Lifting techniques for finger marks on human skin previous enhancement by Swedish Black powder — A preliminary study

An examination was done to investigate whether certain lifting techniques can lift recovered latent fingerprints on human skin surfaces of living subjects. For recovery Swedish Soot powder mixture (Swedish Black) was used.Donors intentionally placed fingerprints on the skin surface of living subjects. Finger marks were then in all cases recovered with Swedish Black powder. The procedure was repeated after 1 h and 4 h. Treated finger marks were secured and preserved as latent fingerprint evidence by different lifting processes. Having examined skin surfaces and finger marks we observed that the lifters such as white instant lifter, white fingerprint gelatin, black fingerprint gelatin, silicone, transparent adhesive tape, are suitable. Moreover, white fingerprint gelatin and white instant lifter proved to be very good at lifting treated finger marks. Black fingerprint gelatin was very good also, but finger marks were examined by slant light.     

Visualization of latent fingerprint corrosion of metallic surfaces

Abstract:  Chemical reactions between latent fingerprints and a variety of metal surfaces are investigated by heating the metal up to temperatures of ∼600°C after deposition of the fingerprint. Ionic salts present in the fingerprint residue corrode the metal surface to produce an image of the fingerprint that is both durable and resistant to cleaning of the metal. The degree of fingerprint enhancement appears independent of the elapsed time between deposition and heating but is very dependent on both the composition of the metal and the level of salt secretion by the fingerprint donor. Results are presented that show practical applications for the enhancement to fingerprints deposited in arson crime scenes, contaminated by spray painting, or deposited on brass cartridge cases prior to discharge. The corrosion of the metal surface is further exploited by the demonstration of a novel technique for fingerprint enhancement based on the electrostatic charging of the metal and then the preferential adherence of a metallic powder to the corroded part of the metal surface.     

Development of Latent Fingerprints on Thermal Paper by the Controlled Application of Heat

Apparatus to produce a spatially and temporally uniform heat source is described and this is used to visualize latent fingerprints deposited onto thermal paper by raising the temperature of the paper. Results show an improvement over previous research when fingerprint deposits are aged or the developed fingerprints faint; visualization being enhanced by the use of a blue LED light source of 465 nm peak wavelength. An investigation of the components in fingerprint sweat likely to affect the solubility and hence color change of the dye present in the thermal paper has shown that polar protic solvents able to donate a proton are favored and a polar amino acid found commonly in eccrine fingerprint sweat (lysine) has been shown able to produce the desired color change. Aged fingerprint deposits on thermal paper from a variety of sources up to 4 years old have been visualized with this technique.     

The spectroscopic detection of exogenous material in fingerprints after development with powders and recovery with adhesive lifters

The application of powders to fingerprints has long been established as an effective and reliable method for developing latent fingerprints. The powders adhere to the ridge pattern of the fingerprint only, thus allowing the image to be visualised. Fingerprints developed in situ at a crime scene routinely undergo lifting with specialist tapes to facilitate subsequent laboratory analysis. As with all recovered evidence these samples would be stored in evidence bags to allow secure transit from the scene to the laboratory and also to preserve the chain of evidence. In this paper, the application of Raman spectroscopy for the analysis of exogenous material in latent fingerprints is reported for contaminated fingerprints that had been treated with powders and also subsequently lifted with adhesive tapes. A selection of over the counter (OTC) analgesics were used as samples for the analysis and contaminated fingerprints were deposited on clean glass slides. The application of aluminium or iron based powders to contaminated fingerprints did not interfere with the Raman spectra obtained for the contaminants. In most cases background fluorescence attributed to the sebaceous content of the latent fingerprint was reduced by the application of the powder thus reducing spectral interference. Contaminated fingerprints developed with powders and then lifted with lifting tapes were also examined. The combination of these two techniques did not interfere with the successful analysis of exogenous contaminants by Raman spectroscopy. The lifting process was repeated using hinge lifters. As the hinge lifters exhibited strong Raman bands the spectroscopic analysis was more complex and an increase in the number of exposures to the detector allowed for improved clarification. Raman spectra of developed and lifted fingerprints recorded through evidence bags were obtained and it was found that the detection process was not compromised in any way. Although the application of powders did not interfere with the detection process the time taken to locate the contaminant was increased due to the physical presence of more material within the fingerprint. The presence of interfering Raman bands from lifting tapes is another potential complication. This, however, could be removed by spectral subtraction or by the choice of lifting tapes that have only weak Raman bands.     

