Solid-state acquisition of fingermark topology using dense columnar thin films

Various vacuum techniques are employed to develop fingermarks on evidentiary items. In this work, a vacuum was used to deposit columnar thin films (CTFs) on untreated, cyanoacrylate-fumed or dusted fingermarks on a limited selection of nonporous surfaces (microscope glass slides and evidence tape). CTF deposition was not attempted on fingermarks deposited on porous surfaces. The fingermarks were placed in a vacuum chamber with the fingermark side facing an evaporating source boat containing either chalcogenide glass or MgF(2). Thermal evaporation of chalcogenide glass or MgF(2) under a 1 μTorr vacuum for 30 min formed dense CTFs on fingermark ridges, capturing the topographical features. The results show that it is possible to capture fingermark topology using CTFs on selected untreated, vacuumed cyanoacrylate-fumed or black powder-dusted nonporous surfaces. Additionally, the results suggested this might be a mechanism to help elucidate the sequence of deposition.     

The detection and enhancement of latent fingermarks using infrared chemical imaging

The use of a new technique, Fourier transform infrared (FTIR) chemical imaging, has been demonstrated for the enhancement of latent fingermarks on a number of surfaces. Images of untreated fingermarks on glass backgrounds with excellent ridge detail were acquired using infrared chemical imaging. High quality fingermarks on glass backgrounds were also developed using ethyl cyanoacrylate (super glue) fuming and subsequent infrared chemical imaging. This new method allows the collection of images from backgrounds that traditionally pose problems for current fingermark detection methods. The background may, for example, be highly colored, have a complex pattern, or possess other pattern or image characteristics that make it difficult to separate fingermark ridges using traditional optical or luminescent visualization. One background that has proven to be a challenging surface for the development of latent fingermarks is the Australian polymer banknote. To demonstrate the power and applicability of infrared chemical imaging, fingermarks fumed with ethyl cyanoacrylate were successfully imaged from Australian polymer banknotes.     

The Development and Evaluation of Radiological Decontamination Procedures for Documents,Document Inks,and Latent Fingermarks on Porous Surfaces*†

Abstract: Criminal acts such as an attack utilizing a radiological dispersal device (RDD or dirty bomb), the manufacture of such a device, or the illicit trafficking of radioactive materials would warrant a criminal investigation. This could involve the collection, transportation, and analysis of radiologically contaminated trace evidence. But are law enforcement agencies and forensic scientists capable of dealing with this? This research investigates the decontamination efficacy of two decontamination techniques (chemical and physical) designed for the removal of radiological material from documents of forensic importance. The impact that these procedures have on the development of latent fingermarks and the forensic analysis of the inks on these documents is also studied. It was found that slight changes in the color and chemical composition of a variety of document inks and a destruction of fingermark ridges occurred after chemical decontamination. Physical decontamination had no impact on these parameters.     

The effectiveness of strong afterglow phosphor powder in the detection of fingermarks

There are numerous types of fluorescent fingermark powders or reagents used with the visualization of latent fingermarks deposited on multicolored substrate surfaces that can present a contrast problem if developed with regular fingermark powders. The developed fingermarks can show bright fluorescence upon exposure to laser, ultraviolet light and other light sources. These kinds of methods share a common concern, where surfaces and other substrates may fluoresce also. To overcome this concern, we have developed a phosphor powder which offers a strong afterglow effect which aid in the establishment of better fingermark detection. With the advent of a phosphor powder no special devices are required and the results obtained from fresh or a few days aged latent fingermarks left on: non-porous; semi-porous and also on some porous surfaces have been good. The strong afterglow effect offered by phosphor powder is also applicable for cyanoacrylate fumed fingermarks. Lift off and photography procedures of the developed fingermarks are incorporated in this paper.     

