SEM and Stereomicroscopic Analysis of Cut Marks in Fresh and Burned Bone

This study documents the prevalence of cut mark characteristics in fresh and burned domestic pig ribs. Stab wounds from single edge serrated and smooth‐edged knives were inflicted in the vertebral and sternal regions of each fresh rib. Each rack of ribs was then divided into vertebral and sternal units. Vertebral units were defleshed and their associated cut marks were examined using a stereomicroscope. Sternal units were burned in an outdoor fire pit and examined with the addition of a scanning electron microscope (SEM). Linear cuts, V‐shaped cross‐sections, mounding, hinge fractures, and wastage were all observed on burned ribs. There was an overall decrease in the prevalence of all features (up to a 40% decrease), regardless of knife type, in burned ribs. Striations within cut marks were not observed in either fresh or burned ribs. Oblique faulting and bone lifts could only be observed using the SEM. Mounding and wastage were obliterated during the burning process. Therefore, cut marks in burned bone should ideally be examined for their characteristics utilizing an SEM.     

A method for studying knife tool marks on bone

The characteristics of knife tool marks retained on hard tissues can be used to outline the shape and angle of a knife. The purpose of this study was to describe such marks on bone tissues that had been chopped with knives. A chopping stage with a gravity accelerator and a fixed bone platform was designed to reconstruct the chopping action. A digital microscope was also used to measure the knife angle (θ) and retained V-shape tool mark angle (ψ) in a pig skull. The κ value (elasticity coefficient; θ/ψ) was derived and recorded after the knife angle (θ) and the accompanied velocity were compared with the proportional impulsive force of the knife and ψ on the bone. The constant impulsive force revealed a correlation between the V-shape tool mark angle (ψ) and the elasticity coefficient (κ). These results describe the tool marks--crucial in the medicolegal investigation--of a knife on hard tissues.     

应用SME/EDX和ICP-AES检测元素成份判定致伤工具

目的应用扫描电镜／能谱联合分析仪(Scanning electron microscopy&Energy dispersive X-ray apparatus SEM／EDX)和电感耦合原子发射等离子光谱(inductively coupled plasma-atom emission spectrometer ICP-AES)对金属致伤工具本身及所致创口残留物元素成分分析，探讨两者在推断认定此类工具的应用条件及价值。方法镀层和普通铁质工具在乳猪皮肤各致创5例，SEM／EDX对创口内遗留金属颗粒元素检测；用标准样品检测实验方法的精确度；普通铁质工具于刀背、刀刃处各取5个样本，ICP-AES测定元素成分与含量。结果镀锌工具所致创口中存在单一含有锌的金属颗粒，镀黄铜工具则同时含有锌和铜，未发现其它元素；不锈钢或普通铁质菜刀创口中，发现同时含有铁、铬、硅或铁、锰、硅的颗粒；除5号菜刀外同一把铁质菜刀在刀刃、刀背处元素含量无明显差别；ICP-AES分析表明不锈钢菜刀之间在铬、锰、硅、铜、钼和5号刀背部以及其他铁质菜刀在锰、硅元素含量差别具有显著意义，5号刀刃部锰、硅、钼、钛、磷、硫、镍元素RSD明显升高。结论SEM／EDX可以通过创口的检测对金属致伤工具进行种类的推断认定，ICP-AES则可在同种类致伤工具中进行相对同一的判定有应用价值。     