Visualization of Latent Fingerprint Corrosion of Brass

Abstract:  Visualization of latent fingerprint deposits on metals by enhancing the fingerprint-induced corrosion is now an established technique. However, the corrosion mechanism itself is less well understood. Here, we describe the apparatus constructed to measure the spatial variation (Δ V ) in applied potential ( V ) over the surface of brass disks corroded by latent fingerprint deposits. Measurement of Δ V for potential of 1400 V has enabled visualization of fingerprint ridges and characteristics in terms of this potential difference with Δ V typically of a few volts. This visualization is consistent with the formation of a Schottky barrier at the brass-corrosion product junction. Measurement of the work function of the corroded brass of up to 4.87 ± 0.03 eV supports previous results that suggested that the corrosion product is composed of p-type copper oxides. A model for the galvanic corrosion of brass by ionic salts present in fingerprint deposits is proposed that is consistent with these experimental results.     

The Use of Liquid Latex to Recover Latent Fingerprints that are Covered in Debris from Exterior Glass Surfaces of Vehicles

The purpose of this research is to determine if latent fingerprints deposited on the exterior glass surfaces of vehicles, then covered in debris, can be recovered. Past research used liquid latex to lift soot to recover trace evidence. Recently, liquid latex has been used to recover latent fingerprints along the bottom of vehicles. In this study, a total of 216 latent fingerprints were deposited on the exterior windows of three vehicles. Three control and three experimental latent fingerprints were placed on each side window. The vehicles collected debris for either 2, 3, or 4 weeks. After debris collection, liquid latex was applied to the experimental sections. The underlying fingerprints were developed with white granular powder. Control fingerprints were developed directly with white granular powder. A chi-square test revealed a significant difference in fingerprint recovery between the control and liquid latex method (X² = 9.026, d.f. = 1, p = 0.003). An odds ratio determined that the control method increases the probability of latent fingerprint recovery by 2.68. Fisher's exact test indicated that there is no statistically significant difference between the detail of the recovered control and experimental fingerprints (p = 0.065). This study demonstrates that recovery of fingerprints is possible using the liquid latex method; however, the control method recovers more fingerprints on the glass exterior of vehicles. If latent fingerprints are thought to be present on the exterior glass surfaces of vehicles, the control method should be used to improve vehicle processing by investigators.     

A Modified Electrostatic Adsorption Apparatus for Latent Fingerprint Development on Unfired Cartridge Cases

Visualization of latent fingerprints on metallic surfaces by the method of applying electrostatic charging and adsorption is considered as a promising chemical‐free method, which has the merit of nondestruction, and is considered to be effective for some difficult situations such as aged fingerprint deposits or those exposed to environmental extremes. In fact, a portable electrostatic generator can be easily accessible in a local forensic technology laboratory, which is already widely used in the visualization of footwear impressions. In this study, a modified version of this electrostatic apparatus is proposed for latent fingerprint development and has shown great potential in visualizing fingerprints on metallic surfaces such as cartridge cases. Results indicate that this experimental arrangement can successfully develop aged latent fingerprints on metal surfaces, and we demonstrate its effectiveness compared with existing conventional fingerprint recovery methods.     