Columnar‐Thin‐Film‐Assisted Visualization of Depleted Sebaceous Fingermarks on Nonporous Metals and Hard Plastics

A fingermark on a nonporous substrate can be developed by depositing a columnar thin film (CTF) on it, but the CTF technique's sensitivity for low‐quality fingermarks is unknown. The optimized CTF and traditional development of several depletion series of sebaceous‐loaded fingermarks were compared using a split‐print methodology as well as subjective and objective grading schemes, in a limited laboratory trial. CTF development was superior to development with selected traditional techniques on brass, anodized aluminum, black acrylonitrile butadiene styrene (ABS), and white nylon. On white ABS and black nylon, the CTF technique performed poorly but still as well as the best‐performing traditional development technique. The CTF technique was more sensitive on brass and anodized aluminum than, and as sensitive on the four hard plastics and stainless steel as, the best‐performing traditional technique. Thus, the CTF technique is useful to develop friction‐ridge detail from limited fingermark residue on some smooth substrates.     

Quantitative evaluation of latent fingermarks with novel enhancement and illumination

A variety of suspended silica and metal nanoparticles have been used over the last 20 years to enhance latent fingermarks. This study quantitatively evaluates enhancement of natural and sebum-enriched fingermarks from three adult subjects acquired with a consistent applied force on glass with a fingermark press using suspended commercially available polystyrene (PS) particles. Images of the enhanced fingermarks acquired with total internal reflection (TIR), or standard overhead white light (WL), illumination are compared with fingermarks enhanced with conventional methods including cyanoacrylate fuming. The different enhancement and illumination methods are quantified based on the brightness and contrast of the fingermark images, as well as the number of minutiae that can be identified and matched to those on an inked manually acquired “template” fingermark using automatic fingerprint identification system (AFIS) software. Enhanced fingermarks acquired with the press are shown to be more consistent than manually acquired fingermarks based on these metrics. The results demonstrate that TIR illumination from a large-area illuminator built in house gives enhanced fingermark images with more matched minutiae and contrast superior to that for WL illumination for all types of enhancement. “Wet-powdering” with PS particles gives fingermark images that are for the most part comparable in terms of the number of matched minutiae to fingermarks enhanced with more conventional methods, suggesting that this novel enhancement method has a performance comparable to conventional enhancement methods. Interestingly, the age of the fingermark appears to have almost no effect on this new type of enhancement; sebum-enriched fingermarks ranging in age from 12 h to 435 days appear to have statistically identical numbers of matched minutiae.     

Fingermark detection on non-porous and semi-porous surfaces using YVO4:Er,Yb luminescent upconverting particles

This article describes the use of an anti-Stokes luminescent material (upconverter), yttrium vanadate doped with ytterbium and erbium (YVO(4):Er,Yb), for the development of latent fingermarks on a range of non-porous surfaces. Anti-Stokes luminescent materials emit light at shorter wavelengths than the excitation wavelength. This property is unusual in both natural and artificial materials commonly found as exhibits in forensic science casework. As a result, fingermark detection techniques based on anti-Stokes luminescence are potentially extremely sensitive and selective. Latent fingermarks on non-luminescent and inherently luminescent substrates, including Australian polymer banknotes (a well-known 'difficult' surface), were developed with YVO(4):Er,Yb by dry powder and wet powder techniques. The effectiveness of YVO(4):Er,Yb for fingermark detection was compared with that of cyanoacrylate fuming and of sodium yttrium tetrafluoride doped with ytterbium and erbium (NaYF(4):Er,Yb). The results illustrate some benefit of luminescent up-converting phosphors over traditional luminescence techniques for the detection of latent fingermarks.     

Enhanced Visualization of Latent Fingermarks on Rough Aluminum Surfaces Using Sequential Au and Zn/ZnS/ZnO Depositions

Detection and visualization of fingermarks on rough and diffuse surfaces is a relatively challenging task. We succeeded in developing latent fingermarks on scratched and rough aluminum surfaces by sequential deposition of a thin layer of gold followed by one of zinc or zinc‐based compounds on the fingermarks. The best image enhancement was achieved with sequential Au and ZnS depositions. Using this combination, we could enhance the visualization of latent fingermarks aged over 65 days in normal conditions. The optical reflectance from the fingermarks with the deposited layers of metal/dielectric is analyzed as a stratified medium. Significant contrast in the reflectance from the regions of the ridges and the valleys of the fingermark would enhance the visualization. Our results show that the Au and ZnS bi‐layer combination can have a large reflection contrast and improved fingermark visualization at wavelengths corresponding to the green light for specific thickness of ZnS.     

