Molecular Identification of Necrophagous Dermestes Species in South Korea Using Cytochrome c Oxidase Subunit I Nucleotide Sequences (Genus Dermestes)

Species identification of necrophagous insects found on a dead body is an essential key in applying medicolegal entomology to the estimation of postmortem interval (PMI). Due to limited morphological identification of insect evidence, several studies have identified species using molecular information such as DNA markers. While considerable cytochrome c oxidase subunit I (COI) gene sequence data of necrophagous fly species have been collected and annotated, those of necrophagous beetle species have not. Since necrophagous beetles such as Dermestes species have a larval period longer than that of flies, beetles are useful in even the late decomposition phase in estimating minimum PMI. To obtain the full-length COI gene sequences of six Dermestes species collected from South Korea, we designed primers for polymerase chain reaction amplification and sequencing. The obtained full COI nucleotide sequences were used for performing phylogenic analysis and comparison with previously reported sequences. The results demonstrated that the COI gene sequences could be used to identify forensically important Dermestes species in South Korea.     

Simplified Direct PCR Method for Reference Buccal Samples Using a Non-FTA Card by Omitting the Pretreatment Step

When using non-FTA cards in commercial multiplex STR kits for direct PCR, pretreatment steps with specific buffers are recommended. Here, we designed a rapid direct PCR method utilizing a non-FTA card, Oral Cell Sampling Kit, by omitting the pretreatment step involving Prep-n-Go™ Buffer, and it showed compatibility with the GlobalFiler™ Express PCR Amplification Kit, GlobalFiler™ PCR Amplification Kit, and PowerPlex^® Fusion system. To optimize the PCR conditions, we tested the method with different final PCR volumes and cycles. Finally, we conducted a performance test using 50 Korean buccal samples and confirmed the high performance of the method, detecting more than 90% of the samples with full profiles when using GlobalFiler™ PCR Amplification Kit and PowerPlex^® Fusion system at 29 cycles in a 10 μL final PCR volume. Thus, we report a simple direct PCR set-up to analyze reference samples collected using a non-FTA card manufactured in Korea.     

Economic voting in South Korea: The 1988 assembly elections

The 1988 Assembly elections in South Korea provide an opportunity to explore whether voting based on short-term economic fluctuations was a feature of the elections. The research design regresses party votes from a large sample of the 224 electoral districts against several well-known determinants of Korean voting behavior (regionalism, urban-rural residence, and social class), as well as district unemployment rates and levels and changes in income. With traditional explanations of voting behavior held constant, income variables had no apparent influence on the vote. However, the coefficients for unemployment rates are large, statistically significant, and in a direction entirely consistent with the theory of rational economic voting. There are grounds for including short-term economic variables in future modeling of Korean electoral behavior.     

Forensic integrity verification of video recordings based on MTS files

Digital video is used in criminal trials as evidence with legal responsibility because video content vividly depicts events occurring at a crime scene. However, using sophisticated video editing software, assailants can easily manipulate visible clues for their own benefit. Therefore, the integrity of digital video files acquired or submitted as evidence must be ensured. Forensic analysis of digital video is key to ensuring the integrity of links with individual cameras. In this study, we analyzed whether it is possible to ensure the integrity of MTS video files. Herein, we propose a method to verify the integrity of MTS files encoded by advanced video coding high definition (AVCHD), which is frequently used for video recording. To verify MTS file integrity, we propose five features. Codec information, picture timing, and camera manufacture/model are modified AVI and MP4-like format video verification features. Group of pictures and Universally Unique Identifier patterns were specifically developed for MTS streams. We analyzed the features of 44 standard files recorded using all recording options of seven cameras. We checked whether integrity can be validated on unmanipulated videos recorded in various environments. In addition, we considered whether manipulated MTS files edited in video editing software could be validated. Experimental results show that all unmanipulated and manipulated MTS files with known recording devices were discriminated only when all five features were checked. These results show that the proposed method verifies the integrity of MTS files, strengthening the validity of MTS file-based evidence in trials.     

Juror adjustments to the reasonable doubt standard of proof

The standard of proof beyond a reasonable doubt is based on the law's primary motivation to avoid false conviction even at the expense of increasing the probability of false acquittal. Individual jurors, however, have common sense motivations to make factually correct decisions by avoiding both types of error. As a result jurors may interpret the standard of reasonable doubt correctly but deviate from that interpretation in predictable ways when they apply the standard in court. This study makes three hypotheses: (1) jurors are less confident when deciding on acquittal than when deciding upon conviction, (2) conviction is associated with a downward adjustment of the interpreted stringency of the standard at the time of application, and (3) a highly stringent interpretation of the standard is associated with a severe downward adjustment of that stringency at the time of application. The study asked 260 juror-eligible participants to examine a trial scenario. The participants first interpreted the stringency of the legal standard on a probability scale. They then judged the probability of the defendant's guilt, decided on a verdict, and rated their confidence in that verdict. The findings strongly supported all three hypotheses. Application and implication of the study were discussed.     

