Upon a failure to equal entry and exit wounds: a possible case of tandem bullets in view of the literature

Forensic medicine specialists take account of the projectiles remaining in the body when determining whether there are an equal number of entry and exit wounds. The absence of projectiles should suggest blank cartridges, a single exit wound despite several firings and bullet embolization, whereas the presence of more projectiles than expected may indicate tandem projectiles and multiple projectiles entering through the same hole. Radiological examination of the whole body, follow-up of the bullet trajectories, examination of the clothes, and examination of the gun and projectiles play a key role in solving difficult cases. We review such situations based on a case of tandem bullets. Two 7.65-mm bullets created lethal wounds entering through a 32-year-old victim's neck followed the same trajectory to a certain point and diverted. We discussed the possibilities in cases that show inequalities between entry and exit wounds, in light of relevant literature.     

Forensic-medical significance of the characteristics of gunshot perforating fractures of the skull bones

The study was made of gunshot perforating fractures of calvarial bones in cases of lethal perforating head wounds in long distance shots from a 9-mm Makarov gun. Morphological characteristics of inlet and outlet perforating fractures and bone fragments were found to differ. Gunshot fractures in calvarial bones inflicted by bullets from a 9-mm Makarov gun were studied in experiments with different kinetic energy. In low kinetic energy, bullets make oval holes on the outer table of the skull and round holes on the inner table with radial prominences on the walls of bullet channels, large bone fragments; in moderate kinetic energy--make round holes in the outer table and oval on the inner table with skew prominences on the walls of the outlet part of the channels, large and middle-sized flat bone fragments; in high kinetic energy injuries on both tables were round, prominences were cross, bone fragments were flat, small and middle-sized.     

The nature of the deposit of substances in gunshot injuries from a smooth-bore hunting rifle]

Direct microscopic examinations of plain-barrel hunting gun-shot wounds may reveal on the victim's skin or clothes starch or paraffin particles or impressions thereof (a secondary shell trace). These data may evidence a specific charge of the cartridge and be used to specify the distance from which the shot was made, with an obligatory experimental shot made in each case.     

Accuracy of comparison decisions by forensic firearms examiners

This black box study assessed the performance of forensic firearms examiners in the United States. It involved three different types of firearms and 173 volunteers who performed a total of 8640 comparisons of both bullets and cartridge cases. The overall false-positive error rate was estimated as 0.656% and 0.933% for bullets and cartridge cases, respectively, while the rate of false negatives was estimated as 2.87% and 1.87% for bullets and cartridge cases, respectively. The majority of errors were made by a limited number of examiners. Because chi-square tests of independence strongly suggest that error probabilities are not the same for each examiner, these are maximum-likelihood estimates based on the beta-binomial probability model and do not depend on an assumption of equal examiner-specific error rates. Corresponding 95% confidence intervals are (0.305%, 1.42%) and (0.548%, 1.57%) for false positives for bullets and cartridge cases, respectively, and (1.89%, 4.26%) and (1.16%, 2.99%) for false negatives for bullets and cartridge cases, respectively. The results of this study are consistent with prior studies, despite its comprehensive design and challenging specimens.     

枪弹创后置物射出口形态学的实验研究

为建立后置物射出口与射入口的检验鉴定方法，使用国产五四式7．62mm口径手枪及五六式7．62mm口径半自动步枪，以5米的距离射击约克夏种白猪18只，同时以木板、水泥板、玻璃及衣服等作为射出口衬垫物，制成后置物射出口56例，并与对照组12例射出口进行对比观察。结果表明，射出口与后置物距离在3cm以内均可出现创缘伸展轮及皮下出血，且与后置物质地及距离成正比。根据其形态分为典型及非典型两类，并建立了此类射出口的检验方法及其与射入口鉴别的依据，有助于法医在实际检验中对射击方向的判断。     

Application of true color X-ray vision for electron microscopy in fired bullets and gunshot residue investigation

An X-ray color imaging system was used to study primer particles and fired bullets from different .22 rimfire ammunition. The technique proved to be very useful, allowing a ready, concomitant analysis of the morphology of primer particles and their elemental composition. The investigation of the bottom of fired bullets showed that antimony present in the bullet alloy is not evenly distributed, but organized in plates made up of almost pure antimony. Moreover, particles and other traces adherent to lead bottomed bullets containing elements different from lead, therefore, useful to the understanding of primer composition are readily and easily detected.     

