg for drug addicts in community rehabilitation centers. Caffeine was detected together with other illicit psychoactive drugs and their metabolites. Furthermore, positive detection correlations were found between hair and nail samples. This study provides a current perspective on caffeine abuse in northwest China and demonstrates the practical use of UPLC-MS/MS for the simultaneous detection of caffeine and 13 illicit psychoactive drugs and their metabolites in hair and nails. The results highlight the potential of nails as a supplementary matrix when hair samples are unavailable and emphasize the need for handling caffeine carefully given its potential for abuse.     

Sampling and recovery of ignitable liquid residues (ILRs) from fire debris using capillary microextraction of volatiles (CMV) for on-site analysis

A new, fast, and ultra-sensitive headspace sampling method using the Capillary Microextraction of Volatiles (CMV) device is demonstrated for the analysis of ignitable liquid residues (ILRs) in fire debris. This headspace sampling method involves the use of a heated can (60°C) to aid in the recovery of volatile organic compounds (VOCs) from medium and heavy petroleum distillates. Our group has previously reported the utility of CMV to extract gasoline at ambient temperature in less than 5 min in the field. This work evaluates the recovery and analysis of low mass loadings (tens of ng) of VOCs from charcoal lighter fluid, kerosene, and diesel fuel. Nonane, decane, undecane, tridecane, tetradecane, and pentadecane were selected for evaluation of recovery to represent these ILR classes. The face-down heated can headspace sampling technique was compared to the previously reported, non-heated, paper cup headspace sampling technique. Mass recovery improvements of 50%–200% for five of the six target compounds in diesel fuel were achieved compared to the non-heated sampling method. The average relative standard deviation (reported as % RSD) between the replicate trials decreased from an average of 28% to 6% when using the heated can method. Ignitable liquids were spiked onto burned debris in a live burn exercise and sampled using the heated can and paper cup headspace sampling techniques. The heated sampling technique reported here, for the first time, demonstrates an effective extraction method that when coupled to a portable GC–MS instrument allows for a sampling and analysis protocol in the field in less than 30 min.     

Effect of Substrate Interferences from High‐Density Polyethylene on Association of Simulated Ignitable Liquid Residues with the Corresponding Liquid

The effect of substrate interferences from high‐density polyethylene (HDPE) on the ability to associate an ignitable liquid residue with the corresponding liquid standard, using statistical procedures, is demonstrated. Gasoline, kerosene, and lighter fluid, at three different evaporation levels, were spiked onto HDPE and subsequently burned to generate simulated ignitable liquid residues (ILRs). Samples were extracted using a passive headspace procedure and analyzed by gas chromatography–mass spectrometry. The total ion chromatograms were subjected to data pretreatment procedures prior to principal components analysis and Pearson product moment correlation. Using the combination of these statistical procedures, simulated ILRs were successfully associated with the corresponding liquid type, despite the presence of compounds inherent to the HDPE substrate, as well as those resulting from pyrolysis of the substrate.     

A Comparison of Solvent Extract Cleanup Procedures in the Analysis of Organic Explosives

The use of an organic solvent to extract explosive residues from hand swabs and postblast debris inevitably leads to the coextraction of unwanted materials, usually in far greater quantities than any explosive residue. In this study, the extraction efficiency of a number of solvent cleanup procedures including solid‐phase extraction (SPE), adsorbent resins such as Chromosorb‐104, and traditional materials such as silica and Florisil was calculated using a quantitative liquid chromatography–ultraviolet (LC‐UV) detection procedure. The Oasis^® HLB cartridge outperformed other cleanup procedures, with analyte recoveries approaching 95%, while the Amberlite XAD‐7 procedure returned the lowest overall recoveries. The matrix rejection ability of each method was then determined using a simulated highly contaminated matrix, with the adsorbent resins showing a higher degree of matrix rejection, which is seen as a reduction in background noise in the UV chromatogram using 210 nm detection.     