Enhancing the quality of aged latent fingerprints developed by superglue fuming: loss and replenishment of initiator

The recovery and identification of latent fingerprints from a crime scene are crucial to many investigations. The cyanoacrylate (superglue) fuming method (CFM), which develops fingerprints by growing a polymer coating over the print residue, is a powerful method but encounters severe limitations when prints are aged or exposed to harsh environmental conditions. We examine the aging process and how the changes that occur to a fingerprint residue over time influence the growth of polymer during development. We identify loss of initiator by erosion and degradation that, when coupled with a loss of water from the print residue, result in a decreased ability to polymerize ethylcyanoacrylate. Then, we present a methodology by which the ability of aged latent fingerprints to polymerize ethylcyanoacrylate is recovered. Two print enhancement agents, acetic acid and ammonia, are demonstrated to improve the growth of polymer from the print ridges by over an order of magnitude, while retaining the integrity of the print structure. Comparison between the two enhancement agents indicate that the enhancement occurs due to ridge coating by the ammonia or acetic acid and pH control of the latent print.     

Characterization of children's latent fingerprint residues by infrared microspectroscopy: forensic implications

The chemistry of children's latent fingerprint residues was investigated as a function of time and temperature by non-destructive spectrochemical analysis. Latent fingerprints from children, ranging in age from 2 to 11 years, were deposited onto aluminum-coated glass slides and were analyzed by Fourier-Transform Infrared Microspectroscopy. The results revealed that there are three major classes of compounds present in children's latent fingerprints: carboxylic acid salts, proteins, and esters. By studying the changes in the fingerprint residues as a function of time and at elevated temperatures, we discovered that the salts in the fingerprint residues are stable relative to the esters. These findings have relevant forensic implications; by targeting the acid salts instead of the esters or proteins, children's latent fingerprints may be recovered after extended periods of time have elapsed.     

The use of liquid latex as a pre-treatment to recover debris-covered latent fingerprints from exterior surfaces of vehicles

This study evaluated the effectiveness of using liquid latex as a pre-treatment for fingerprint recovery from the exterior surfaces of vehicles in summer. The sample of this study was 540 sebaceous latent fingerprints deposited on the lower body of three vehicles. Thirty control and thirty experimental fingerprints were deposited on each vehicle, and the experiment was repeated three times. The three vehicles were driven daily for either 2, 3, or 4 weeks after the deposition of fingerprints. After the vehicles reached their designated debris accumulation duration, the latent fingerprints in the control groups were developed with black fingerprint powder. Liquid latex was applied onto the fingerprints in the experimental groups, and they were subsequently developed with black fingerprint powder. A chi-sure test indicated that there was a significant difference in fingerprints recovery performance between two methods (X² = 4.903, d.f. = 1, p = 0.027). An odds ratio test indicated the control method increases the probability of fingerprint recovery by 1.54 times. A Fisher's exact test was used to evaluate the quality of fingerprints recovered from both methods and it indicated that there is no significant difference in quality using the two methods (p = 0.058). This study indicated that the traditional fingerprint powder method performed better for fingerprint recovery from exterior surfaces of vehicles in summer.     

A scanning beam time-resolved imaging system for fingerprint detection

A highly sensitive confocal scanning-beam system for time-resolved imaging of fingerprints is described. Time-resolved imaging is a relatively new forensic procedure for the detection and imaging of latent fingerprints on fluorescent substrates such as paper, cardboard, and fluorescent paint. Ordinary fluorescent imaging of latent fingerprints on these surfaces results in poor contrast. Instead, the specimens are treated with a phosphorescent dye that preferentially adheres to the fingerprint which allows time-resolved discrimination between the fingerprint phosphorescence and the background fluorescence. Time resolved images are obtained by synchronizing the digital sampling of the specimen luminescence with the on-off cycle of the chopped illumination beam. The merit of this technique is illustrated with high contrast images of fingerprints obtained from the fluorescent painted surface of a Coke can.     

LED多波段光源显现人民币上潜指印的研究

目的研究显现、提取遗留在人民币上潜在指印的方法。方法采用荧光试剂罗丹明6G对人民币进行染色处理,以LED多波段光源输出的波长为520nm的绿光照射检材,透过580nm的带通型干涉滤光镜观察指印的显现效果,并拍照提取。结果获得亮纹线暗背景的指印图像,指印纹线清晰,反差良好,特征丰富,具备良好的检验鉴定条件。结论 LED多波段光源输出的波长为520nm的绿光与罗丹明6G染色指印的吸收特性吻合,是显现、提取遗留在人民币上潜在指印的良好光源。     