Influence of Muzzle Instability on Bullet Deflection after Perforating Laminated Particleboards

The influence of muzzle instability on bullet deflection, when perforating laminated particleboards, was studied with three different handgun bullet types. The mean deflection angles of .32 Auto FMJ and .38 Special SJHP bullets were calculated to be 0.90° and 0.83°, respectively after perforating particleboards orthogonally at a 1 m muzzle-to-target distance. The mean angles dropped to 0.70° and 0.58° at a 15 m muzzle-to-target distance. The differences in deflection angles proved to be statistically significant (p < 0.05) with p-values of 0.023 and 0.001, respectively. The mean calculated deflection angles of .38 Special LRN bullets also dropped from 1.51° to 1.38° when the muzzle-to-target distance was increased from 1 to 15 m, but this difference was not significant (p-value of 0.357). The results support the hypothesis that muzzle instability has an influence on deflection. The possible implications for shooting incident reconstructions and for future research are discussed.     

A calculation of the theoretical significance of matched bullets

Abstract:  The comparison and identification of bullets from the striations that appear on their surfaces, after they have been fired from a gun, have been practiced since the 1920s. Although the significance of the correspondences of these impression marks has been empirically justified, there is a conspicuous absence of any theoretical foundation for the likelihood. What is presented here is the derivation of the formulae for calculating the probability for the correspondence of the impression marks on a subject bullet to a random distribution of a similar number of impression marks on a suspect bullet of the same type. The approach to the calculation entails subdividing the impression marks into a series of individual lines having widths equal to the separation distance at which a misalignment of striations between the two bullets cannot be distinguished. This distance depends upon the resolution limit imposed by the microscope as well as by the visual acuity of the examiner. A calculation of the probabilities for finding pairs and triplets of consecutively matching lines on nonmatching bullets, by an examiner with normal perception using a microscope at 40× magnification, produces values that agree well with the empirical probabilities determined by Biasotti in the 1950s and when determined for larger consecutive sequences suggest that they are extremely unlikely to occur. The formulae can be used to determine the probabilities for the random occurrence of any sequence of striae and provide a straightforward way to quantitatively justify the significance of a specific match between any two bullets.     

A kinematic study of a human mannequin in a simulation of head-on vehicular collisions]

A method of modelling head-on car collisions at the catapult MTS 858.05 was developed. Mechanism of human body movement was determined and traces of contact interaction on clothes and car interior parts were detected.     

Inconsistency in 9 mm bullets measured with non-destructive X-ray computed tomography

Fundamental to any ballistic armour standard is the reference projectile that is to be defeated. Typically, for certification, consistency of bullets is assumed. Therefore, practical variations in bullet jacket dimensions can have far reaching consequences. Traditionally, internal dimensions could only be analysed by cutting bullets which rules out any subsequent ballistic assessment. Therefore, the use of a non-destructive X-ray computed tomography (CT) method is explored in this paper. A set of 10 bullets (9 mm DM11) was taken for analysing both intra and inter bullet jacket thickness variation. CT measurements of jacket thickness were validated with high resolution scanning electron microscope (SEM) images. An image based analysis methodology has been developed to extract the jacket thickness map and the centre of gravity. Thickness variations of the order of 200 μm were found commonly across all the bullets along the length and an angular variation of up to 100 μm was found in a few bullets. Jacket thickness and centre of gravity were also calculated for the same bullets after impact and the variations between the pre- and post-impacted bullets were compared, by establishing a common physical reference. The results show that the proposed CT scanning approach and subsequent image analysis method can bring out the statistical variations in bullet geometry pre- and post impact effectively.     

Ricochet Behavior on Glass—Critical Ricochet Angles,Ricochet Angles,and Deflection Angles

For shooting scene reconstruction purposes, knowledge about the ricochet behavior of bullets provides valuable information. In this study, the critical ricochet angles of four cartridge types were established on plain float glass. The estimates of the critical ricochet angles varied between cartridge types and were 21.0° for .32 Auto FMJ bullets, 15.8° for 9 mm Luger FMJ bullets, 17.6° for .45 Auto FMJ bullets, and 21.3° for 9 mm Luger, Action NP bullets. The corresponding ricochet and deflection angles per incidence angle varied depending on the state of the ricocheted bullets. The mean ricochet angles are always lower than the corresponding angles of incidence, and the mean ricochet angles for the FMJ bullets with undamaged jackets are lower than those of bullets where the jacket is either damaged or the bullet partially ricocheted and partially perforated. Mean ricochet angles are lower for undamaged FMJ bullets than for undamaged Action NP bullets.     