Latent fingermark development on a range of porous substrates using ninhydrin analogs--a comparison with ninhydrin and 1,8-diazofluoren

Three relatively new reagents for developing latent fingermarks on porous substrates, 1,2-indandione (IND), 5-methylthioninhydrin (5-MTN), and lawsone, are compared with the more widely used ninhydrin and 1,8-diazofluoren (DFO). Developed latent fingermark visualization on 10 different substrates comprising colored papers, cardboard, and cellophane rather than conventional printer and writing/notepad paper is assessed using latent fingermark deposits from 48 donors. Results show improved fluorescent fingermark visualization using IND compared with DFO on a range of colored cardboards and thick white paper, thus extending the range of substrates known to yield improved visualization with IND. Adding zinc chloride to IND failed to yield any further improvement in fluorescent fingermark visualization. 5-MTN (with and without zinc chloride posttreatment) showed no improvement in visualization compared with ninhydrin and DFO although visible fingermarks were developed. Lawsone produced fluorescent visible fingermarks only with white substrates, which were inferior to those produced with DFO.     

The Compatibility of Fingerprint Visualization Techniques with Immunolabeling

The chemical composition of a fingermark potentially holds a wealth of information about the fingermark donor, which can be extracted by immunolabeling. Immunolabeling can be used to detect specific components in fingermarks; however, to be applicable in the forensic field, it should be compatible with commonly used fingerprint visualization techniques. In this study, the compatibility of immunolabeling with two different fingerprint visualization techniques, magnetic powdering and ninhydrin staining, was investigated on fingermarks deposited on glass and on nitrocellulose membranes. With dermcidin as antigen of interest, immunolabeling was performed successfully on all developed fingermarks. We can conclude that immunolabeling is compatible with magnetic powdering and ninhydrin staining, which can be of great forensic value.     

The effect of corrosive substances on fingermark recovery: A pilot study

Corrosive substance attacks have become a growing issue within the UK. Although most commonly occurring in gang-related offences, there are high profile instances where this type of attack has been used to attack women to disfigure and destroy livelihoods. Despite the increase in such attacks, there has been very little published research into the recovery of forensic evidence from items used in these crimes. The effect of corrosive substances on the recovery of different types of forensic evidence is unknown, and there is no guidance for laboratories processing exhibits contaminated with corrosive substances regarding optimum treatments. This pilot study focused on establishing the effectiveness of a range of fingermark visualisation processes in recovering fingermarks on surfaces exposed to concentrated sulfuric acid (acid) and potassium hydroxide (alkali). Results indicate that on non-porous surfaces vacuum metal deposition and powder suspensions remain effective, and on porous surfaces fingermarks could still be visualised with physical developer. Alkalis were found to be more detrimental than acid environments in this limited study. The results demonstrate that fingermark recovery is still feasible on surfaces exposed to corrosive substances and provides encouragement that treatment protocols could be developed for this type of exhibit.     

Reactions of latent prints exposed to blood

We explored whether an undeveloped latent print (fingermark) exposed to blood and later developed by enhancement with blood reagents such as amido black (AB) or leucocrystal violet (LCV) could appear as a genuine blood mark. We examined three different experimental conditions. In Experiment I, fingermark residue only was tested, as a control to confirm that fingermark residue alone does not react with the blood reagents AB and LCV. Experiment II investigated whether latent fingermarks exposed to blood dilutions could be treated with AB or LCV and subsequently appear as a genuine blood mark enhanced with AB or LCV. Experiment III tested whether latent fingermarks exposed to whole blood could be processed with AB or LCV and subsequently appear as a genuine blood mark enhanced with AB or LCV.The present study found that indeed, fingermark residue alone does not react with the blood reagents AB and LCV. In Experiment II, an interaction occurred between the fingermark residue and the diluted blood that caused the ridges to appear a red color. In the present study, this interaction is called a faux blood mark. While the faux blood mark phenomenon occurred most often following exposure to diluted blood, it did not occur consistently, and a predictable pattern could not be established. However, the reaction occurred more frequently following extended fingermark residue drying times. Faux blood marks are distinguishable from genuine blood marks prior to enhancement with blood reagents. Following treatment with blood reagents, it became increasingly difficult to determine whether the enhanced mark was a genuine blood print or a latent fingermark exposed to diluted blood. Latent fingermarks exposed to whole blood often resulted in a void prior to enhancement, but following treatment with blood reagents, were difficult to distinguish from a genuine blood mark enhanced with blood reagents.     

