Case of Fatal Starvation: Can Stable Isotope Analysis Serve to Support Morphological Diagnosis and Approximate the Length of Starvation?

The diagnosis of death as a result of starvation is established on anthropological measurements, visual appearance of the deceased on external and internal examination, microscopic analysis, laboratory testing, and exclusion of other causes of death. Herein, we present our findings on a case of 95‐year‐old man who died of starvation. After the diagnosis of starvation was established by traditional forensic medicine methods, we have conducted retrospective segmental analysis of stable carbon (δ¹³C) and nitrogen (δ¹⁵N) isotope ratios in hair sample. This method reveals periods of starvation through decrease in δ¹³C and increase in δ¹⁵N along the strand of hair. Our analysis revealed the decrease of 0.6 ‰ in δ¹³C during the last 10–12 weeks prior to death, similar as reported in other investigations. Also, a decrease of 0.7 ‰ in δ¹⁵N during the last 8–10 weeks prior to death was determined that was different than observed in previous studies.     

Isotope ratio mass spectrometry as a tool for forensic investigation (examples from recent studies).

The versatility of isotope ratio mass spectrometry is demonstrated by reference to diverse case studies. Variations in the natural isotopic composition of non-biological, organic materials are compared as a means by which samples may be associated or discriminated. These techniques may be used to augment or compliment conventional forensic methodologies. delta13C analysis was used to demonstrate that different masking tape had been recovered in two, apparently similar cases, involving the smuggling of money. Visually similar ecstasy tablets were compared by consideration of the delta13C and delta15N composition of MDMA extracted from the tablets. Although only a limited number of tablets were analysed, the isotopic similarity between two different seizures was sufficient to induce a guilty plea from a person suspected of possessing both. A combination of delta2H, delta13C, delta15N and delta18O together with GC-MS analyses were applied to small samples of seized heroin. Although GC-MS analysis indicated differences between the chemical composition of two of the heroin samples, isotopic analysis suggested similarities, which were confirmed by further delta2H, delta13C and delta18O isotopic analysis of the clingfilm in which the samples were wrapped.     

Optimized conditions for simultaneous determination of opiates, cocaine and benzoylecgonine in hair samples by GC--MS

The present paper describes a qualitative and quantitative method for the simultaneous detection of opiates, cocaine and benzoylecgonine from human hair samples. Every step of the analytical procedure was studied to find the optimized conditions. Nine different incubation systems were examined. The influence of different pH values of samples on the isolation of analytes from the incubation media by Bond Elut cartridges and the stability of the compounds of interest in the different incubation media and conditions were investigated. The extracting power of different incubation media was studied as well. The phosphate buffer 0.1 N at pH 5 was chosen as the extraction medium in an optimized procedure for simultaneous determination of opiates, cocaine and benzoylecgonine in hair samples. The method developed was validated. Recoveries were 90% for morphine (M), 81% for 6-monoacetylmorphine (6-AM), 90% for codeine (CD), 86% for cocaine (C) and 90% for benzoylecgonine (BE). Relative standard deviation for inter-day precision was better than 12%. The limits of detection resulted as 0.05 ng/mg for M and C, as 0.08 for 6-AM and as 0.2 ng/mg for BE. Forty hair samples collected from drug abusers admitted to centers for detoxification treatment were analyzed obtaining 23 positive results for opiates and/or cocaine. Twelve hair specimens longer than 10 cm were analyzed following a sectional approach. In the six positive cases, it was interesting to find that the 6-AM/M ratio generally decreased for each sample from the proximal segment to the distal segments. Moreover, the 6-AM/M ratio was generally lower than 1 in the intermediate and distal segments.     