A metallurgical review of the interpretation of bullet lead compositional analysis

Comparison of the minor and trace element compositions of bullet lead alloys has been used by some forensic examiners to make definitive positive associations between bullets or lead fragments at a crime scene and samples of bullets linked to a suspect(s). Such conclusions have been based on the elemental analysis of isolated groups of bullets with no consideration of the metallurgical processes involved in the production and refining of the bullet lead alloys. An understanding of the metallurgy of lead refining reveals that the elements quantified in the forensic analysis are carefully controlled in the refining process and that there are logical reasons why some elements are more discriminatory than others. Data for lead alloys supplied to two major ammunition manufacturers confirm that multiple indistinguishable shipments of lead alloys from secondary lead refiners to the ammunition manufacturers are made each year and over a period of many years. The data also demonstrate that distinguishable compositions can come from the same melt or "source" of lead alloy. These results clearly indicate that bullets with indistinguishable compositions could have come from different lead "sources" produced in the same or different years. Furthermore, the observation that two bullets have a distinguishable composition does not necessarily mean that they came from a different "source".Our results show that the forensic examiner using a method of bullet lead alloy elemental analysis, which quantifies up to six elements is restricted to concluding only that indistinguishable bullets might have come from the same "source," not that they did come from the same "source". In addition, it is quite possible that multiple bullets with similar but distinguishable compositions could have come from the same "source". The authors therefore feel that there is no scientific validity to any conclusions more positive than attributing the possible association as to molten source among bullets from different samples. An understanding of the metallurgical principles operative in the melting/casting process as well as the data acquired for this study, indicate that any forensic conclusions which associate unknown bullets with the "same source", and/or "same box" should fail most or all Daubert criteria.     

The application of lead isotope analysis to bullet individualization in two homicides.

Bullets were characterized by lead isotope ratio analysis and trace element analysis in two homicides. In one case, we concluded that a fatal bullet did not share a common origin with bullets in a box of ammunition containing 24 cartridges taken from suspects. Evidence in the second case included two bullets from the crime scene and 163 bullets taken from various suspects. We were able to infer that the two bullets from the crime scene did not share a common origin and that they differed from all of the bullets taken from suspects. All of the suspects' ammunition had been reloaded as was evident both from trace and isotopic analysis and, indeed, from visual inspection.     

Forensic significance of bullet lead compositions

The concentrations of seven elements in projectile lead specimens received as evidence were used to assess the frequency of the occurrence of two unrelated samples having indistinguishable compositions. A set of data from 1837 samples was selected for this study from a sampling of 23,054 lead bullets and shot pellets received as evidence in the FBI Laboratory over the period 1989 through 2002. The method used for selection of samples from case submissions ensured that no two samples of the same general type from the same case were included and that no bias was introduced concerning representation of manufacturers or production sources. A total of 1,686,366 pairwise lead sample comparisons were made using the concentrations of the elements Sb, Cu, As, Ag, Bi, Sn, and Cd using a match criterion of two times the sum of the standard deviations of the paired samples. Of the 1837 samples, 1397 samples, or 76%, are distinguishable from every other sample in this study. The total number of indistinguishable sample pairs is 674, for a frequency of 1 out of every 2502 comparisons. The frequency of occurrence of matching samples decreases as the number of measured elements is increased and as the precision of the measurements improves. For bullets in which all seven elements were determined, the match frequency is 1 in 7284. Compositional comparison of bullet lead provides a reliable, highly significant point of evidentiary comparison of potential sources of crime-related bullets.     

The effect of the THV bullet in animal tissue

The Très Haute Vitesse (THV) bullet was introduced to meet the requirements of law enforcement officers, as an alternative to larger calibre fully jacketed bullets, since expanding or exploding bullets are not relevant in Europe. To examine the effect of the THV bullet in tissue, especially the size of the lesion and the degree of overpenetration, 11 recently killed pigs were shot with the weapons used by the Danish Police Force and a 9-mm pistol for reference. The ammunition was THV in the calibres 7.65 mm, 0.38, and 9 mm, using conventional fully jacketed bullets for comparison. The lesions were considerably larger when the THV bullet was used, the entry wound in particular, being roughly twice the diameter in the case of the THV bullet as compared to the fully jacketed bullet of similar calibre. Only one 7.65-mm THV bullet overpenetrated the target when fired against the thorax or abdomen of the pigs and then with only minimal residual energy. All fully jacketed 7.65-mm bullets, all 0.38 bullets, with the exception of one THV bullet, and all 9-mm bullets overpenetrated the target. The 7.65-mm THV bullet produced a lesion which in its extent resembled that of the fully jacketed 9-mm bullet, and should be a suitable alternative for the Danish Police Force.     

