Evaluation of alizarin and purpurin dyes for their ability to visualize latent fingermark on porous surfaces

Anthraquinones are a group of dye with many members and a wide range of industrial uses ranging from food, textiles to printing. Even though the reactions of anthraquinone dyes with amino acids are known, they have not yet been subjected to an examination regarding their ability in fingermark detection. In the presented study, the potential of alizarine and purpurin, natural anthraquinone dyes, as a fingermark reagent was examined in comparison with ninhydrin and lawsone. Alizarin and purpurin react with latent fingermark residue on copier paper and thermal paper to yield yellow-orange coloured impressions. The products formed also display photoluminescence properties when illuminated at 440 nm viewed through red filter. Both natural anthraquinone dyes exhibited some superior properties at the development of latent fingermarks on these surfaces compared to ninhydrin and lawsone.     

Thermal development of latent fingermarks on porous surfaces—Further observations and refinements

In a further study of the thermal development of fingermarks on paper and similar surfaces, it is demonstrated that direct contact heating of the substrate using coated or ceramic surfaces at temperatures in excess of 230 °C produces results superior to those obtained using hot air. Fingermarks can also be developed in this way on other cellulose-based substrates such as wood and cotton fabric, though ridge detail is difficult to obtain in the latter case. Fluorescence spectroscopy indicates that the phenomena observed during the thermal development of fingermarks can be reproduced simply by heating untreated white copy paper or filter paper, or these papers treated with solutions of sodium chloride or alanine. There is no evidence to suggest that the observed fluorescence of fingermarks heated on paper is due to a reaction of fingermark constituents on or with the paper. Instead, we maintain that the ridge contrast observed first as fluorescence, and later as brown charring, is simply an acceleration of the thermal degradation of the paper. Thermal degradation of cellulose, a major constituent of paper and wood, is known to give rise to a fluorescent product if sufficient oxygen is available [1], [2], [3], [4], [5]. However, the absence of atmospheric oxygen has only a slight effect on the thermal development of fingermarks, indicating that there is sufficient oxygen already present in paper to allow the formation of the fluorescent and charred products. In a depletion study comparing thermal development of fingermarks on paper with development using ninhydrin, the thermal technique was found to be as sensitive as ninhydrin for six out of seven donors. When thermal development was used in sequence with ninhydrin and DFO, it was found that only fingermarks that had been developed to the fluorescent stage (a few seconds of heating) could subsequently be developed with the other reagents. In the reverse sequence, no useful further development was noted for fingermarks that were treated thermally after having been developed with ninhydrin or DFO. Aged fingermarks, including marks from 1-year-old university examination papers were successfully developed using the thermal technique.     

ZnS和ZnS:Cu无机紫外荧光材料的制备及其在汗潜手印显现中的应用

目的制备荧光强度高、客体适用性广、显现效果优良且合成方法简单的ZnS及ZnS:Cu无机紫外荧光材料,并将其用于汗潜手印的显现。方法通过一步溶液反应共沉淀法制备ZnS无机紫外荧光材料,并在ZnS材料中加入Cu^2+得到ZnS:Cu以改善荧光性质,将其应用于普通客体(白色捺印纸、载玻片、铁架台、乳白色花纹瓷砖表面、磨砂化学实验台面、不锈钢表面)和复杂客体(拼色花纹瓷砖、农夫山泉塑料标签和杂志封面铜版纸)上汗潜手印的显现,并与传统荧光粉末显现效果进行对比。结果ZnS材料具有荧光性,并且在ZnS材料中掺杂Cu^2+后得到的ZnS:Cu材料荧光强度增强,荧光光谱范围变广,稳定性提升。显现汗潜手印时,适用客体范围更广,并且可通过调节激发光的波长呈现不同的显现效果。结论通过在无机荧光材料ZnS中掺杂Cu^2+可改善材料的荧光范围,从而得到适用于不同客体上汗潜手印显现且效果更好的ZnS:Cu无机紫外荧光材料。     

Enhanced Visualization of Latent Fingermarks on Rough Aluminum Surfaces Using Sequential Au and Zn/ZnS/ZnO Depositions

Detection and visualization of fingermarks on rough and diffuse surfaces is a relatively challenging task. We succeeded in developing latent fingermarks on scratched and rough aluminum surfaces by sequential deposition of a thin layer of gold followed by one of zinc or zinc‐based compounds on the fingermarks. The best image enhancement was achieved with sequential Au and ZnS depositions. Using this combination, we could enhance the visualization of latent fingermarks aged over 65 days in normal conditions. The optical reflectance from the fingermarks with the deposited layers of metal/dielectric is analyzed as a stratified medium. Significant contrast in the reflectance from the regions of the ridges and the valleys of the fingermark would enhance the visualization. Our results show that the Au and ZnS bi‐layer combination can have a large reflection contrast and improved fingermark visualization at wavelengths corresponding to the green light for specific thickness of ZnS.     

