4种影像学检查方法应用于肩关节损伤法医学鉴定的比较

目的 评价X线、CT、MRI及CT气-碘双对比造影4种方法在肩关节损伤法医学鉴定中的应用价值.方法通过对肩关节损伤患者行X线摄片、CT扫描、MRI成像与CT气-碘双对比造影检查,观察、分析4种方法所得的影像学资料.结果 X线摄片对骨折的诊断率为52.8%,对软组织损伤的诊断率为0%;CT对骨折的诊断率为72.0%.对软...     

计算机X线成像测量青少年四肢长骨推算身高

目的 应用计算机X线成像(computed radiographv,CR)测量活体上肢骨及胫腓骨正位片上相关指标,建立适合当代中国四川地区汉族14～18岁人群运用上肢骨及胫腓骨推算身高的数学模型.方法 对194例14～18岁四川汉族健康青少年进行左侧肢体上肢骨及胫腓骨正位摄片,测量特定标志点间距离,同时准确测量其身高....     

Virtual autopsy and forensic identification-practical application: a report of one case

The body of an unidentified elderly woman was found trapped in a floodgate. Prior to autopsy, full-body multislice computed tomography (MSCT) was performed for study of bone lesions and cause of death. Age was estimated by analysis of the sternal end of the fourth rib and of the pubic symphyseal medial articular surfaces. The results were then compared with the autopsy findings. MSCT was superior to autopsy in diagnosis of traumatic bone lesions and also revealed dental anomalies and signs of drowning. Age estimation gave a similar result for both methods. This case report illustrates the potential value of MSCT for medico-legal investigations of death: diagnosis of injuries, possibility of determining the cause of death, and anthropological study in order to estimate age or to visualize features likely to enable identification of a corpse.     

Contributions from Forensic Imaging to the Investigation of Upper Cervical Fractures

Abstract: Injuries to the upper cervical spine (UCS) are common in traumatic deaths and postmortem computed tomography (PMCT) may contribute to the forensic investigation. This study presents PMCT in comparison with autopsy in the examination of UCS injury. Thirteen consecutive cases with UCS fracture and/or cranio‐cervical dislocation were examined with PMCT and autopsy, and the findings were correlated. Neither of the techniques identified all UCS injuries. Fractures of atlas and axis were best visualized with PMCT whereas cranio‐cervical dislocation was better identified during autopsy. Serious injuries were present after both high‐ and low‐energy trauma. Medico‐legal autopsy in combination with PMCT produced a thorough evaluation of UCS injuries. By combining these procedures detailed investigations, including accident reconstruction and injury pattern analysis, can be performed. This study supports the routine application of PMCT, as a supplement to the medico‐legal autopsy of deaths with UCS injuries.     

多层螺旋CT在交通事故损伤生物力学分析中的应用

目的探讨多层螺旋CT(multi-slice computed tomography,MSCT)及三维重建技术在交通事故损伤生物力学分析方面的应用价值。方法以真实案例为基础,通过MSCT扫描获得尸体断层影像,进行三维图像重建,结合尸体解剖、车辆勘验等结果综合分析交通事故撞击、碾压和挤压等行为方式中的生物力学过程,并与尸体解剖结果进行对比。结果 MSCT和三维重建获得了不同受力部位骨折的位置、骨折线走向以及骨内碎裂状况等原位特征,其对于骨折的精细还原优于尸体解剖。结论 MSCT和三维重建技术在原位特征的再现、图像的易操作性以及证据的保全等方面凸显优势,可对道路交通事故损伤生物力学分析起补充和引导作用。     

Myocardial Bridging: A Meta‐Analysis of Prevalence

The main objective of this article was to analyze prevalence data about myocardial bridging (MB) in published studies. To this purpose, we performed a meta‐analysis of studies published in English literature that contained data about the prevalence of MB and its anatomical characteristics. The overall prevalence was 19% (CI: 17–21%); autopsy studies revealed an overall prevalence of 42% (CI: 30–55%), CT studies 22% (CI: 18–25%), and coronary angiography 6% (CI: 5–8%). Most bridges were located on the left anterior descending artery (82% overall, 63% on autopsy studies), had a mean thickness of 2.47 mm and a mean length of 19.3 mm. In conclusion, autopsy studies should be the gold standard in evaluating the actual prevalence of myocardial bridges, while in vivo high‐resolution CT scanning should be preferred to coronary angiography studies.     