Fingermark detection on non-porous and semi-porous surfaces using NaYF4:Er,Yb up-converter particles

This article describes the first use of an anti-Stokes material, or up-converter, for the development of latent fingermarks on a range of non-porous surfaces. Anti-Stokes materials can absorb long-wavelength light and emit light at a shorter wavelength. This property is unusual in both natural and artificial materials and so fingermark detection techniques based on anti-Stokes luminescence are potentially sensitive and selective. Latent fingermarks on luminescent and non-luminescent substrates, including Australian polymer banknotes (a well-known 'difficult' surface), were developed with sodium yttrium tetrafluoride doped with erbium and ytterbium (NaYF(4):Er,Yb) by dry powder, wet powder, and cyanoacrylate staining techniques. This study illustrates the potential of up-converter phosphors for the detection of latent fingermarks.     

Exposing latent fingermarks on problematic metal surfaces using time of flight secondary ion mass spectroscopy

Fingermarks are a key form of physical evidence for identifying persons of interest and linking them to the scene of a crime. Visualising latent (hidden) fingermarks can be difficult and the correct choice of techniques is essential to develop and preserve any fingermarks or other (e.g. DNA) evidence that might be present. Metal surfaces (stainless steel in particular) have proven to be challenging substrates from which to reliably obtain fingermarks. This is a great cause for concern among police forces around the globe as many of the firearms, knives and other metal weapons used in violent crime are potentially valuable sources of fingermark evidence. In this study, a highly sensitive and non-destructive surface science technique called time of flight secondary ion mass spectroscopy (ToF-SIMS) was used to image fingermarks on metal surfaces. This technique was compared to a conventional superglue based fuming technique that was accompanied by a series of contrast enhancing dyes (basic yellow 40 (BY40), crystal violet (CV) and sudan black (SB)) on three different metal surfaces. The conventional techniques showed little to no evidence of fingermarks being present on the metal surfaces after a few days. However, ToF-SIMS revealed fingermarks on the same and similar substrates with an exceptional level of detail. The ToF-SIMS images demonstrated clear ridge definition as well as detail about sweat pore position and shape. All structures were found to persist for over 26?days after deposition when the samples were stored under ambient conditions.     

Refining Fingermark Development using Diacetylene Copolymers on Difficult Surfaces,

In further work investigating the intriguing application of diacetylene copolymers in fingermark detection, methods were developed to control (inhibit or enhance) the diacetylene polymerization reaction in fingermarks treated with a mixture of the monomers 2,4‐hexadiyne‐1,6‐bis‐(phenylurethane) (HDDPU) and 2,4‐hexadiyne‐1,6‐bis(p‐chlorophenylurethane) (HDDCPU) in acetone solution. These methods included the use of a humidity chamber to reduce the amount of background development while promoting development on the fingermark, subjecting developed fingermarks to freezing temperatures and using a solvent to remove unreacted monomer in order to inhibit the polymerization reaction. Developed fingermarks were enhanced by conventional lighting (white light, filtered light) and fast Raman mapping, which was shown to be advantageous over FTIR imaging. This study also demonstrated the applicability of diacetylene copolymer solutions in the covert detection of fingermarks on difficult surfaces. Furthermore, fingermarks were successfully developed with good ridge detail on pig skin (used as a model for human skin, a notoriously difficult surface on which to develop fingermarks).     