Novel O‐propyl,S‐propyl,and N‐propyl substituted 1,4‐naphthoquinones and 1,4‐anthraquinones as potential fingermark development reagents for porous surfaces

Lawsone is a 2‐substituted‐1,4‐naphthoquinone derivative, which has been proposed as an alternative to the reagents currently used for fingermark detection on porous surfaces. 2‐substituted‐anthraquinones, which contain an additional conjugated benzene ring, have a similar chemical structure to that of lawsone. In this study, a new series of 2‐substituted‐1,4‐naphthoquinones and 2‐substituted‐1,4‐anthraquinones were synthesized and completely characterized by¹H NMR,¹³C NMR, IR, and HPLC‐TOF/MS analyses. All newly synthesized 2‐substituted‐1,4‐quinones were investigated for their ability to develop latent fingermarks on porous surfaces, and this ability was compared with that of lawsone. Each fingermark developed was graded using an established method; thus, quantitative data were attributed to each fingermark. It has been demonstrated that the 1,4 ‐ quinones react with amino acids present in latent fingermarks on selected paper surfaces to produce faint yellow‐orange impressions, which exhibit strong photoluminescence when illuminated with a forensic light source at 440 nm and observed through a red filter. None of the compounds caused background darkening. The results obtained were generally similar to those of lawsone, however, 8‐dibromo‐2‐(propylamino)naphthalene‐1,4‐dione and 5,8‐dibromo‐2‐(propylthio)naphthalene‐1,4‐dione yielded better results for copier paper and colored (blue) copier paper used in this analysis. To the best of our knowledge, this is the first study to examine the role of 1,4‐anthraquinone derivatives as potential fingermark development reagents. The results indicate that 1,4‐quinones have a potential to be used as reagents for enhancement of latent fingermarks.     

An investigation into the enhancement of fingermarks in blood on paper with genipin and lawsone

The abilities of two natural products, genipin and lawsone, to enhance blood contaminated fingermarks on papers of various porosities and colour were investigated and compared to the routinely used amino acid reagents, ninhydrin and 1,8-diazafluoren-9-one (DFO).Fingermarks in blood were deposited as a split depletion series on various paper types and colours for ageing periods of 6 weeks, 4 weeks, 2 weeks and 1 week before enhancement. The developed marks were observed under different lighting conditions, recorded and graded by way of attributing quantitative data to each series.Results indicated that while genipin showed some potential as a reagent for the enhancement of latent fingermarks, it displayed no suitability for the enhancement of fingermarks in blood on paper. Lawsone also failed to successfully enhance either type of fingermark. Upon comparison of the results with those of ninhydrin and DFO it was found that ninhydrin displayed the highest success rate of development of these marks.     

The effectiveness of strong afterglow phosphor powder in the detection of fingermarks

There are numerous types of fluorescent fingermark powders or reagents used with the visualization of latent fingermarks deposited on multicolored substrate surfaces that can present a contrast problem if developed with regular fingermark powders. The developed fingermarks can show bright fluorescence upon exposure to laser, ultraviolet light and other light sources. These kinds of methods share a common concern, where surfaces and other substrates may fluoresce also. To overcome this concern, we have developed a phosphor powder which offers a strong afterglow effect which aid in the establishment of better fingermark detection. With the advent of a phosphor powder no special devices are required and the results obtained from fresh or a few days aged latent fingermarks left on: non-porous; semi-porous and also on some porous surfaces have been good. The strong afterglow effect offered by phosphor powder is also applicable for cyanoacrylate fumed fingermarks. Lift off and photography procedures of the developed fingermarks are incorporated in this paper.     