Performance Evaluation of a Registered Ballistic Database Using the Evofinder® System

Firearms for police in China are registered along with their fired bullets and cartridge cases. A Registered Ballistic Database (RBD) of 1000 Norinco QSZ‐92 pistols with registered ammunition was established and was evaluated through the Evofinder® system. In this research, 1000 bullets and 1000 cartridge cases were randomly selected and correlated against an RBD of 2996 bullets and 2999 cartridge cases. Examiners found that successful identifications all ranked 1st, supported with land (100%), groove (97%) engraved areas, and primary marks (85.6%) for bullets, and firing pin impressions (99.8%), and breech face marks (99.9%) for cartridge cases. Two known matches (KM) for the same pistol rank in the top two (100%). The distribution of similarity scores varies from marks; however, the Evofinder® system could still effectively distinguish known matches from known nonmatches (KNM) for either bullets or cartridge cases. This study demonstrates the efficiency of the RBD.     

Differentiation of bullets by spark source mass spectrometry.

A study has been made to demonstrate the capability of spark source mass spectrometry (SSMS) for differentiating bullets on the basis of elemental composition. Twenty-six elements are commonly found in bullet lead at the 0.1-ppm level and above. Only twelve of these prove to be generally useful for quantitative characterization. The precision of analysis with SSMS using photographic detection is about 10% relative standard deviation. The accuracy obtained in this study is considerably worse than this, about 30% average error. In spite of such large errors, SSMS is shown to be far superior to the more precise method of neutron activation analysis. The reason, of course, is the large number of elements determined by SSMS. Bullets do not have uniform elemental compositions within a box or lot. Instead, there are usually two or three distinct groups of bullets within a given box. Three Winchester boxes representing lots manufactured a few weeks apart showed common groups among them. All other boxes had unique groups of bullets, indicating that the method is a promising alternative to the conventional method of identifying bullets by physical markings.     

Injury potential of soft-air pistols

Report on a case in which an 8-year-old girl was injured on the left anterior thoracic wall by two shots fired by her 14-year-old cousin from a soft-air pistol (replica of mod. 17 make Glock, cal. 6 mm, solid plastic bullets); the projectiles caused two skin lesions, both reaching into the subcutis. The results of our own shooting tests with 2 different soft-air pistols and the injuries seen in our case confirm that soft-air pistols may cause penetrating soft-tissue injuries when fired from a short distance.     

The systemic error in the vertical component of handgun bullet trajectory reconstructions

Establishing the path or trajectory of a fired bullet is an often recurring part of shooting incident reconstruction. The current study describes how gravitational pull causes a systemic error on the vertical component of a trajectory reconstruction. Bullet drop, drop angle, and vertical offset are explained and calculated for 10 different handgun/ammunition combinations over a range of distances up to 100 m. The presented results are intended to provide forensic firearm examiners with a reference frame for the magnitude of error introduced on handgun bullet trajectory reconstructions over distance. Threshold values of 20 and 30 m are proposed as conservative distances up to where bullet trajectories can be modeled as straight lines with subsonic/transonic handgun bullets and with supersonic handgun bullets respectively. Both the bullet drop and vertical offset will be below 5 cm at these distances for those categories. The drop angle will be below 0.3°.     

The effects of certain intermediary target materials and their proximity to ballistic gelatin on jacketed hollow point bullet expansion

Expanding bullets are preferred by law enforcement because of their wounding potential and ability to avoid over-penetration which could result in unintended targets being struck by bullets that perforate their intended targets. Expansion failure for jacketed hollow point (JHP) bullets is commonly attributed to several causes including damage to the bullet's cavity, velocity loss, bullet destabilization and materials from intermediate targets filling the bullet's cavity which can cause expansion failure when the bullet subsequently impacts a soft, fluid-based target such as human tissue or ballistic gelatin. In this study, JHP bullets were fired into ballistic gelatin after passing through selected intermediate targets representing items common to shooting incidents. Velocity loss and bullet destabilization were not factors that contributed to the JHP bullets that experienced expansion failure; however, materials obstructing the bullets' cavities and damage to the bullets' cavities were considered causes for some of the JHP bullet expansion failures. It was determined through this research that most of the target materials caused JHP bullet expansion failure when shored against the ballistic gelatin, but when placed at distances of 7 ft. from the ballistic gelatin, bullets fired through the same target materials did expand. This original and unique study produced findings that are of significant value to shooting incident reconstruction experts and other forensic professionals as shooting incidents can call into question a victim's proximity to a wall or door when a bullet(s) perforated such a target material.