A test to identify cyanide origin by isotope ratio mass spectrometry for forensic investigation

Cyanide is one of the common poisons in murders. When cyanide has been used, to identify the origin of cyanide may be necessary in the forensic investigation. We have examined the possibility of distinguishing different commercial cyanide samples through the δ(13)C and δ(15)N values and developed a protocol for the isotope analysis of cyanide extracted from several matrices as food and medicine. Several cyanide precipitates were tested for the isotope analysis. The results show that cupric ferrocyanide Cu(2)[Fe(CN)(6)] is the most appropriate precipitate for the analysis. Thirteen batches of KCN and nine batches of NaCN chemicals were randomly chosen from different suppliers. The cyanides were converted to cupric ferrocyanide and then analysed by isotope ratio mass spectrometry coupled to elemental analysis (EA-IRMS). The isotopic signature of the commercial samples varied from -51.96 to -25.77 ‰ for δ(13)C and from -4.51 to +3.81 ‰ for δ(15)N, highlighting the potential of applying EA-IRMS technique to identify cyanide from different batches and sources. The influence of the cyanide extraction and isolation from spiked matrix on the isotopic analysis was also studied. Three matrices: orange juice, yogurt drink and a medicine were tested. In many cases, the isotopic analysis results obtained from the original cyanides precipitates and those isolated from the matrices showed a good accordance, especially for δ(15)N. In some matrices, the (13)C analysis was interfered by co-precipitates. With carefully elaborated working protocol, determining the isotope ratio of N and C in cyanide by EA-IRMS is a promising method for forensic investigations.     

Variation of δ2H, δ18O & δ13C in crude palm oil from different regions in Malaysia: Potential of stable isotope signatures as a key traceability parameter

A total of 33 crude palm oil samples were randomly collected from different regions in Malaysia. Stable carbon isotopic composition (δ¹³C) was determined using Flash 2000 elemental analyzer while hydrogen and oxygen isotopic compositions (δ²H and δ¹⁸O) were analyzed by Thermo Finnigan TC/EA, wherein both instruments were coupled to an isotope ratio mass spectrometer. The bulk δ²H, δ¹⁸O and δ¹³C of the samples were analyzed by Hierarchical Cluster Analysis (HCA), Principal Component Analysis (PCA) and Orthogonal Partial Least Square-Discriminant Analysis (OPLS-DA). Unsupervised HCA and PCA methods have demonstrated that crude palm oil samples were grouped into clusters according to respective state. A predictive model was constructed by supervised OPLS-DA with good predictive power of 52.60%. Robustness of the predictive model was validated with overall accuracy of 71.43%. Blind test samples were correctly assigned to their respective cluster except for samples from southern region. δ¹⁸O was proposed as the promising discriminatory marker for discerning crude palm oil samples obtained from different regions. Stable isotopes profile was proven to be useful for origin traceability of crude palm oil samples at a narrower geographical area, i.e. based on regions in Malaysia. Predictive power and accuracy of the predictive model was expected to improve with the increase in sample size. Conclusively, the results in this study has fulfilled the main objective of this work where the simple approach of combining stable isotope analysis with chemometrics can be used to discriminate crude palm oil samples obtained from different regions in Malaysia. Overall, this study shows the feasibility of this approach to be used as a traceability assessment of crude palm oils.     

The Potential of Isotope Ratio Mass Spectrometry (IRMS) and Gas Chromatography‐IRMS Analysis of Triacetone Triperoxide in Forensic Explosives Investigations

Studying links between triacetone triperoxide (TATP) samples from crime scenes and suspects can assist in criminal investigations. Isotope ratio mass spectrometry (IRMS) and gas chromatography (GC)‐IRMS were used to measure the isotopic compositions of TATP and its precursors acetone and hydrogen peroxide. In total, 31 TATP samples were synthesized with different raw material combinations and reaction conditions. For carbon, a good differentiation and a linear relationship were observed for acetone–TATP combinations. The extent of negative (δ¹³C) fractionation depended on the reaction yield. Limited enrichment was observed for the hydrogen isotope (δ²H) values of the TATP samples probably due to a constant exchange of hydrogen atoms in aqueous solution. For oxygen (δ¹⁸O), the small isotopic range and excess of water in hydrogen peroxide resulted in poor differentiation. GC‐IRMS and IRMS data were comparable except for one TATP sample prepared with high acid concentration demonstrating the potential of compound‐specific isotope analysis. Carbon IRMS has practical use in forensic TATP investigations.     