Dehydration-Induced alterations to sharp force trauma on Sus domesticus radii

Dehydration is a taphonomic process that affects nearly all skeletal remains, yet there is a dearth of evidence on this process within the forensic taphonomy literature. When considering the forensic implications of skeletal dehydration, a particular area of concern is sharp force trauma due to its global prominence in forensic cases. In an attempt to address these literature gaps and quantify the effects that dehydration has on skeletal elements, a controlled experiment subjected Sus domesticus (i.e., domestic pig) radii samples (n = 36) to laboratory-induced dehydration after they were inflicted with knife trauma. All samples were photographed pre- and post-dehydration; bone section and kerf mark length, width, and area were then measured from these photographs using ImageJ. Statistical analysis of pre- and post-dehydration samples showed that all measurements experienced significant (p ≤ 0.001) shrinkage, with bone sample area shrinking an average of 8.8 % and kerf mark area an average of 29.7 %. Alterations in length, width and area between the kerf marks and bone samples showed a weak, moderate, and strong correlation, respectively. These findings suggest that anthropological analysis may be affected by dehydration-induced shrinkage, highlighting the necessity of continued research into the effects of dehydration on skeletal trauma.     

应用SEM/EDX和ICP-AES检测元素成份判定致伤工具

目的应用扫描电镜/能谱联合分析仪(Scanning electron microscopy & Energy dispersive X-ray apparatus SEM/EDX)和电感耦合原子发射等离子光谱(inductively coupled plasma-atom emission spectrometer ICP-AES)对金属致伤工具本身及所致创口残留物元素成分分析,探讨两者在推断认定此类工具的应用条件及价值.方法镀层和普通铁质工具在乳猪皮肤各致创5例,SEM/EDX对创口内遗留金属颗粒元素检测;用标准样品检测实验方法的精确度;普通铁质工具于刀背、刀刃处各取5个样本,ICP-AES测定元素成分与含量.结果镀锌工具所致创口中存在单一含有锌的金属颗粒,镀黄铜工具则同时含有锌和铜,未发现其它元素;不锈钢或普通铁质菜刀创口中,发现同时含有铁、铬、硅或铁、锰、硅的颗粒;除5号菜刀外同一把铁质菜刀在刀刃、刀背处元素含量无明显差别;ICP-AES分析表明不锈钢菜刀之间在铬、锰、硅、铜、钼和5号刀背部以及其他铁质菜刀在锰、硅元素含量差别具有显著意义,5号刀刃部锰、硅、钼、钛、磷、硫、镍元素RSD明显升高.结论SEM/EDX可以通过创口的检测对金属致伤工具进行种类的推断认定,ICP-AES则可在同种类致伤工具中进行相对同一的判定有应用价值.     

Assessment of Maceration Techniques Used to Remove Soft Tissue from Bone in Cut Mark Analysis

Maceration techniques employed in forensics must be effective without compromising the bone's integrity and morphology, and prevent destruction of evidence. Techniques must also be fast, safe, easily obtainable and inexpensive; not all techniques currently employed are appropriate for forensic use. To evaluate the most suitable approach, seven techniques including current and new methodologies were applied to fresh, fleshed porcine ribs exhibiting cut marks. A sample size of 30 specimens per technique was examined under scanning electron microscopy at the cut mark and the surrounding uncompromised regions; a scoring system of effectiveness was applied. The previously unpublished microwave method fared best for bone and cut mark preservation. Sodium hypochlorite destroyed cut marks, and was deemed unsuitable for forensic analysis. No single technique fulfilled all criteria; however, this study provides a benchmark for forensic anthropologists to select the most appropriate method for their situation, while maintaining the high standards required by forensic science.     

Validation of tool mark analysis of cut costal cartilage

This study was designed to establish the potential error rate associated with the generally accepted method of tool mark analysis of cut marks in costal cartilage. Three knives with different blade types were used to make experimental cut marks in costal cartilage of pigs. Each cut surface was cast, and each cast was examined by three analysts working independently. The presence of striations, regularity of striations, and presence of a primary and secondary striation pattern were recorded for each cast. The distance between each striation was measured. The results showed that striations were not consistently impressed on the cut surface by the blade's cutting edge. Also, blade type classification by the presence or absence of striations led to a 65% misclassification rate. Use of the classification tree and cross-validation methods and inclusion of the mean interstriation distance decreased the error rate to c. 50%.     