Determination of efficacy of fingermark enhancement reagents; the use of propyl chloroformate for the derivatization of fingerprint amino acids extracted from paper

The analysis of the constituents of fingerprints has been described numerous times, mainly with the purpose of determining the aging effect on fingerprints or showing the differences between donors or groups of donors. In this paper we describe the use of derivatized amino acids to determine the efficacy of the visualization reagents 1,8-diazafluoren-9-one (DFO) and ninhydrin. At present certain conditions are used for the application of these reagents, as determined by trial-and-error investigations, to the effect on fingerprints. The recovery of amino acids from a porous surface can be used as a measure for the efficacy of a visualization agent.In this paper we describe a method for the determination of the amount of amino acid left after reaction with well known fingerprint visualization reagents. This will allow a more scientific approach to method development for fingermark enhancement techniques. Furthermore, investigations on the influence of the concentration of fingermark amino acids, the order of application of and exposure time to reagents and the influence of age of the amino acids were carried out. These studies have resulted in a broader understanding of the mechanism involved in visualization of fingermarks using DFO and ninhydrin.     

Quantitative evaluation of latent fingermarks with novel enhancement and illumination

A variety of suspended silica and metal nanoparticles have been used over the last 20 years to enhance latent fingermarks. This study quantitatively evaluates enhancement of natural and sebum-enriched fingermarks from three adult subjects acquired with a consistent applied force on glass with a fingermark press using suspended commercially available polystyrene (PS) particles. Images of the enhanced fingermarks acquired with total internal reflection (TIR), or standard overhead white light (WL), illumination are compared with fingermarks enhanced with conventional methods including cyanoacrylate fuming. The different enhancement and illumination methods are quantified based on the brightness and contrast of the fingermark images, as well as the number of minutiae that can be identified and matched to those on an inked manually acquired “template” fingermark using automatic fingerprint identification system (AFIS) software. Enhanced fingermarks acquired with the press are shown to be more consistent than manually acquired fingermarks based on these metrics. The results demonstrate that TIR illumination from a large-area illuminator built in house gives enhanced fingermark images with more matched minutiae and contrast superior to that for WL illumination for all types of enhancement. “Wet-powdering” with PS particles gives fingermark images that are for the most part comparable in terms of the number of matched minutiae to fingermarks enhanced with more conventional methods, suggesting that this novel enhancement method has a performance comparable to conventional enhancement methods. Interestingly, the age of the fingermark appears to have almost no effect on this new type of enhancement; sebum-enriched fingermarks ranging in age from 12 h to 435 days appear to have statistically identical numbers of matched minutiae.     

The Compatibility of Fingerprint Visualization Techniques with Immunolabeling

The chemical composition of a fingermark potentially holds a wealth of information about the fingermark donor, which can be extracted by immunolabeling. Immunolabeling can be used to detect specific components in fingermarks; however, to be applicable in the forensic field, it should be compatible with commonly used fingerprint visualization techniques. In this study, the compatibility of immunolabeling with two different fingerprint visualization techniques, magnetic powdering and ninhydrin staining, was investigated on fingermarks deposited on glass and on nitrocellulose membranes. With dermcidin as antigen of interest, immunolabeling was performed successfully on all developed fingermarks. We can conclude that immunolabeling is compatible with magnetic powdering and ninhydrin staining, which can be of great forensic value.     

Visualization of latent fingermark corrosion of brass, climatic influence in a comparison between the U.K. and Iraq

Through a comparison of fingermark sweat corrosion of α phase brass in both the U.K. and Iraq, we show how samples from Iraq have improved fingermark corrosion over U.K. samples that require no additional enhancement prior to visualization. Over 50% of Iraqi samples produced fingermark corrosion with full ridge detail compared with 0% from the U.K. X-ray photoelectron spectroscopy analysis of the fingermark corrosion products showed that Iraqi samples exhibit more dezincification with the Zn:Cu ratio averaging 1:1.82 compared with 1:3.07 for U.K. samples. Auger spectroscopy showed the presence of both zinc oxide and copper (I) oxide. No copper (II) was observed on the surface of the corroded brass. Opportunities to exploit the optical properties of these thin film oxides to enhance the visualization of fingermark corrosion are considered, and the potential to use fingermark corrosion of metal as a means of visualizing fingerprints in war zones is discussed.     