Classification of firing pin impressions using HOG-SVM

Crimes, such as robbery and murder, often involve firearms. In order to assist with the investigation into the crime, firearm examiners are asked to determine whether cartridge cases found at a crime scene had been fired from a suspect's firearm. This examination is based on a comparison of the marks left on the surfaces of cartridge cases. Firing pin impressions can be one of the most commonly used of these marks. In this study, a total of nine Ruger model 10/22 semiautomatic rifles were used. Fifty cartridges were fired from each rifle. The cartridge cases were collected, and each firing pin impression was then cast and photographed using a comparison microscope. In this paper, we will describe how one may use a computer vision algorithm, the Histogram of Orientated Gradient (HOG), and a machine learning method, Support Vector Machines (SVMs), to classify images of firing pin impressions. Our method achieved a reasonably high accuracy at 93%. This can be used to associate a firearm with a cartridge case recovered from a scene. We also compared our method with other feature extraction algorithms. The comparison results showed that the HOG-SVM method had the highest performance in this classification task.     

Can latent fingerprint disclose the sex of the donor? A preliminary test study using GC–MS analysis of latent fingerprints

While fingerprints are a highly used means of identification, not every fingerprint left behind on a potential crime scene can be used for identification purposes. In some cases, the fingerprint may be smudged, partially preserved or overlapping with other prints hence distorting the ridge pattern and may therefore be not appropriate for identification. Further, fingermark residue yields a very low abundance of genetic material for DNA analysis. In such cases, the fingermark may be used to retrieve basic donor information such as sex. The focus of this paper was to assess the possibility of differentiating between the sexes of the donor of latent fingermarks. Analytical method was GC–MS analysis of the chemical compounds of latent fingermarks using 22 male and 22 female donors. Results showed 44 identified compounds. Two alcohols, octadecanol C₁₈ and eicosanol C₂₀, were found to show a difference that was statistically significant between male and female donors. There is also some evidence for the possibility of distinguishing sex of the fingermark donor based on the distribution of branched chain fatty acids, as free compounds or esterified in wax esters.     

卫生纸上汗潜手印显现方法比较研究

目的通过比较实验来探寻卫生纸上汗潜手印的最佳显现方法,为实际工作提供指导性建议。方法选择市面上常见的四种卫生纸,在每种卫生纸上制作汗潜指印实验样本,分别将茚三酮溶液浸泡法与茚二酮溶液浸泡法、茚二酮溶液浸泡法与茚二酮溶液超声雾化法、茚二酮溶液超声雾化法与(对)-二甲(替)氨基肉桂醛(DMAC)显现纸冷熏法、茚二酮溶液浸泡法与红外加热显现法、茚二酮溶液超声雾化后加热显现法与室温显现法进行两两比较,分析显现效果。结果茚二酮显现的灵敏度和质量均优于其他几种方法,特别是超声雾化后室温显现,既能很好地显现手印又不影响后期的DNA检验。结论采取茚二酮超声雾化室温条件显现方法显现卫生纸上的汗潜手印具有显现效果好、设备条件要求低、操作性强的特点,在实际案件中可以借鉴应用。     

Suicidal Shotgun Wound Employing a Shotgun Barrel,a Shotgun Shell,and a BB*

Abstract: A vast majority of firearms‐related suicides involve the conventional use of a properly functioning, intact firearm. Occasionally, forensic investigators encounter a case wherein the firearm suicide victim employs some form of unconventional use of a weapon, or utilizes an unusual weapon type. In this case report, the authors present an unusual case in which a man committed suicide by using a shotgun shell, a shotgun barrel (separate from the rest of the gun), and a BB. Some confusion as to the cause and manner of death was present during the initial scene investigation. Examination at autopsy revealed the cause of death to be a shotgun wound of the chest and prompted further scene investigation. Therefore, this case serves as another example of the importance of cooperation between scene investigators and forensic pathologists when investigating a death. A review of suicidal firearm cases using unconventional means and/or firearms is presented.     