Contactless Visualization of Latent Fingerprints on Nonporous Curved Surfaces of Circular Cross Section

Nondestructive techniques for gathering evidence are important in the field of forensics. Due to the geometry of the substrates, nondestructive visualization of fingermarks on curved surfaces remains challenging. A novel contactless technique was developed for visualizing and recording fingermark patterns on nonporous curved surfaces of circular cross section. The technique utilizes a plane mirror to transmit rays from a light source to illuminate the area of interest for fingermark visualization. The fingermark acquisition system consists of a digital single‐lens reflex (SLR) camera, a plane mirror, and a white light source. Mathematical equations are used to calculate the mirror size. Experiments were performed on various curved surfaces to determine the feasibility and effectiveness of the technique. Spectral Image Validation and Verification (SIVV) was used to analyze the captured images. The results of this study indicate that the technique described here is able to reveal fingermark patterns on curved surfaces of circular cross section.     

An investigation into the use of a portable cyanoacrylate fuming system (SUPERfume®) and aluminum powder for the development of latent fingermarks

Abstract: Few techniques offer “in situ” methods of friction ridge skin mark development. “In situ” development reduces mark transportation, degradation, and often cost. The effectiveness of cyanoacrylate fuming using the SUPERfume^® and dusting with aluminum powder for latent fingermark development on several nonporous surfaces, stored in various temperature environments for time periods up to 52 weeks, was investigated. Five thousand and four hundred latent fingermarks were deposited under controlled conditions and graded. The results suggested that cyanoacrylate fuming (SUPERfume^®, Foster and Freeman, U.K.) was more effective at developing latent fingermarks on textured and smooth plastic surfaces and for marks stored in temperatures of 37°C, whereas aluminum powder was more effective on glass, enameled metal paint, and varnished wood, and for storage temperatures below 20°C. There were no significant benefits to using either technique for marks older than 24 h, but it was possible to develop fingermarks following 52 weeks of storage using both techniques.     

Performance evaluation of automated fingerprint identification systems for specific conditions observed in casework using simulated fingermarks

Few studies have been reported on the performance evaluation of automated fingerprint identification systems (AFIS) for fingermark-to-fingerprint comparisons. This paper aims to illustrate to fingerprint examiners the relevance of evaluating the AFIS performance under specific conditions by carrying out five types of performance tests. The conditions addressed are the number of minutiae assigned to a fingermark, manual and automatic assignment of the minutiae, the finger region from which the fingermark originates, the degree of distortion in the fingermark, and the difference in orientation between fingermarks and fingerprints. In these tests, the magnitude of the influence for each condition was quantified. The comparisons were performed using a research AFIS technology with simulated fingermarks. Simulated fingermarks provide a practical way to create fingermarks for specific conditions in large quantities. The results showed that each condition influences the performance significantly, emphasizing the relevance of developing, and applying performance tests for specific conditions.     

Development of Latent Fingermarks from Rocks and Stones

Since the beginning of recorded history, stones have been used in the commission of crimes due to their widespread availability. Stones can be used as a lethal weapon that sometimes might be the only evidence in a serious case. The common perception, even in professional fingermark circles, is that stones do not yield identifiable latent fingermarks. The authors of this research paper examined the feasibility of developing fingermarks from seven types of stones using three latent fingermark techniques: magnetic powder, cyanoacrylate fuming, and ninhydrin. The paper will demonstrate that by classifying stones and rocks according to their natural properties (porosity, permeability, and the nature of surface area), even application of the simplest development techniques can produce good results. In conclusion, chert and limestone yielded the most qualitative and quantitative results using magnetic powder. The time factor is also important in recovering latent fingermarks on stones and rocks.     

Fixing Transient Iodine on Developed Latent Fingermarks

In the present study, a simple and novel fume–mist technique is described which can be used efficiently to fix the latent fingermarks developed using iodine. It is well known that the residues left over in the fingermarks interact with iodine to give transient brown impressions which disappear in a short time. Also, iodine forms colored complexes with various organic solvents. Based on iodine–fingermark interaction and iodine–solvent complex formation, latent fingermarks were developed on paper surface using iodine fumes which were subsequently fixed by spraying polar and nonpolar solvents. The fingermarks developed with this technique were not only clear but also permanent in nature. The interaction of fingermark residue, iodine, and solvent forming a ternary structure is believed to be a possible reason for the stability of iodine‐developed fingermarks. Ease of method, availability of chemicals, and minimum training make the method adaptable in routine development of forensic fingermarks present on paper surface.