The Use of Laser Microdissection in Forensic Sexual Assault Casework: Pros and Cons Compared to Standard Methods

Sexual assault samples are among the most frequently analyzed in a forensic laboratory. These account for almost half of all samples processed routinely, and a large portion of these cases remain unsolved. These samples often pose problems to traditional analytic methods of identification because they consist most frequently of cell mixtures from at least two contributors: the victim (usually female) and the perpetrator (usually male). In this study, we propose the use of current preliminary testing for sperm detection in order to determine the chances of success when faced with samples which can be good candidates to undergo analysis with the laser microdissection technology. Also, we used laser microdissection technology to capture fluorescently stained cells of interest differentiated by gender. Collected materials were then used for DNA genotyping with commercially available amplification kits such as Minifiler, Identifiler Plus, NGM, and Y‐Filer. Both the methodology and the quality of the results were evaluated to assess the pros and cons of laser microdissection compared with standard methods. Overall, the combination of fluorescent staining combined with the Minifiler amplification kit provided the best results for autosomal markers, whereas the Y‐Filer kit returned the expected results regardless of the used method.     

In Situ Identification of Semen Stains on Common Substrates via Raman Spectroscopy,,

The spectroscopic identification of body fluids in situ is a major objective in forensic science. This approach offers the confirmatory, nondestructive, rapid, and on‐scene identification of various body fluids. Although Raman spectroscopy has shown tremendous promise toward this goal in prior proof‐of‐concept experiments, a significant challenge which still remains is substrate interference. Here, an approach for detecting semen stains in situ on various substrates using Raman spectroscopy is explored. Simulated semen evidence was prepared on skin, glass, and various fabrics. Raman data were accumulated from stains without any pretreatment using a common confocal mapping spectrometer using 785 nm laser excitation. The results demonstrate that the spectroscopic interferences encountered by substrates can be reduced and eliminated using a combination of existing subtraction techniques and chemometric models. Heterogeneous substrates proved most challenging, however, automatic subtraction treatment, and location of fluid hotspots was able to elucidate a clear spectroscopic signature of semen in every instance.     

胚兔牙囊发育生物行为的组织形态学观察

研究胚兔的牙囊发育生物行为与人的牙囊发育是否相似 ,为人口腔疾病的研究提供模拟实验动物模型 ,采用光镜、电镜及激光扫描共聚焦显微镜对 4 3只胚兔的牙囊发育过程进行形态学观察。结果显示 ,牙囊来源于外胚间质 ,通过胚胎诱导形成牙支持组织 ,分化产生成牙骨质细胞、成骨细胞、成纤维细胞 ,形成牙骨质、固有牙槽骨、牙周韧带及其基质 ,对牙齿发育阶段具有保护和稳定作用 ,调控未来形成的牙周结构 ,在早期发育阶段首先出现 ,与人牙囊发育基本相似 ;最终牙囊在牙冠的顶部形成索引带 ,诱导继承牙萌出 ,在牙冠的根部形成牙支持组织 ,一部分牙囊细胞有程序性细胞死亡 ,以维持牙囊发育期内环境的生理平衡     

Incestuous paternity detected by STR-typing of chorionic villi isolated from archival formalin-fixed paraffin-embedded abortion material using laser microdissection

Microscopic examination of a blood clot expelled by a physically and mentally disabled woman taken to the emergency room because of genital bleeding revealed the presence of chorionic villi encircled by decidua, hemorrhage, and necrosis. In order to identify the father of the product of conception, sections of formalin-fixed, paraffin-embedded abortion material were subjected to laser microdissection: DNA extraction from chorionic villi selectively isolated from the surrounding tissues allowed successful STR-typing of fetal cells, which was otherwise prevented by excess maternal DNA. The large number of homozygous genotypes in the fetal profile suggested incestuous paternity. Analysis of reference DNA samples from male relatives excluded the woman's father, paternal grandfather, and maternal grandfather, whereas the obligate paternal alleles of the fetus were constantly present in the genotypes of the woman's brother, clearly demonstrating brother-sister incest (probability of paternity > 99.99999%).     

Discrimination of transparent polyethylene films based on identification of inorganic antiblocking agents

Several nondestructive and semidestructive analyses were used to discriminate colorless transparent polyethylene bags. Transparent plastic bags made from low-density and linear low-density polyethylene usually contain antiblocking agents to prevent sticking of the film, which makes it difficult to open the mouths of plastic bags. Inorganic antiblocking agents are uniformly dispersed in polyethylene films, so they are easily observed using optical microscopy. The particle size distributions of the antiblocking agents were compared by statistical tests. Particle composition was examined by elemental analysis using energy-dispersive X-ray spectrometry with a scanning electron microscope and by molecular vibration analysis using a sensitive microscopic Raman spectrometer. The compositions could be determined nondestructively on the basis of the results. These data reinforce the morphological discrimination. Morphological discrimination of the dispersed antiblocking agent powders, statistical comparison of particle size distributions, and compositional analysis of the antiblocking agents strengthen the ability to discriminate polyethylene films.     

Detection of Denatonium Benzoate (Bitrex) Remnants in Noncommercial Alcoholic Beverages by Raman Spectroscopy

Illegal alcoholic beverages are often introduced into market using cheap technical alcohol, which is contaminated by denatonium benzoate (Bitrex) of very small concentration. Bitrex is the most bitter chemical compound and has to be removed before alcohol consumption. The home‐made methods utilize sodium hypochlorite to disintegrate particles of denatonium benzoate in alcohol and to remove bitter taste before trading. In this experimental studies, we propose a novel method that detects in a fast way the remnants of denatonium benzoate in dubious alcohol samples by Raman spectroscopy. This method applies a portable Raman spectrometer of excitation wavelength 785 nm and utilizes the effect of surface‐enhanced Raman spectroscopy (SERS) to recognize the suspected alcoholic beverages. High effectiveness (over 98%) of YES/NO classification of the investigated samples was observed when the nonlinear algorithm support vector machine (SVM) was exploited at carefully adjusted detection parameters. The method can identify illicit alcohol within minutes.     