Dual fingerprint reagents with enhanced sensitivity: 5-methoxy- and 5-methylthioninhydrin

"Dual fingerprint reagents" are chemical formulations which produce with latent fingerprints in a single step, impressions that are both colored and fluorescent. Pre-mixed solutions of the two commercially available ninhydrin analogues, 5-methoxyninhydrin (MN) and 5-methylthioninhydrin (MTN) with zinc or cadmium salts, are true dual reagents. They are much more sensitive than the parent dual reagent, ninhydrin/ZnCl(2). The main advantage of the new formulations is that they can be used at room temperature, with no need to cool the sample to liquid nitrogen temperature. At 0.05% concentration, which is 10-fold lower than the common ninhydrin working solution, MTN/ZnCl(2) is as sensitive as DFO in the fluorescence mode and considerably more sensitive in the color mode. MTN is also slightly cheaper than DFO.     

The detection and enhancement of latent fingermarks using infrared chemical imaging

The use of a new technique, Fourier transform infrared (FTIR) chemical imaging, has been demonstrated for the enhancement of latent fingermarks on a number of surfaces. Images of untreated fingermarks on glass backgrounds with excellent ridge detail were acquired using infrared chemical imaging. High quality fingermarks on glass backgrounds were also developed using ethyl cyanoacrylate (super glue) fuming and subsequent infrared chemical imaging. This new method allows the collection of images from backgrounds that traditionally pose problems for current fingermark detection methods. The background may, for example, be highly colored, have a complex pattern, or possess other pattern or image characteristics that make it difficult to separate fingermark ridges using traditional optical or luminescent visualization. One background that has proven to be a challenging surface for the development of latent fingermarks is the Australian polymer banknote. To demonstrate the power and applicability of infrared chemical imaging, fingermarks fumed with ethyl cyanoacrylate were successfully imaged from Australian polymer banknotes.     

Development of Latent Fingermarks from Rocks and Stones

Since the beginning of recorded history, stones have been used in the commission of crimes due to their widespread availability. Stones can be used as a lethal weapon that sometimes might be the only evidence in a serious case. The common perception, even in professional fingermark circles, is that stones do not yield identifiable latent fingermarks. The authors of this research paper examined the feasibility of developing fingermarks from seven types of stones using three latent fingermark techniques: magnetic powder, cyanoacrylate fuming, and ninhydrin. The paper will demonstrate that by classifying stones and rocks according to their natural properties (porosity, permeability, and the nature of surface area), even application of the simplest development techniques can produce good results. In conclusion, chert and limestone yielded the most qualitative and quantitative results using magnetic powder. The time factor is also important in recovering latent fingermarks on stones and rocks.     

Optimisation and evaluation of 1,2-indanedione for use as a fingermark reagent and its application to real samples

1,2-indanedione is an emerging fingermark reagent used on porous surfaces. The general consensus is that this reagent is at least as sensitive as DFO, with some research showing higher sensitivity for 1,2-indanedione as opposed to DFO. However, a number of discrepancies existed in the literature as to which formulation and which development procedure produces optimal results. This project set out to investigate the best formulation and development procedure under Australian conditions, encompassing all published recommendations as well as some novel approaches. 1,2-indanedione formulations were compared with respect to initial colour, fluorescence, concentration of reagent, acetic acid concentration, and the effect of different carrier solvents. Numerous development conditions were investigated, including a conventional oven, a heat press and humidity. Further enhancement using metal salt treatment and liquid nitrogen was also evaluated. The heat press set at 165 degrees C for 10s proved to give the best initial colour and most intense luminescence. Secondary metal salt treatment improved initial colour and luminescence. The Polilight, the VSC 2000, and the Condor Chemical Imaging macroscope have been used to detect the fingerprints developed with 1,2-indanedione on a variety of high- and low-quality porous and semi-porous surfaces, with impressive results overall. Laboratory and field tests were conducted to compare 1,2-indanedione with DFO and ninhydrin as well as to investigate the position of 1,2-indanedione in the sequence of reagents for fingermark detection on porous surfaces. Overall, 1,2-indanedione proved to be a viable alternative to traditional methods for the detection of fingermarks on porous surfaces, with more fingermarks being developed using this reagent on real samples than both DFO and ninhydrin and a combination of the two reagents.     