Identify the injury implements by SEM/EDX and ICP-AES

The forensic investigator is frequently confronted with the discrimination and deduction of injury implements, which is one of the most important physical testimonies in courts. The usual method used in actual cases is from points of morphology. In the forensic discrimination of injury implements, such as metal implements, the analysis and comparison of elements are expected to provide excellent results, and simultaneous multi-elemental analysis is required to analyze various kinds of elements. This study was designed to establish discrimination and deduction of metal injury implements by scanning electron microscope/energy disperse X-ray microanalyzer (SEM/EDX) and inductively coupled plasma atomic emission spectrometry (ICP-AES). Examined metal particles in five wounds made on the skin of domestic pigs, respectively, using Cu-Zn or Cr-Ni coated and carbon steel kitchen implements by EDX. For carbon steel kitchen implements, analyzed five samples from the back and blade separately in the contents and varieties of elements by ICP-AES. In the wounds by the coated implements, the special particles only containing Cu, Zn or Cr, Ni were found. In the wounds by carbon steel kitchen implements, the particles containing Fe, Cr, Si or Fe, Mn, Si were found. The differences of contents of elements between the back and blade was no significant except No. 5 for carbon steel kitchen implements, and the significant differences of elements exited in Cr, Mn, Si, Cu, Mo among the stainless kitchen knives, Mn, Si among the other kitchen implements and for the blade of No. 5 knife, relative standard deviations (R.S.D.s) were significantly different in Mn, Si, Mo, Ti, S, P, Ni. Using EDX to examine the particles in wounds can deduce the categories of metal injury implements, and we can still deduce the different implements in the same category by ICP-AES.     

6种现场常见断线钳加工特征的研究

目的研究不同品牌断线钳加工特征的差异性及痕迹反映与加工特征之间的关系。方法以6种现场常见断线钳为研究对象,首先观测断线钳的刃顶厚度、刃片咬合间隙、刃侧铣纹宽度和铣纹间距等参数,然后观测剪切断头痕迹的立顶高度、立顶厚度、刃侧铣纹印痕宽度和铣纹印痕间距等参数,并用SPSS统计软件进行处理。结果 6种品牌的断线钳加工特征存在差异,断头痕迹可以稳定地反映该差异。结论可利用断头痕迹特征推断断线钳种类。     

Adjunctive use of scanning electron microscopy in bite mark analysis: a three-dimensional study

An examination of a case in which adjunctive use of scanning electron microscopy (SEM) demonstrated the presence of unusual three-dimensional characteristics in a bite mark. Despite the fact that many bite marks do not show "depth," demonstration of the presence of this third dimension can produce significant data for evidentiary purposes. In some instances, these data may transform what seem to be class characteristics of a bite mark into individual characteristics and thus impart much more uniqueness to the evidence. Because of the high level of resolution and magnification of SEM, some three-dimensional characteristics not visible to the eye can be shown quite clearly by its use. Emphasis will be given to the value of SEM as a tool of the forensic odontologist in bite mark analysis.     

电流斑的光镜和扫描电镜观察以及能谱测定

为了找出电流斑在扫描电镜下的特征性改变,作者用扫描电镜和能谱测定,配合光镜观察,对电击死者的22个皮肤电流斑和尸体上造成的18个皮肤电流斑和金属灼伤,进行了对比观察。结果表明,光镜下电流斑的形态改变与过去学者所述基本一致。非典型的电流斑难与热灼伤相鉴别。扫描电镜下电流斑的形态特征为:(1)损伤底部和壁上可见散在的小孔穴,直径为30～100μm,深浅不一,边缘不规则;(2)损伤组织表面大量细胞碎屑和颗粒;(3)组织和脱落细胞表面有裂纹;(4)损伤区内有散在的异物颗粒沉积,其形态为球形、方形或不规则形,电子密度较大。作者认为这些改变是电流作用造成,热灼伤不具备这些改变,故在扫描电镜下极易区别电流斑和热灼伤。所有电流斑均可测出与导体化学组成相同的金属元素。作者提出,扫描电镜下的上述形态改变和能谱测定结果可以作为诊断电流斑的依据。     