A Comparison of Common Swabbing Materials for the Recovery of Organic and Inorganic Explosive Residues

The efficiency of solvent based extraction methods used to remove explosive residues from four different swab types was investigated. Known amounts of organic and inorganic residues were spiked onto a swab surface with acetonitrile or ethanol:water combined with ultrasonication or physical manipulation used to extract the residues from each swab. The efficiency of each procedure was then calculated using liquid chromatography‐ultraviolet detection for organic residues and ion chromatography for inorganic residues. Results indicated that acetonitrile combined with physical agitation proved to be the most efficient method; returning analyte recoveries c. 95% for both alcohol based swabs and cotton balls. Inorganic residues were efficiently extracted using ethanol:water, while the use of acetonitrile followed by water significantly reduced the recovery of inorganic residues. Swab storage conditions were then investigated with results indicating decreased storage temperatures are required to retain the more volatile explosives.     

Pyrolysis Products of Linear Alkylbenzenes— Implications in Fire Debris Analysis*

Abstract: In this case report, potential interferences from an improvised fire‐extinguishing agent, a dishwashing liquid, containing linear alkylbenzene sulfonates (LAS), was studied. The presence of linear alkylbenzenes (LABs) in the fire debris sample was identified from the summed ion profile (SIP) analysis. It was found that the LAS from dishwashing liquids produce LABs by thermal degradation. Direct pyrolysis of a LAS‐containing dishwashing liquid at 300°C yielded a distribution of LABs in the SIP. LABs began to break down at pyrolysis temperatures between 450 and 500°C and completely break down by 800°C. Observed pyrolysis breakdown products of LABs included toluene, ethylbenzene, meta‐, para‐, and ortho‐xylenes, propylbenzene, indane, naphthalene, and 1‐ and 2‐methylnaphthalenes. These data suggested the presence of LABs in fire debris evidence might complicate subsequent analysis because their breakdown products contained some of the target compounds common to ignitable liquid identification. Therefore, a positive determination of the presence of foreign ignitable liquids should be carefully evaluated when there is a presence of LABs in the SIP.     

Profile of Hospital Admissions due to Self‐Inflicted Harm in Los Angeles County from 2001 to 2010

We aimed to describe the demographic profile of self‐inflicted harm (SIH) in Los Angeles County between 2001 and 2010 and to investigate trends over this 10‐year period. We used the California Hospital Discharge Data to investigate all cases of hospital admission due to SIH, including suicide attempts and if they had a concurrent psychiatric diagnosis based on ICD‐9 codes. African‐Americans (AA) had the highest 10‐year SIH admission rates. SIH admission rates remained steady throughout the 10‐year study period. Median age of SIH was significantly lower in Latinos. Episodic mood disorders were the most common psychiatric comorbidity. The use of solid/liquid poisoning was the most common SIH method among all racial/ethnic groups. We found major disparities in SIH admissions across racial/ethnic subgroups. The importance of programs to identify, prevent, and treat SIH in these groups is discussed.     

Recovery and detection of urea nitrate in traces

Urea nitrate (uronium nitrate, UN) is a powerful improvised explosive, frequently used by terrorists in the Israeli arena. It was also used in the first World Trade Center bombing in New York in February 1993. It is difficult to identify UN in postexplosion debris, because in the presence of water it readily decomposes to its original components, urea and nitric acid. A method for the recovery and detection of urea nitrate in traces is described. The residues are extracted with hot acetone, and the extract chromatographed on chromosorb G-HP. The eluent is analyzed by liquid chromatography mass spectrometry using atmospheric pressure chemical ionization (APCI). By applying this technique, we were able to identify urea nitrate in actual exhibits. It was found that UN can be also formed during the analytical procedure, by certain combinations of urea, nitrate ions, and a source of protons and, hence, the presence of the characteristic adduct ion does not necessarily indicate an "authentic" urea nitrate. Several solutions are suggested to overcome this ambiguity.