Practical experiences in application of hair fatty acid ethyl esters and ethyl glucuronide for detection of chronic alcohol abuse in forensic cases

This article presents results from 1872 hair samples, which were analyzed for fatty acid ethyl esters (FAEEs) and ethyl glucuronide (EtG). The results were evaluated in the context of self-reported drinking behavior, the use of hair cosmetics, the gender of the sample donors and hair sample length. For comparison, CDT and GGT in serum were available in 477 and 454 cases, respectively. A number of alcohol abstainers or low moderate drinkers and excessive drinkers were selected for assessment of cut-offs for FAEEs in the proximal 6cm hair segments and for EtG in the proximal 3cm hair segments. Cut-off values were assessed by ROC analysis. It was found that the cut-offs of 1.0ng/mg FAEE and 30pg/mg EtG presently used for excessive drinking lead to a low portion of false positives (4% and 3% respectively) but to a higher portion of false negatives (23% and 25% respectively). Comparison of the mean and medium concentrations in samples without any reported hair cosmetics (N=1079) and in samples with reported use of hair spray (N=79) showed an increase by the factor of about two for FAEE but no significant difference for EtG. Mean values of EtG were decreased by 80% in bleached samples (N=164) and by 63% in dyed samples (N=96). There was no significant effect of bleaching and dyeing on FAEE. Hair gel and hair wax, oil or grease showed no significant effect on both FAEE and EtG. With respect to gender and investigated hair length ambiguous results were obtained because of major differences in the compared subpopulations of male with higher alcohol consumption and mainly shorter hair, and less drinking female with longer hair. For excessive drinkers FAEEs in the 0-6cm hair segment and EtG in the 0-3cm segment decreased with increasing time of reported abstinence before sample collection. These drinkers attain the level of teetotalers only after more than 10 months of abstinence. In comparison to scalp hair, FAEEs recovered from armpit hair and leg hair were lower and from chest hair were higher. EtG in armpit hair was lower and in leg hair higher than in scalp hair. It is concluded that the combined use of FAEE and EtG essentially increases the accuracy of interpretation since both markers complement each other by a different sensitivity to sources of error.     

Analysis of LSD in human body fluids and hair samples applying ImmunElute columns

Immunoaffinity extraction units (LSD ImmunElute) are commercially available for the analysis of lysergic acid diethylamide (LSD) in urine. The ImmunElute resin contains immobilized monoclonal antibodies to LSD. We applied the ImmunElute procedure to serum and also to human hair samples. For hair analysis the samples were first extracted with methanol under sonication. The extracts were then purified using the ImmunElute resin. LSD analysis was carried out with HPLC and fluorescence detection. The immunoaffinity extraction provides highly purified extracts for chromatographic analysis. The limit of detection (signal-to-noise ratio = 3) has been determined to be < 50 pg regardless of which sample material was used. The procedure was applied to authentic hair samples from drug abusers (n = 11). One of these samples tested positive with an amount of 110 pg LSD in 112 mg extracted hair corresponding to a concentration of 1 pg/mg.     

USGS42 and USGS43: human-hair stable hydrogen and oxygen isotopic reference materials and analytical methods for forensic science and implications for published measurement results