Thermal degradation analysis of amino acids in fingerprint residue by pyrolysis GC-MS to develop new latent fingerprint developing reagents

Conventional development of latent fingerprints is compromised when the prints are decomposed by extreme temperatures, such as those encountered when a weapon cartridge is fired, an improvised explosive device is detonated, and/or in arson cases. Understanding how these extreme temperatures alter the chemical and physical properties of latent fingerprint residue could aid in the discovery of a reagent that could effectively develop these decomposed fingerprints. To mimic scenarios where fingerprints may be exposed to high heat conditions, standards of the five most abundant amino acids in fingerprint residue as well as extracted fingerprint residue were pyrolized under controlled conditions. Compounds identified as pyrolytic decomposition products were 3,6-dimethylpiperazine-2,5-dione (from alanine), maleimide, and 2,5-furandione (from aspartic acid). The pyrograms and selected ion traces show these products to hold promise as indicators of decomposed fingerprint residues and, therefore, may serve as good candidate substrates for a developing reagent.     

The Effects of High Dynamic Range on Fingerprint Images Processed by Photoshop

High dynamic range (HDR) imaging is a function that combines five images with different exposures into a single image. This technique may provide fine ridge details of fingerprint images for forensic latent fingerprint examination. Therefore, viewing fingerprints under optimal conditions is of paramount importance. This paper analyzes HDR and non‐HDR photos by using the Michelson contrast formula. The Michelson formula will provide a measurement to determine whether better contrast between the background and print can be achieved using the HDR function and if the background color affects the quality of the images. Two hypothesis were tested: (i) the HDR image provides more details of fingerprints with a better tone, greater clarity, and contrast than a normally exposed image regardless of the background color; (ii) the background color does not affect the quality of HDR fingerprint images overall, but the multi‐color background may increase the contrast of HDR fingerprint images in some cases.     

DNA recovery after sequential processing of latent fingerprints on copy paper

Forensic examiners must determine whether both latent fingerprint development and DNA profiling can be performed on the same area of an evidence item and, if only one is possible, which examination offers the best chance for identification. Latent fingerprints can be enhanced by targeting different components of fingerprint residues with sequential chemical treatments. This study investigated the effects of single-reagent and sequential latent fingerprint development processes on downstream DNA analysis to determine the point at which latent fingerprint development should be stopped to allow for DNA recovery. Latent fingerprints deposited on copy paper by one donor were developed using three sequential processes: 1,8-diazafluoren-9-one (DFO) → ninhydrin → physical developer (PD); 1,2-indanedione-zinc (IND-Zn) → ninhydrin → PD; and IND-Zn → ninhydrin → Oil Red O (ORO) → PD. Samples were examined after the addition of each chemical treatment. DNA was collected with cotton swabs, extracted, quantified, and amplified. DNA yields, peak heights, number of alleles obtained, and percentage of DNA profiles eligible for CODIS upload were examined. DNA profiles were obtained with varying degrees of success, depending on the number and type of treatments used for latent fingerprint development. The treatments that were found to be the least harmful to downstream DNA analysis were IND-Zn and IND-Zn/laser, and the most detrimental treatments were DFO, DFO/laser, and PD. In general, as the number of treatments increase, the opportunities for DNA loss or damage also increase, and it is preferable to use fewer treatments when developing latent fingerprints prior to downstream DNA processing.     

An Unusual Zip Gun Suicide—Medicolegal and Ballistic Examination

Abstract:  Home-made guns are imitations of typical firearms and usually have handgun characteristics. This article presents an unusual case of a suicide carried out by means of a fatal gunshot wound to the head using a home-made zip gun. A 49-year-old male, with a history of paranoid psychosis was found dead in the dwelling place of a family house. The investigation at the crime scene did not lead to suspicion of a gunshot wound because of the unusual nature of the firearm used. A medical examiner diagnosed an opened head injury as the primary cause of the victim's death. The autopsy findings provided immediate grounds for further inspection of the crime scene. Subsequently, a simple zip gun, which had been overlooked during the scene investigation, was discovered. An undeformed projectile recovered from the victim's head was consistent with the use of the home-made firearm. Following the completion of the investigations and autopsy, the death was classified as a suicide.