Feasibility of Contactless 3D Optical Measurement for the Analysis of Bone and Soft Tissue Lesions: New Technologies and Perspectives in Forensic Sciences

Abstract:  In forensic pathology and anthropology, a correct analysis of lesions on soft tissues and bones is of the utmost importance, in order to verify the cause and manner of death. Photographs, videos, and photogrammetry may be an optimal manner of immortalizing a lesion, both on cadavers and skeletal remains; however, none of these can supply a detailed three-dimensional (3D) modeling of the lesion. Up to now, only the use of casts has given us the possibility of studying deep lesions such as saw marks with an accurate and complete 3D reconstruction of bone structure. The present study aims at verifying the applicability of 3D optical contactless measurement for the accurate recording of soft tissue and bone lesions, in order to develop a unique and precise method of registering and analyzing lesions, both in forensic pathology and anthropology. Three cases were analyzed: the first, a car accident with blunt force skin injuries; the second, a murder with blunt force injury to the head applied with a metal rod; the third, a series of sharp force knife and saw lesions on bone. Results confirm that 3D optical digitizing technology is a crucial tool in the immortalization of wound morphology in the medico-legal context even on "difficult" substrates such as cut marks and saw marks on bone.     

大鼠索沟生活反应的免疫组化研究

在４０只Ｗｉｓｔａｔ大鼠颈部制成５分钟至１小时生前索沟损伤模型、应用免疫组化技术（ＳＡＢＣ），观察不同损伤时间索沟常规石蜡切片上纤维连结蛋白（Ｆｎ）和纤维蛋白原（Ｆｂ）的阳性着色和分布情况。结果发现，生前索沟损伤５分钟即能在索沟部真皮组织内发现Ｆｎ和Ｆｂ阳性反应，随着损伤时间的延长，阳性反应加深。Ｆｎ和Ｆｂ最强的着色是带状显于索沟表面表皮剥脱处，除个别死后索沟真皮内有Ｆｂ的弱阳性着色外所有对照组均未见阳性反应。结果表明Ｆｎ和Ｆｂ可以作为生前和死后索沟的鉴别指标。     

A forensic classification of distortion in human bite marks

The occurrence of distortion in human bite marks is well recognised. A forensic classification of distortion is suggested which is based upon the causative factors and their inter-relationships. The terms primary distortion and secondary distortion are introduced and described. The objective of this classification is to emphasise the need for a scientific approach to the recognition and interpretation of the types of distortion found in human bite marks. The relationships between distortion, distinctive features and superimposition techniques in bite mark analysis are discussed.     

Examination of spur marks found on inkjet-printed documents

In this paper, we propose the examination of spur mark evidence on inkjet-printed documents. Spur marks are tool marks created by the spur gears in the paper conveyance system of many inkjet printers. The relationship between printouts and printers were investigated by comparing the spur marks found on printed documents with reference spur marks sampled from known printers. The comparison was based on two characteristics of spur marks: pitch and mutual distance. These characteristics extracted the geometric features of spur marks and provided information on the type of spur gears and their location in the paper conveyance system. The spur marks on a printout matched the reference spur marks within three percent of the measured values. Spur marks were considered to be effective class characteristics to identify certain brands of inkjet printers since spur gears are used in many types of these machines.     

Preparation of Tool Mark Standards with Jewelry Modeling Waxes

Abstract:  This paper presents how jewelry modeling waxes are used in the preparation of tool mark standards from exemplar tools. We have previously found that jewelry modeling waxes are ideal for preparing test tool marks from exemplar tools. In this study, simple methods and techniques are offered for the replication of accurate, highly detailed tool mark standards with jewelry modeling waxes. The techniques described here demonstrate the conditioning and proper use of jewelry modeling wax in the production of tool mark standards. The application of each test tool's working surface to a piece of the appropriate wax in a manner consistent with the tool's design is clearly illustrated. The resulting tool mark standards are exact, highly detailed, 1:1, negative impressions of the exemplar tool's working surface. These wax models have a long shelf life and are suitable for use in microscopic examination comparison of questioned and known tool marks.     