Because there are no internationally distributed stable hydrogen and oxygen isotopic reference materials of human hair, the U.S. Geological Survey (USGS) has prepared two such materials, USGS42 and USGS43. These reference materials span values commonly encountered in human hair stable isotope analysis and are isotopically homogeneous at sample sizes larger than 0.2 mg. USGS42 and USGS43 human-hair isotopic reference materials are intended for calibration of δ(2)H and δ(18)O measurements of unknown human hair by quantifying (1) drift with time, (2) mass-dependent isotopic fractionation, and (3) isotope-ratio-scale contraction. While they are intended for measurements of the stable isotopes of hydrogen and oxygen, they also are suitable for measurements of the stable isotopes of carbon, nitrogen, and sulfur in human and mammalian hair. Preliminary isotopic compositions of the non-exchangeable fractions of these materials are USGS42(Tibetan hair)δ(2)H(VSMOW-SLAP) = -78.5 ± 2.3‰ (n = 62) and δ(18)O(VSMOW-SLAP) = +8.56 ± 0.10‰ (n = 18) USGS42(Indian hair)δ(2)H(VSMOW-SLAP) = -50.3 ± 2.8‰ (n = 64) and δ(18)O(VSMOW-SLAP) = +14.11 ± 0.10‰ (n = 18). Using recommended analytical protocols presented herein for δ(2)H(VSMOW-SLAP) and δ(18)O(VSMOW-SLAP) measurements, the least squares fit regression of 11 human hair reference materials is δ(2)H(VSMOW-SLAP) = 6.085δ(2)O(VSMOW-SLAP) - 136.0‰ with an R-square value of 0.95. The δ(2)H difference between the calibrated results of human hair in this investigation and a commonly accepted human-hair relationship is a remarkable 34‰. It is critical that readers pay attention to the δ(2)H(VSMOW-SLAP) and δ(18)O(VSMOW-SLAP) of isotopic reference materials in publications, and they need to adjust the δ(2)H(VSMOW-SLAP) and δ(18)O(VSMOW-SLAP) measurement results of human hair in previous publications, as needed, to ensure all results on are on the same scales.     

Multiple stable isotope characterization as a forensic tool to distinguish acid scavenger samples

Acid scavengers are frequently used as stabilizer compounds in a variety of applications. When used to stabilize volatile compounds such as nerve agents, the lower volatility and higher stability of acid scavengers make them more persistent in a post-event forensic setting. Compound-specific isotope analysis of carbon, nitrogen, and hydrogen in three acid-scavenging compounds (N,N-diethylaniline, tributylamine, and triethylamine) were used as a tool for distinguishing between different samples. Combined analysis of multiple isotopes improved sample resolution, for instance differentiation between triethylamine samples improved from 80% based on carbon alone to 96% when combining with additional isotope data. The compound-specific methods developed here can be applied to instances where these compounds are not pure, such as when mixed with an agent or when found as a residue. Effective sample matching can be crucial for linking compounds at multiple event sites or linking a supply inventory to an event.     

Comparison of bulk and compound-specific δ13C isotope ratio analyses for the discrimination between cannabis samples

Five marijuana samples were compared using bulk isotope analysis compound-specific isotope ratio analysis of the extracted cannabinoids. Owing to the age of our cannabis samples, four of the five samples were compared using the isotope ratios of cannabinol (CBN), a stable degradation product of Δ(9)-tetrahydrocannabinol (THC). Bulk δ(13)C isotope analysis discriminated between all five samples at the 95% confidence level. Compound-specific δ(13)C isotope analysis could not distinguish between one pair of the five samples at the 95% confidence level. All the measured cannabinoids showed significant depletion in (13)C relative to bulk isotope values; the isotope ratios for THC, CBN, and cannabidiol were on average 1.6‰, 1.7‰, and 2.2‰ more negative than the bulk values, respectively. A more detailed investigation needs to be conducted to assess the degree fractionation between the different cannabinoids, especially after aging.     

