Detection of visible and latent fingerprints using micro-X-ray fluorescence elemental imaging

Using micro-X-ray fluorescence (MXRF), a novel means of detecting fingerprints was examined in which the prints were imaged based on their elemental composition. MXRF is a nondestructive technique. Although this method requires a priori knowledge about the approximate location of a print, it offers a new and complementary means for detecting fingerprints that are also left pristine for further analysis (including potential DNA extraction) or archiving purposes. Sebaceous fingerprints and those made after perspiring were detected based on elements such as potassium and chlorine present in the print residue. Unique prints were also detected including those containing lotion, saliva, banana, or sunscreen. This proof-of-concept study demonstrates the potential for visualizing fingerprints by MXRF on surfaces that can be problematic using current methods.     

Three-dimensional surface topography acquisition and analysis for firearm identification

In the last decade, computer-based systems for the comparison of microscopic firearms evidence have been the subject of considerable research work because of their expected capability of supporting the firearms examiner through the automated analysis of large amounts of evidence. The Integrated Ballistics Identification System, which is based on a two-dimensional representation of the specimen surface, has been widely adopted in forensic laboratories worldwide. More recently, some attempts to develop systems based on three-dimensional (3D) representations of the specimen surface have been made, both in the literature and as industrial products, such as BulletTRAX-3D, but fundamental limitations in achieving fully automated identification remain. This work analyzes the advantages and disadvantages of a 3D-based approach by proposing an approach and a prototype system for firearms evidence comparison that is based on the acquisition and analysis of the 3D surface topography of specimens, with particular reference to cartridge cases. The concept of 3D virtual comparison microscope is introduced, whose purpose is not to provide fully automated identification, but to show how the availability of 3D shape information can provide a whole new set of verification means, some of them being described and discussed in this work, specifically, visual enhancement tools and quantitative measurement of shape properties, for supporting, not replacing, the firearm examiner in reaching the final decision.     

Taphonomy of child-sized remains: a study of scattering and scavenging in Virginia, USA

Child-sized pig carcasses (Sus scrofa) were placed in surface deposit and buried scenarios in a wooded area of Virginia from May 1998 through December 2000, to examine the taphonomic effects of decompositional changes, predator scavenging, and the extent of remains scattering. Changes were observed through on-site examination, charting of remains, and recorded video imaging. Analysis of data revealed that utilization of corpses as food sources by vertebrates was dependent upon invertebrate colonization. Vertebrates avoided feeding on the corpses while invertebrate colonization was active, and would feed before invertebrates successfully colonized a corpse, or would wait until the invertebrate populations migrated away from the corpse. Among vertebrates, there was no apparent succession order for the animals utilizing the remains as a food source. Different vertebrates would feed at different times based upon diurnal or nocturnal predilection. Analysis noted an accidental cooperative relationship between the invertebrates and vertebrates scavenging on the corpses. Certain vertebrates gained access to the internal tissues by utilizing openings in the corpses caused by invertebrate and other vertebrate scavenging. Alternately, carrion-frequenting insects were afforded access to previously inaccessible colonization sites as a result of scavenging vertebrate activities.     

Lead-free primer residues: a qualitative characterization of Winchester WinClean, Remington/UMC LeadLess, Federal BallistiClean, and Speer Lawman CleanFire handgun ammunition

The elemental composition and postfiring residues of several "lead-free" or "nontoxic" centerfire handgun ammunition types currently available to the general public were examined. Offerings from Winchester, Remington/UMC, Federal and Speer were obtained from retail sources in both .45 ACP and 9 mm when possible. A total of 112 postfiring residue samples (SEM pins) were collected at varying distances from the muzzle, at two distances from target and from the shooter's hands. An additional 20 samples were collected by direct ignition of primers. Qualitative determinations were carried out using scanning electron microscopy (SEM)/electron dispersive spectrometry (EDS) analysis. All types tested contained aluminum (Al), silicon (Si), copper (Cu), and zinc (Zn). Most contain traces of sulfur and calcium. Winchester WinClean and Remington LeadLess contained potassium as the principle ingredient. Federal BallistClean contained barium, while Speer Lawman CleanFire contained strontium. In the main, these compared favorably with manufacturers' MSDS publications and patents granted. The characterizations undertaken here will be of use to the forensic electron microscopist as these formulations gain popularity.     