Infrared Spectra of U.S. Automobile Original Finishes (Post – 1989). VIII: In Situ Identification of Bismuth Vanadate Using Extended Range FT‐IR Spectroscopy,Raman Spectroscopy,and X‐Ray Fluorescence Spectrometry

Chrome Yellow (PbCrO₄·xPbSO₄) was a common pigment in U.S. automobile OEM finishes for more than three decades, but in the early 1990s its use was discontinued. One of its main replacements was Bismuth Vanadate (BiVO₄·nBi₂MoO₆, n = 0–2), which was commercially introduced in 1985, as this inorganic pigment also produces a very bright hue and has excellent outdoor durability. This paper describes the in situ identification of Bismuth Vanadate in automotive finishes using FT‐IR and dispersive Raman spectroscopy and XRF spectrometry. Some differentiation of commercial formulations of this pigment is possible based on far‐infrared absorptions, Raman data, and elemental analysis. The spectral differences arise from the presence or absence of molybdenum, the use of two crystal polymorphs of BiVO₄, and differences in pigment stabilizers. Bismuth Vanadate is usually not used alone, and it is typically found with Isoindoline Yellow, hydrous ferric oxide, rutile, Isoindolinone Yellow 3R, or various combinations of these.     

Use of laser-scanning confocal microscopy in the detection of diagenesis in bone

This research demonstrates the value of laser scanning confocal microscopy (LSCM) as a research tool in osteological studies, and diagenetic studies in particular. LSCM combines properties of light and scanning electron microscopy using laser light to excite fluorophores throughout the z-axis, developing a 3-D image. Using differential staining and selecting for specific wavelengths of light, one can image targeted materials. This research is divided into two parts: visualizing bone structures such as proteins and their decompositional products and visualizing diagenesis. Part one of this study utilized pig bones as a means of testing the overall ability of LSCM to fluoresce bone. Twenty-three samples were imaged, including 13 samples from a decompositional study conducted 5 years previous, and 10 “fresh” samples collected from a commercial butcher. This part of the study determined that protein and organic components of the bone could be fluoresced and diagenetic alteration could be imaged. The second part of the study used human samples as a means of imaging and mapping diagenetic alterations. The second part of the study used 13 samples, including 4 clinical, 7 ancient, and 2 modern controls. The pig study used Basic Fuchsin and SlowFade Gold stains, while the human study used toluidine blue. Images were also taken with unstained elements. The results of the non-human study found that a fresh bone fluoresced differently than that of a 5-year subset, while the results of the human study confirmed these findings and determined that the bone diagenesis can be mapped using LSCM.     

Surface-enhanced Raman spectroscopy enables confirmatory detection of dyes on hair submerged in hypolimnion water for up to twelve weeks

Difficulties in the localization of bodies of homicidal or drowning victims in natural water result in their submergence for weeks if not months. Water insects and microbes drastically change the body's appearance, which significantly changes the determination of a victim's identity. DNA analysis is commonly used for identifying the decedent; however, this PCR-based approach is time-consuming and destructive of the evidence. Considering that nearly half of the people in the world dye their hair with a variety of permanent and semi-permanent dyes, one can expect that confirmatory identification of dyes on the body's hair can be used to shed light on the victim's identity. A growing body of evidence suggests that surface-enhanced Raman spectroscopy (SERS) can be used to detect and identify hair dyes. In this study, we investigated the extent to which SERS could be used to detect black and blue, permanent and semi-permanent dyes on hair submerged in hypolimnion water for up to twelve weeks. We found that SERS enabled 100% accurate identification of analyzed dyes on hair submerged in hypolimnion water for up to 8 weeks, whereas, on average, 87% accurate identification of the hair dyes could be achieved on hair exposed for 10 weeks and 50% for hair exposed 12 weeks in hypolimnion water. We also found that the aqueous environment caused progressive fading of some dyes, whereas other dyes showed substantial spectral transformations after prolonged submergence. Finally, we found that changes in the intensity of vibrational bands of dyes could be used to predict the duration of submergence of colored hair in hypolimnion water.     

Carbon‐Based Fingerprint Powder as a One‐Step Development and Matrix Application for High‐Resolution Mass Spectrometry Imaging of Latent Fingerprints

Carbon‐based materials are often used as matrices for matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) and its imaging (MALDI‐MSI). However, researchers have refrained from using carbon‐based fingerprint powder (CFP) as a matrix due to high background and contamination. In this work, the compatibility of CFP is reevaluated with MALDI‐MSI using a high‐resolution mass spectrometer (HRMS) and compared to traditional organic matrices. Relevant fingerprint compounds were easily distinguished from carbon cluster peaks when using HRMS. For fair comparison, half of a fingerprint was dusted with CFP while the other half was dusted with traditional organic matrices. All compounds studied had comparable, or higher, signal‐to‐noise (S/N) ratios when CFP was used as the matrix. Additionally, chemical image qualities closely followed the trend of S/N ratios. CFP proved to be an effective one‐step development and matrix application technique for MALDI‐MSI of latent fingerprints, when carbon cluster peaks are well separated by a HRMS.