Simultaneous hair testing for opiates, cocaine, and metabolites by GC-MS: a survey of applicants for driving licenses with a history of drug use

A sensitive GC-MS method for the simultaneous determination of opiates, cocaine, and metabolites in hair at a cut-off level of 0.1 ng/mg was adopted to assess past exposure to these drugs in applicants for driving licenses with a history of drug use. The sampling protocol consisted of collection of one hair (sample A, 5-cm length) and one urine sample. When hair and urine (EMIT Syva, cut-off levels: 0.3 mg/l for opiates, 0.15 mg/l for cocaine, GC-MS confirmation of positives) were both positive or negative the protocol was concluded. In the other cases, the assessment of 'current exposure' to drugs was carried out, in order to avoid seriated random urinalysis, by collecting a second hair sample (sample B) 6 weeks later and analysing the proximal 1-cm segment. Out of the 214 'A' hair samples analyzed, 14 (6.5%) tested positive for morphine and/or 6-acetylmorphine (6AM), and 26 (12%) for cocaine and/or benzoylecgonine (BE), whereas none of the samples tested positive for both drugs. Levels between 0.1 and 1 ng/mg of the single analytes were found in eight out of the 14 morphine-6AM positives (57%) and in 18 out of the 26 cocaine-BE positives (69%). The time course of positive cases showed a progressive decrease of morphine-6AM positives and a corresponding increase of cocaine-BE positives within the study period September 1995-February 1999. No cases with positive urine and negative hair were observed. Among the 40 positive cases, seven (four and three for opiates and cocaine, respectively) were found to be 'currently exposed to drug', four by urinalysis (three and one) and three by analysis of the hair sample B (1 and 2).     

Evaluating the discriminating power of amino acid ratios on distinguishing dark colored hair samples

Human hairs are one of the most commonly encountered items of trace evidence. Currently, conventional methods for hair analysis include microscopic comparison and DNA analysis (nuclear and mitochondrial). Each approach has its own drawbacks. Hair proteins are stable and offer an alternative to DNA testing, as demonstrated with proteomics for distinguishing humans. However, proteomics is complicated and requires identifying peptides to remain intact following harsh sample preparation methods. Alternatively, the actual amino acid content of a hair sample may also offer important identifying information and actually requires proteins and peptides to be broken down completely rather than remaining intact. This study evaluated the discriminating power of using hair amino acid ratios to differentiate hair samples from 10 unrelated individuals with dark colored hair. Hair proteins were digested, derivatized, and analyzed using gas chromatography–mass spectrometry. Amino acid ratios were calculated for each individual and comparisons using ANOVA and post-hoc pairwise t-test with Bonferroni correction were made with amino acid ratios for individuals. Overall, out of the 45 possible pairwise comparisons between all hair samples, 38 (84%) were differentiable. Out of the 36 possible pairwise comparisons between brown haired individuals, 32 (89%) were considered differentiable using univariate statistics. Multivariate statistics were also attempted but, overall, univariate models were sufficient for exclusionary purposes. These results indicate that amino acid ratio analysis can potentially be used as an exclusionary method using hair if DNA analysis cannot be performed, or to corroborate conclusions made following microscopic analysis.     

Results of four inter-laboratory comparisons provided by the Forensic Isotope Ratio Mass Spectrometry (FIRMS) network

Between 2004 and 2008 the Forensic Isotope Ratio Mass Spectrometry (FIRMS) network organised four Inter-Laboratory Camparison excercises with the aim of harmonising and validating isotopic measurements to be used for forensic applications.The samples distributed comprised materials of potential forensic interest such as packaging and pharmaceuticals to be analysed for δ²H, δ¹³C, δ¹⁵N and δ¹⁸O composition. As many as 30 international laboratories participated in these comparisons. Results have shown overall improvements for both within- and inter-laboratory reproducibility with respect to δ¹³C and δ¹⁵N measurements.Only a small number of laboratories returned results for δ²H and δ¹⁸O analysis and these results highlighted a need for improvement in the reproducibility of these measurements and a need to address the exchange of hydrogen between samples and ambient moisture. Results also highlighted the importance of sample preparation procedures and the need to standardise both these procedures and calibration against Standard Reference Materials. Future Inter-Laboratory Comparison exercises will assess the suitability of laboratories to submit data to national and international databases similar to those currently operated for fingerprints, DNA etc.     