Raising Seoul's global competitiveness: developing key performance indicators

This paper develops a set of key performance indicators (KPIs) for Seoul city administration, inaugurated in 2006. Proper establishment and application of the KPIs into its administration would not only help in accomplishing municipal leadership's strategic initiations but also enhance Seoul's global competitiveness. At the same time, the KPIs can be a good communication tool through which the leadership and city customers can communicate with each other.     

Application of Volume‐of‐Fluid Method to Analyze the Viscosity Effect on the Spine Formation of Bloodstains

In bloodstain pattern analysis, the blood droplet volume and surface impact velocity play an important role, and many related experimental studies have been carried out. If an appropriate computational fluid dynamics (CFD) model that could solve bloodstain patterns, especially spine formation bloodstain patterns, can be obtained, the blood droplet volume and impact speeds at various crime scenes can be predicted more accurately. For this purpose, Flow‐3D software using the volume‐of‐fluid method was applied to analyze the behavior of human blood droplets during an impact event, especially focusing on the viscous effect on splashing, which forms the spine which can be used to predict the impact velocity. To obtain a non‐Newtonian viscosity model of blood for a computational fluid dynamic analysis, the venous blood samples of 163 people were tested using a hemorheology instrument. Among the venous blood samples of 163 people, 37 samples for which all blood test results were in a normal range were selected for the non‐Newtonian viscosity modeling. From the CFD analysis, it could be concluded that a non‐Newtonian viscosity model is more appropriate than a constant viscosity model for predicting splashing that forms the spine. The gradient of the non‐Newtonian model at a high shear rate has more of an effect on spine formation than that at a low shear rate. The lowest viscosity with a high velocity at the outer front of the radiating flow plays an important role in forming the splashing pattern.     

An Explosion of a CNG Fuel Vessel in an Urban Bus

Abstract: An investigation is presented of the explosion of a CNG (compressed natural gas) fuel vessel, called a liner, in an urban bus. The explosion happened at a gas station 10 min after filling was completed. There were no traces of soot and flames at the failed liner, which would be indicative of explosion by ignition of the gas. The filling process of the station was automatically monitored and recorded in a computer. There was no unusual record of the filling system that indicated excess pressure at the time of the accident. There were cracks on the liner that were initiated at the outer surface of the cylindrical shell located at a point 4 cm above the lower dome where cracks did not originate easily as a result of overload. Chemical analysis was performed on a specimen that was cut from the liner, and there was no peculiarity in the mix. Mechanical analysis was performed on the specimens and showed that the hardness was not in the specified range because of inadequate heat treatment of the metal. The hardness of the liner was strictly controlled in the manufacturing process. All the liners that were manufactured at the same period with the failed liner were recalled for examination.     

Application of 3D Laser Scanner to Forensic Engineering

In the case of building collapses and overturned structures, a three‐dimensional (3D) collapse or overturn model is required to reconstruct the accident. As construction sites become increasingly complex and large, 3D laser scanning is sometimes the best tool to accurately document and store the site conditions. This case report presents one case of a structure collapse and one case of an overturned crane reconstructed by a 3D laser scanner. In the case of structural collapse of a prefabricated shoring system, a 3D model reconstructed all the members successfully, a task that is nearly impossible using a scale such as a tape measure. The reconstructed prefabricated shoring system was verified through a structural analysis through comparison with the construction drawings to investigate faults in construction. In the case of the overturned crane, the jib angle and other major dimensions were successfully acquired through 3D laser scanning and used to estimate the working radius. As a result, the propriety of the working radius with the given lifting load was successfully determined.     

Forged seal detection based on the seal overlay metric

This paper describes a method for verifying the authenticity of a seal impression imprinted on a document based on the seal overlay metric, which refers to the ratio of an effective seal impression pattern and the noise in the neighborhood of the reference impression region. A reference seal pattern is obtained by taking the average of a number of high-quality impressions of a genuine seal. A target seal impression to be examined, often on paper with some background texts and lines, is segmented out from the background by an adaptive threshold applied to the histogram of color components. The segmented target seal impression is then spatially aligned with the reference by maximizing the count of matching pixels. Then the seal overlay metric is computed for the reference and the target. If the overlay metric of a target seal is below a predetermined limit for the similarity to the genuine, then the target is classified as a forged seal. To further reduce the misclassification rate, the seal overlay metric is adjusted by the filling rate, which reflects the quality of inked pattern of the target seal. Experiment results demonstrate that the proposed method can detect elaborate seal impressions created by advanced forgery techniques such as lithography and computer-aided manufacturing.