The Recovery of Latent Fingermarks from Evidence Exposed to Ionizing Radiation*

Abstract: Continual reports of illicit trafficking incidents involving radioactive materials have prompted authorities to consider the likelihood of forensic evidence being exposed to radiation. In this study, we investigated the ability to recover latent fingermark evidence from a variety of substrates that were exposed to ionizing radiation. Fingermarks deposited on common surfaces, including aluminum, glass, office paper, and plastic, were exposed to doses ranging from 1 to 1000 kGy, in an effort to simulate realistic situations where evidence is exposed to significant doses of radiation from sources used in a criminal act. The fingermarks were processed using routine fingermark detection techniques. With the exception of glass and aluminum substrates, radiolysis had a considerable effect on the quality of the developed fingermarks. The damage to ridge characteristics can, in part, be attributed to chemical interactions between the substrate and the components of the fingermark secretions that react with the detection reagents.     

Latent Fingermark Development on Thermal Paper using 1,2‐Indanedione/Zinc and Polyvinylpyrrolidone,

Polyvinylpyrrolidone (PVP) has been used in combination with 1,2‐indanedione (1,2‐IND) and ZnCl₂ (Zn) to develop latent fingermarks. The results show that the optimal ratio of 1,2‐IND/Zn:PVP is 1.0:0.4 (the concentration of PVP is 8%) for developing fingermark. The developed formulation was tested on the surfaces of 12 kinds of thermal papers. The variation in the fingermark development efficiency was observed within the same and among different kinds of thermal papers. The fingermark development efficiency was mostly better on the thermally sensitive surface compared to the thermally nonsensitive surface. However, similar or even better development was observed from a few thermally nonsensitive surfaces. The present method has shown better efficiency compared to the three other proposed methods on the thermally sensitive surface. In contrast, the present method was proven not the best for the thermally nonsensitive surface.     

Columnar‐Thin‐Film‐Assisted Visualization of Depleted Sebaceous Fingermarks on Nonporous Metals and Hard Plastics

A fingermark on a nonporous substrate can be developed by depositing a columnar thin film (CTF) on it, but the CTF technique's sensitivity for low‐quality fingermarks is unknown. The optimized CTF and traditional development of several depletion series of sebaceous‐loaded fingermarks were compared using a split‐print methodology as well as subjective and objective grading schemes, in a limited laboratory trial. CTF development was superior to development with selected traditional techniques on brass, anodized aluminum, black acrylonitrile butadiene styrene (ABS), and white nylon. On white ABS and black nylon, the CTF technique performed poorly but still as well as the best‐performing traditional development technique. The CTF technique was more sensitive on brass and anodized aluminum than, and as sensitive on the four hard plastics and stainless steel as, the best‐performing traditional technique. Thus, the CTF technique is useful to develop friction‐ridge detail from limited fingermark residue on some smooth substrates.     

Preparation of a low-cost fingerprint powder that harnesses white light to emit long-lived phosphorescence

An inexpensive, commercially available doped strontium aluminate phosphor with long-lived afterglow has been prepared and assessed in the role of a luminescent fingerprint dusting powder. Blue, green, and aqua phosphorescence persisting for ca. 30 s was obtainable from treated fingermarks after charging the powders with the white light (400–700 nm) setting of a forensic light source. Imaging the phosphorescent afterglow enabled the elimination of background emissions encountered during latent fingermark examination. This was demonstrated by visualising fingermarks on substrates that possess inbuilt fluorescent security features and highly patterned substrate backgrounds, without any need for bespoke scientific equipment.     

Evaluation of a Hot Print System for the development of latent fingermarks on thermal paper: A pseudo-operational trial

Enhancement of latent fingermarks on thermal paper poses a number of problems when using traditional methods used for porous substrates due to blackening of the thermal layer as a result of polar solvents present within the reagents and high temperatures oxidising the acid/dye complex. Thus, methods which prevent such reactions are favoured for the development of latent prints on said substrates. A comparative pseudo-operational trial using UV, Hot Print System (HPS), ninhydrin and ThermaNIN was performed on 1000 thermal paper substrates gathered from various sources. The results indicated that the most effective method was an acetone pre-wash followed by ninhydrin. The sequence of HPS-ninhydrin was similarly effective when compared to ninhydrin as a sole technique. ThermaNIN produced fewer marks than ninhydrin but was superior to HPS. Whilst the HPS developed some fingermarks, there was only a very small number of marks uniquely developed by it.