Development of a Novel Finger-Trigger Interface for Trigger Pull Measurement

Trigger pull is the force that needs to be exerted on the trigger to discharge a firearm. The measurement of trigger pull can assist in the evaluation of the safety, function, and manufacturing characteristics associated with a firearm during the forensic firearm examination process. Nonetheless, the accuracy and uncertainty of trigger pull measurements may be affected by the measuring device, test procedure, and environmental conditions. In this work, an innovative finger-trigger interface device was developed to facilitate accurate trigger pull measurements. The idea was to reduce the variation related to the position of the measurement device on the trigger in existing measuring methods and devices. Three force sensors based on different technologies were initially evaluated. While two of the three sensors failed to produce data, the miniature capacitive plate sensor exhibited high precision and a linear response over the range of typical trigger pulls. To examine the effects of the finger-trigger interface on trigger pull measurement, different sensor housing prototypes were designed in silico and 3D printed for the construction of three finger-trigger interface devices. The performance of each finger-trigger interface device was evaluated by measuring the trigger pulls of several selected firearms and comparing the data to a previously published study. Our preliminary results demonstrated the novel finger-trigger interface device offered a new way to measure trigger pull in situ with acceptable accuracy and precision.     

民爆公共安全研究的理论价值

新时期我国民爆公共安全问题日趋严重,迫切需要开展对民爆公共安全本质、规律的研究。对民爆公共安全的研究,是战略机遇期社会稳定的需要,是维护国家安全的需要,是完善和发展公安学科的需要,也是新时期公安工作的迫切需要。     

Bank security dye packs: synthesis, isolation, and characterization of chlorinated products of bleached 1-(methylamino)anthraquinone

Banknote evidence is often submitted after a suspect has attempted to disguise or remove red dye stain that has been released because of an anti-theft device that activates after banknotes have been unlawfully removed from bank premises. Three chlorinated compounds have been synthesized as forensic chemical standards to indicate bank security dye bleaching as a suspect's intentional method for masking a robbery involving dye pack release on banknotes. A novel, facile synthetic method to provide three chlorinated derivatives of 1-(methylamino)anthraquinone (MAAQ) is presented. The synthetic route involved Ultra Clorox bleach as the chlorine source, iron chloride as the catalyst, and MAAQ as the starting material and resulted in a three-component product mixture. Two mono-chlorinated isomers (2-chloro-1-(methylamino)anthraquinone and 4-chloro-1-(methylamino)anthraquinone) and one di-chlorinated compound (2,4-dichloro-1-(methylamino)anthraquinone) of the MAAQ parent molecule were detected by gas chromatography mass spectrometry (GC-MS), and subsequently isolated by liquid chromatography (LC) with postcolumn fraction collection. Although GC-MS is sensitive enough to detect all of the chlorinated products, it is not definitive enough to identify the structural isomers. Liquid-state nuclear magnetic resonance (NMR) spectroscopy was utilized to elucidate structurally the ortho- and para-mono-chlorinated isomers once enough material was properly isolated. A reaction mechanism involving iron is proposed to explain the presence of chlorinated MAAQ species on stolen banknotes after attempted bleaching.     

Mini-Stimulus to Fuel Reforms

正At the present time,China is in need of economic stimulus,a fact testified to by the struggling branches of some banks and the sluggish manufacturing industry.The country should no longer base its optimistic mood solely on the explosive growth of the information technology(IT)and e-commerce industries.Without the upgrading of its manufacturing sector,China’s economy will     

Forensic analysis of smart TV: A current issue and call to arms

A number of new entertainment systems have appeared on the market that have embedded computing capabilities. Smart Televisions have the ability to connect to networks, browse the web, purchase applications and play games. Early versions were based on proprietary operating systems; newer versions released from 2012 are based on existing operating systems such as Linux and Android. The question arises as to what sort of challenges and opportunities they present to the forensics examiner. Are these new platforms or simply new varieties of existing forms of devices? What data do they retain and how easy is it to access this data? This paper explores this as a future forensic need and asks if we are missing potential sources of forensic data and to what degree we are ready to process these systems as part of an investigation.     

Windows Surface RT tablet forensics

Small scale digital device forensics is particularly critical as a result of the mobility of these devices, leading to closer proximity to crimes as they occur when compared to computers. The Windows Surface tablet is one such device, combining tablet mobility with familiar Microsoft Windows productivity tools. This research considers the acquisition and forensic analysis of the Windows Surface RT tablet. We discuss the artifacts of both the Windows RT operating system and third-party applications. The contribution of this research is to provide a road map for the digital forensic examination of Windows Surface RT tablets.     