Stable carbon and nitrogen isotope ratios of sodium and potassium cyanide as a forensic signature

Sodium and potassium cyanide are highly toxic, produced in large amounts by the chemical industry, and linked to numerous high-profile crimes. The U.S. Centers for Disease Control and Prevention has identified cyanide as one of the most probable agents to be used in a chemical terrorism event. We investigated whether stable C and N isotopic content of sodium and potassium cyanide could serve as a forensic signature for sample matching, using a collection of 65 cyanide samples. Upon analysis, a few of the cyanide samples displayed nonhomogeneous isotopic content associated with degradation to a carbonate salt and loss of hydrogen cyanide. Most samples had highly reproducible isotope content. Of the 65 cyanide samples, >95% could be properly matched based on C and N isotope ratios, with a false match rate <3%. These results suggest that stable C and N isotope ratios are a useful forensic signature for matching cyanide samples.     

Isotopic fractionation of carbon and nitrogen during the illicit processing of cocaine and heroin in South America

The forensic application of stable isotope analysis to cocaine and heroin for geolocation of exhibits must take into account the possible enrichment and/or depletion of 13C and 15N during the illicit manufacturing process. Continuous-flow elemental analysis-isotope ratio mass spectrometry was utilized to measure changes in the stable isotope ratios of carbon and nitrogen for both cocaine (N = 92) and heroin/morphine (N = 81) exhibits derived from illicit manufacturing processes utilized by South American clandestine chemists. In controlled settings in South America, there was no siginficiant carbon isotope fractionation during the conversion of cocaine base to cocaine HCI using current illict methodologies. In contrast, nitrogen isotope fractionation for this conversion was 1 per thousand. There was a kinetic carbon isotope ratio fractionation during the acetylation of Colombian morphine to heroin and as a result heroin exhibits will almost always have more negative delta13C values than the original morphine. There was an isotopic fractionation against 15N during the acetylation of morphine base to heroin base, but this effect was not expressed since all of the heroin base was precipitated during the manufacturing process. However, the clandestine process of converting a single batch of heroin base usually involved two consecutive crops of heroin HCl and the latter crop was isotopically depleted as expected from a Rayleigh distillation process. When heroin was deacetylated to morphine, the morphine produced resulted in delta13C values that were indistinguishable from the original morphine. The kinetic carbon isotope fractionation factor for the South American process of morphine acetylation was -1.8 per thousand, allowing calculation of the delta13C values of the acetic anhydride from deacetylated heroin delta13C values.     

Forensic utility of carbon isotope ratio variations in PVC tape backings

Forensic interest in adhesive tapes with polyvinyl chloride (PVC) backings (electrical tape) derives from their use in a variety of illicit activities. Due to the range of physical characteristics, chemical compositions, and homogeneity within a single roll of tape, traditional microscopic and chemical analyses can offer a high degree of discrimination between tapes, permitting the assessment of potential associations between evidentiary tape samples. The carbon isotope ratios of tapes could provide additional discrimination among tape samples. To evaluate whether carbon isotope ratios may be able to increase discrimination of electrical tapes, particularly with regards to different rolls of tape of the same product, we assessed the δ(13)C values of backings from 87 rolls of PVC-based black electrical tape (~20 brands, >60 products) Prior to analysis, adhesives were removed to prevent contamination by adhering debris, and plasticizers were extracted because of concern over their potential mobility. This result is consistent with each of these tapes having approximately the same plasticizer δ(13)C value and proportion of carbon in these plasticizers. The δ(13)C values of the 87 PVC tape backings ranged between -23.5 and -41.3 (‰, V-PDB), with negligible carbon isotopic variation within single rolls of tape, yet large variations among tape brands and tape products. Within this tape population, carbon isotope ratios permitted an average exclusion power of 93.7%, using a window of +/-0.3‰; the combination of carbon isotope ratio measurement with additional chemical and physical analyses raises the discrimination power to over 98.9%, with only 41 out of a possible 3741 pairs of tape samples being indistinguishable. There was a linear relationship between the δ(13)C value of tape backings and the change in δ(13)C value with the extraction of plasticizers. Analyses of pre- and post-blast tape sample pairs show that carbon isotope signatures are within 0.3‰ of pre-blast values, indicating that carbon isotope values are largely preserved during an explosion.     