骨砍创金属颗粒的检测

目的 应用扫描电镜/X射线能谱仪(SEM/EDX)对菜刀砍击骨质后遗留在创面上的金属微粒进行检测.方法 3种不同材质菜刀各取5把,对猪大腿骨进行砍击,使用SEM/EDX对骨创面上附着的金属颗粒元素以及菜刀自身所含元素进行定性及定量检验,并对结果进行比对分析.结果 菜刀样本同型号之间元素重量百分比相比较,结果无统计学差异(P＞0.05);创面附着金属颗粒与菜刀自身所含元素种类特征相同;其所占重量的百分比一致(P＞0.05);结论 骨骼创面遗留金属颗粒的元素种类及其百分比含量,可以作为区分菜刀类致伤工具的重要依据.     

Validation of Tool Mark Comparisons Obtained Using a Quantitative,Comparative, Statistical Algorithm

Abstract: A statistical analysis and computational algorithm for comparing pairs of tool marks via profilometry data is described. Empirical validation of the method is established through experiments based on tool marks made at selected fixed angles from 50 sequentially manufactured screwdriver tips. Results obtained from three different comparison scenarios are presented and are in agreement with experiential knowledge possessed by practicing examiners. Further comparisons between scores produced by the algorithm and visual assessments of the same tool mark pairs by professional tool mark examiners in a blind study in general show good agreement between the algorithm and human experts. In specific instances where the algorithm had difficulty in assessing a particular comparison pair, results obtained during the collaborative study with professional examiners suggest ways in which algorithm performance may be improved. It is concluded that the addition of contextual information when inputting data into the algorithm should result in better performance.     

Forensic microradiology: micro-computed tomography (Micro-CT) and analysis of patterned injuries inside of bone

When a knife is stabbed in bone, it leaves an impression in the bone. The characteristics (shape, size, etc.) may indicate the type of tool used to produce the patterned injury in bone. Until now it has been impossible in forensic sciences to document such damage precisely and non-destructively. Micro-computed tomography (Micro-CT) offers an opportunity to analyze patterned injuries of tool marks made in bone. Using high-resolution Micro-CT and computer software, detailed analysis of three-dimensional (3D) architecture has recently become feasible and allows microstructural 3D bone information to be collected. With adequate viewing software, data from 2D slice of an arbitrary plane can be extracted from 3D datasets. Using such software as a "digital virtual knife," the examiner can interactively section and analyze the 3D sample. Analysis of the bone injury revealed that Micro-CT provides an opportunity to correlate a bone injury to an injury-causing instrument. Even broken knife tips can be graphically and non-destructively assigned to a suspect weapon.     

Interpreting the Effects of Burning on Pre-incineration Saw Marks in Bone

This study examined the effects of fire on the features associated with saw marks in bone. Both class and individual characteristics were examined using stereomicroscopy and scanning electron microscopy (SEM). Twenty-four semifleshed Sus scrofa L. tibiae were sawed into three sections with the middle section having deep and shallow false starts. Twelve saw blades of varying age and type were each used to cut two tibiae. In each case, the first tibia was burned in an outdoor open fire to the point of partial calcination. The second tibia, our control, was macerated using a heated enzyme solution. Controls and burned specimens were examined for the following characteristics: breakaway spur, tooth hop, false start, exit chipping, tooth imprint, breakaway notch, pull out striae, kerf flare, and blade drift. In general, there was parity in the observed characteristics in the burned samples using the SEM and the stereomicroscope. SEM observation, however, provided enhanced images, with the addition of observing individual tooth imprints, previously not visible. Therefore, this study recommends using an SEM for the examination of saw cuts in burnt bone.