Evaluation of canine training aids containment for homemade explosive and components by headspace analysis and canine testing

While canines are most commonly trained to detect traditional explosives, such as nitroaromatics and smokeless powders, homemade explosives (HMEs), such as fuel–oxidizer mixtures, are arguably a greater threat. As such, it is imperative that canines are sufficiently trained in the detection of such HMEs. The training aid delivery device (TADD) is a primary containment device that has been used to house HMEs and HME components for canine detection training purposes. This research assesses the odor release from HME components, ammonium nitrate (AN), urea nitrate (UN), and potassium chlorate (PC), housed in TADDs. Canine odor recognition tests (ORTs) were used with analytical data to determine the detectability of TADDs containing AN, UN, or PC. Headspace analysis by gas chromatography/mass spectrometry (GC/MS) with solid-phase microextraction (SPME) or online cryotrapping were used to measure ammonia or chlorine, as well as other unwanted odorants, emanating from bulk AN, UN, and PC in TADDs over 28 weeks. The analytical data showed variation in the amount of ammonia and chlorine over time, with ammonia from AN and UN decreasing slowly over time and the abundance of chlorine from PC TADDs dependent on the frequency of exposure to ambient air. Even with these variations in odor abundance, canines previously trained to detect bulk explosive HME components were able to detect all three targets in glass and plastic TADDs for at least 18 months after loading. Detection proficiency ranged from 64% to 100% and was not found to be dependent on either age of material.     

Characterization of an odor permeable membrane device for the storage of explosives and use as canine training aids

The storage and use of explosives is regulated at the state and federal level, with a particular focus on physical security and rigorous accounting of the explosive inventory. For those working with explosives for the training and testing of explosive-detecting canines, cross-contamination is an important concern. Hence, explosives intended for use with canine teams must be placed into secondary storage containers that are new, clean, and airtight. A variety of containers meet these requirements and include screw-top glass jars (e.g., mason jars). However, an additional need from the explosive-detecting canine community is secondary containers that can also be used as training aids whereby the volatiles emitted by explosives are emitted in a predictable and stable manner. Currently, a generally accepted method for the storage of explosives and controlled emission of explosive vapor for canine detection does not exist. Ideally, such containers should allow odor to escape from the training aid but block external contaminates such as particulates or other volatiles. One method in use places the explosive inside a permeable cotton bag when in use for training and then stores the cotton bag inside an impermeable nylon bag for long-term storage. This paper describes the testing of an odor permeable membrane device (OPMD) as a new way to store and deploy training aids. We measured the evaporation rate and flux of various liquid explosives and volatile compounds that have been identified in the headspace of actual explosives. OPMDs were used in addition to traditional storage containers to monitor the contamination and degradation of 14 explosives used as canine training aids. Explosives were stored individually using traditional storage bags or inside an OPMD at two locations, one of which actively used the training aids. Samples from each storage type at both locations were collected at 0, 3, 6, and 9 months and analyzed using Fourier Transform Infrared (FTIR) Spectroscopy and Gas Chromatography–Mass Spectrometry (GC–MS) with Solid-Phase Microextraction (SPME). FTIR analyses showed no signs of degradation. GC–MS identified cross-contamination from ethylene glycol dinitrate (EGDN) and/or 2,3-dimethyl-2,3-dinitrobutane (DMNB) across almost all samples regardless of storage condition. The contamination was found to be higher among training aids that were stored in traditional ways and that were in active use by canine teams.     

超滤管在陈旧生物检材中的应用

目的探讨millipore超滤管滤过方法对陈旧生物检材DNA分型检验的应用价值。方法将23份陈旧血样分别剪取同样合适大小的血片3组,标为A、B、C组,磁珠法提取DNA,分别用80μL、80μL、20μL洗脱液洗脱得到模板DNA,其中A、C组模板直接扩增,B组用millipore超滤管滤过浓缩后扩增。PCR产物用AB3130x L基因分析仪检测,Gene Mapper ID V3.2软件进行自动分型。所得实验数据用SPSS软件分析处理。结果 A组没有1例样本扩出全部STR基因座,B组有18例样本扩出全部STR基因座,C组有11个样本扩出全部STR基因座。结论应用millipore超滤管滤过方法可以明显提高陈旧生物检材的DNA分型成功率。     

公安机关监控民用爆炸物品流向的措施

公安机关为了更好地实现对民用爆炸物品公共安全管理和民用爆炸物品购买、运输、爆破作业的安全监督管理的职能,有效监控民用爆炸物品流向,应通过地方立法,对涉爆企业在民爆物品的供给、运输、需求等方面实行信息验证、公示制度。通过信息公示,增强企业涉爆行为的公开性、透明化,以预防企业从事违反危险物品管理的活动,压缩非法涉爆企业的生存空间,防止民用爆炸物品被非法爆破行为利用。