Elemental analysis of human cremains using ICP-OES to classify legitimate and contaminated cremains

The Tri-State Crematory Incident in Nobel, GA (February 2001) revealed limitations in traditional human cremated remains (cremains) analytical methodology. The goal of this study was to develop a method for effectively classifying questionable sets of cremains as legitimate or contaminated. Eighty-eight samples of known human cremains, concrete, mixtures of the two, and questionable sets of cremains were acid digested and analyzed for 21 elements by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES). Variable cluster and principle component analyses identified the seven elements (Sb, B, Li, Mn, Sr, Tl, and V) used to develop discriminant functions to classify questionable sets into two groups: cremains and concrete. The discriminant analysis shows that at the 0.90 probability level, mixtures of 50% or less human content were classified as concrete. Mixtures with 90% human content classified as cremains. Sixty percent and 75% human content mixtures remained in the questionable classification, but as the concentration of human increased in the mixture, the probability of assignment to the known cremains group increased. Most of the questionable human samples classified as cremains. This is a pilot study and cannot yet satisfy Daubert standards for courtroom admissibility, but it indicates that it is possible to determine the legitimacy of cremains using elemental analysis by ICP-OES coupled with multivariate statistical analysis.     

Frequencies of morphological characteristics in two contemporary forensic collections: implications for identification

Positive identification relies on comparison of antemortem and postmortem data. Some identifications are based on morphological features such as fracture, pathological condition, and surgical hardware, despite little literature indicating the frequencies of such traits. This study examines whether such features are sufficiently rare as to be deemed individualizing. Data were collected on two modern North American skeletal collections (N=482 individuals). Presence/absence of features was scored by skeletal element and side. Results indicate that frequencies vary by geographic region (higher frequency of fractures and pathological conditions in New Mexico while individuals in Tennessee were more likely to have surgical interventions), many features such as fractures are remarkably common and that even suites of traits may not be individualizing. Caution is warranted when using written data rather than radiographic comparisons as the primary source of identification. The implications of these findings to missing person databases are also discussed.     

近红外显微分光光度法鉴别油漆的研究

本文借助显微分光光度计系统在近红外区域对几种“色觉”相似的油漆样品进行了光谱学分析。结果表明，近红外显微分光光度计能有效地鉴别颜色相似的油漆。该法准确、可靠，且不破坏检材．对实际检案有重要意义。     

103名中国汉族唇纹特征分析

本文分析了103名中国汉族人的唇纹特征,其中男性57人,女性46人,年龄范围为22～58岁。按照金子·丑之助提出的分类方法,对中国汉族人的唇纹进行了分类,并进行了统计分析,得出了中国汉族各型唇纹的分类,并且比较了唇纹的性别差异和上下唇之间的差异。中国人唇纹的类型男性以Ⅲ型为高,女性以Ⅰ型为高。     

MSCT及图像后处理在鼻骨骨折法医鉴定中的应用

目的探讨多层螺旋CT(MSCT)及图像后处理在鼻骨骨折法医学鉴定中的应用价值。方法采用MSCT对134例被鉴定人进行薄层扫描并行多平面重建(MPR)和表面遮盖成像(SSD)。比较MSCT与常规X线诊断结果。结果线型骨折55(41.04%)例,粉碎型骨折46例(34.33%),凹陷型骨折27例(20.15%),未见骨折6例(4.48%)。X线平片及CR片漏、误诊48例(35.82%)。MSCT正确诊断133例(99.25%)。两者诊断结果存在显著差异(χ2=45.0816,P<0.001)。结论MSCT及后处理图像应作为鼻骨骨折法医鉴定的主要依据。     

受贿罪客观方面比较研究——以“职务行为”、“受贿方式”为中心

“职务行为”、“受贿方式”是受贿罪客观方面的重要组成部分。职务行为从主体上看包括本人及他人的职务,从时间上看只指利用现时职务的便利,刑法应增设职前受贿罪和职后受贿罪;受贿方式包括收受、期约、索取等三种。