基于腰椎高度X线测量技术推断四川汉族女性身高

目的通过腰椎高度X线测量技术,建立四川汉族女性身高的数学模型,为法医人类学研究积累基础数据。方法收集206例四川汉族女性个体按年龄分为A、B、C 3组,其中A组(206例)不分年龄,B组(116例)为20~45岁,C组(90例)为45岁以上,并应用计算机X线摄影(computer radiography,CR)技术分别测量所有样本腰椎CR片中5个椎体(L1~L5)前缘、后缘、中央高度(x1~x15),脊柱腰段中央总长度(x16),同时测量每个个体真实身高,对各测量指标联合与身高的相关性进行线性回归分析,建立推断身高的数学模型,并重新选取62例样本代入数学模型,检验模型的准确性。结果所建立的数学模型经线性回归模型假设检验,均具有统计学意义(P0.05),回归方程的推断标准误为2.982~5.004cm,相关系数为0.370~0.779,复相关系数为0.533~0.834。对每组相关系数、复相关系数最高的方程进行回代检验,其中A组的y=100.33+1.489 x3-0.548 x6+0.772 x9+0.058 x12+0.645 x15的准确率最高,为80.6%(±1SE)、100%(±2SE)。结论本研究建立的数学模型适用于推断四川汉族女性身高。     

FACE‐R—A 3D Database of 400 Living Individuals' Full Head CT‐ and Face Scans and Preliminary GMM Analysis for Craniofacial Reconstruction

In the past, improvements in craniofacial reconstructions (CFR) methodology languished due to the lack of adequate 3D databases that were sufficiently large and appropriate for 3‐dimensional shape statistics. In our study, we created the “FACE‐R” database from CT records and 3D surface scans of 400 clinical patients from Hungary, providing a significantly larger sample that was available before. The uniqueness of our database is linking of two data types that makes possible to investigate the bone and skin surface of the same individual, in upright position, thus eliminating many of the gravitational effects on the face during CT scanning. We performed a preliminary geometric morphometric (GMM) study using 3D data that produces a general idea of skull and face shape correlations. The vertical position of the tip of the (soft) nose for a skull and landmarks such as rhinion need to be taken into account. Likewise, the anterior nasal spine appears to exert some influence in this regard.     

The Use of CT Scans in Estimating Age at Death by Examining the Extent of Ectocranial Suture Closure

We examined the utility of CT scans in the evaluation of degree of ectocranial suture closure. Five cranial points (left and right midcoronal positions, left and right midlambdoidal positions, and the lambda) were evaluated in 231 CT scans using a three‐point scoring system (open, partial closed, and closed). The slice increment and thickness varied between three groups of the scans. The results showed a good correlation between degree of suture closure and increasing age in each group. Young individuals (<40 years) and old individuals (>60 years) could be clearly distinguished from the middle‐aged individuals. ANOVA test revealed no difference between two groups of scans and between left and right sides (p > 0.05). Interobserver agreement was good, especially considering the score by sides. The results of this study create the base for developing a robust and simple method to estimate the age at death using CT scans.     

Is Differentiation of Frequently Encountered Foreign Bodies in Corpses Possible by Hounsfield Density Measurement?

Abstract:  The radiological determination of foreign objects in corpses can be difficult if they are fragmented or deformed. With multislice computed tomography, radiodensities—referred to as Hounsfield units (HU)—can be measured. We examined the possibility of differentiating 21 frequently occurring foreign bodies, such as metals, rocks, and different manmade materials by virtue of their HU values. Gold, steel, and brass showed mean HU values of 30671–30710 (upper measurable limit), mean HU values for steel, silver, copper, and limestone were 20346, 16949, 14033, and 2765, respectively. The group consisting of objects, such as aluminum, tarmac, car front-window glass, and other rocks, displayed mean HU values of 2329–2131 HU. The mean HU value of bottle glass and car side-window glass was 2088, whereas windowpane glass was 493. HU value determination may therefore help in preautopsy differentiation between case-relevant and irrelevant foreign bodies and thus be useful for autopsy planning and extraction of the objects in question.