Experimental designs in the optimisation of ultrasonic bath-acid-leaching procedures for the determination of trace elements in human hair samples by atomic absorption spectrometry

Experimental designs were used for the optimisation of acid-leaching procedures assisted by ultrasonic energy for the extraction of Ca, Cu, Fe, Mg, Mn and Zn from human hair samples. A Plackett-Burman 2(7) x 3/32 design for seven factors ([HNO3], [HCl], [H2O2], acid/oxidant solution volume, exposure time to ultrasounds, temperature of the ultrasonic bath and hair particle size) was used in order to choose the variables affecting the acid-leaching process. The variables [HNO3], [HCl] and temperature of the ultrasonic bath were found to be the most important parameters for the acid-leaching procedure, and these variables were optimised by a response surface design (central composite design 2(3) + star) which involved 16 experiments. Optimum values in the 3.7-4.2 M range were found for [HNO3], while optimum values between 3.0 and 3.5 M were found for [HCl]. The optimum temperature of the ultrasonic bath was between 80 and 90 degrees C. An acid digestion induced by microwave energy (details given) was used to obtain the total metal concentration and also for comparative purposes. Ca, Cu, Fe, Mg and Zn were measured by flame atomic absorption spectrometry (FAAS) using a conventional air/acetylene flame, while Mn was determined by electrothermal atomic absorption spectrometry (ETAAS) under optimised conditions. Two different reference materials, IAEA-085 International Atomic Energy Agency, Monaco) and NIES No. 13 (National Institute for Environmental Studies, Japan), with certified metal contents for some of the elements investigated, were used in order to verify the accuracy of the methods.     

Correlation of the incidence of cocaine and cocaethylene in hair and postmortem biologic samples

Hair samples are useful as a matrix for drug testing because drugs can be detected in hair for longer periods than in blood or urine. The authors report a prospective comparison of the detection of cocaine and cocaethylene in routine postmortem biologic specimens to the detection of cocaine and cocaethylene in hair. The authors collected hair samples from various areas of the head in 53 autopsy cases, prepared them, and analyzed them by gas chromatography/mass spectrometry (GC/MS) for cocaine and cocaethylene. The authors compared the results of hair analysis with the results of toxicologic analysis performed on routine postmortem samples by enzyme multiplied immunoassay technique and GC/MS. Cocaine was found in either biologic fluids or in hair in 16 of 53 samples tested. Nine samples were positive for cocaine in both biologic fluids and hair. Five samples contained cocaine only in biologic fluids, and two contained cocaine only in hair. Cocaethylene was present in two cases. Drug screening of hair provides additional information in some autopsy cases, but the authors have not made hair analysis a routine practice. It may prove useful to save hair samples in all cases for later analysis if warranted by additional history or autopsy findings.     

Weather-induced changes in cannabinoid content of hair

Authentic hair samples from Cannabis users and a drug free hair sample which was separately spiked with tetrahydrocannabinol (THC), cannabidiol (CBD) or cannabinol (CBN) were exposed outside as well as to natural sunlight at prevailing and elevated humidity in quartz glass tubes during 8 weeks. In addition, authentic and spiked hair samples were exposed to xenon arc radiation in a light exposure cabinet for 24 hours. Stability of THC, CBD and CBN in authentic samples differed from that of the spiked hair. The radiation experiment revealed that CBN could not be measured in hair which had been spiked with THC. Under all conditions chosen the concentrations of THC, CBD and CBN decreased. At high humidity the concentrations declined more rapidly. In both authentic and spiked samples THC was most unstable compared to CBD and CBN. Therefore, in hair analysis determination of CBD and CBN seems promising to detect Cannabis exposure even under unfavorable conditions.