PAMAM G7.0的制备及在非渗透性表面手印显现中的应用

目的探索一种非渗透性表面手印显现的新方法。方法根据现有方法合成第七代聚酰胺-胺（PAMAM G7.0）树形分子材料,并使用荧光光谱法对产物进行荧光测试;将合成材料对多种客体表面、不同遗留时间的手印进行显现,并将显现结果与粉末法和传统的荧光染料法进行比对。结果实验表明该荧光材料在365nm光激发下可以发出较强的可见荧光;与粉末法和传统的荧光染料法相比,PAMAM G7.0可以同手印残留物进行高选择性结合,手印纹线与背景之间的反差大。结论PAMAMG7.0可以有效地显出非渗透性客体表面的手印。     

紫外激光技术显现潜在指印的研究

目的研究显现潜在指印的新技术。方法用自主研发的266nm短波紫外线输出的ND：YAG激光器作为激发光源激发渗透性客体表面的潜在指印,使指印发出荧光。结果能有效显现出亮纹线暗背景的潜在指印发光图像。结论利用该紫外激光技术可以显现纸张等渗透性客体表面的潜在指印。     

Fe_(3)O_(4)@Tb-BTC的制备及其在潜指印显现中的应用

目的以Fe_(3)O_(4)纳米颗粒为核,以Tb-BTC为壳,制备核壳结构的Fe_(3)O_(4)@Tb-BTC纳米粉末,并基于此磁性纳米材料建立粉末显现潜指印的方法。方法通过透射电镜、X射线衍射对合成的Fe_(3)O_(4)@Tb-BTC进行表征,并探究其性质。使用该材料对渗透性客体、非渗透性客体、半渗透性客体上的皮脂指印进行显现,探究了对遗留时间为1、3、5、7d的皮脂指印和连续捺印5次的皮脂指印的显现效果,并与普通磁性荧光粉末进行了对比。结果制备的Fe_(3)O_(4)@Tb-BTC纳米粉末尺寸均一、性质稳定,对多种客体上皮脂指印具有良好的显现效果,且基本不受指印遗留时间、遗留皮脂量的限制。显现后的指印在254nm紫外光激发下释放出明亮的绿色荧光,显现效果强于普通磁性荧光粉末。结论该方法可以有效显现各种客体上的皮脂指印,极大提高指印的对比度,降低背景客体的干扰,具有极高的应用前景和应用价值。     

一种新型指印荧光显现剂的研究

本文主要论述了新型指印荧光显现剂的基本原理、配方和实验结果.所配制的显现剂可显现牛皮纸、白纸、铜板纸、明信片等纸张上的指印,也可以显现塑料、油漆面、原木、乳胶漆墙面等客体表面的指印,使用方便、快捷.     

紫外光谱成像技术显现潜在油汗混合指印的初步探索

目的研究运用紫外光谱成像技术显现潜在油汗混合指印的可行性和方法。方法使用紫外光谱成像仪获取典型潜在油汗混合指印的光谱影像数据资料,比较不同数据处理软件的分析结果。结果紫外光谱成像技术具有显现潜在油汗指印的能力。结论紫外光谱成像技术能够成功显现非渗透性客体表面潜在油汗混合指印。     

远红外加热无损显现渗透性客体上指印初探

在指印显现实践中,渗透性客体上的汗液指印显现方法主要是有损显现,对此,本实验尝试建立远红外加热无损显现渗透性客体上汗液指印,介绍如下。1材料和方法1.1材料检材加温设备：HGXJ-807潜在手印无损显现系统（上海恒光警用器材有限公司）,HGXJ-447nm激光生物显现仪（上海恒光警用器材有限公司）,NIKON单反数码照相机,447nm干涉滤光镜。1.2方法（1）将HGXJ-807潜在手印无损显现系统通上电,预加热5min~6min,箱内温度设置185℃。     

纳米二氧化钛荧光粉末显现潜在手印研究

目的使用荧光染料包覆纳米二氧化钛颗粒,制备具有荧光效果的纳米二氧化钛粉末材料,并探索应用纳米二氧化钛荧光粉末显现潜在手印的方法。方法使用实验室合成的二酰亚胺染料与纳米二氧化钛微粒按照一定质量比混合制备形成荧光粉末,通过扫描电子显微镜对其进行表征,观察颗粒结构特征。在玻璃、瓷砖、透明塑料片、彩色塑料包装、易拉罐5类非渗透性客体上捺印手印,观察纳米二氧化钛荧光粉末对不同非渗透性客体上新鲜潜手印的显现效果。分别在5种客体上制作遗留时间为1、4、7、15d的手印样本,考察遗留时间对纳米二氧化钛荧光粉末显现自然陈旧手印效果的影响。将新鲜手印置于标准大气压100℃条件下分别加热1~72h,使用纳米二氧化钛荧光粉末显现,考察其对高温老化手印的显现效果。结果纳米二氧化钛荧光粉末为粒径100~200nm的圆形颗粒;在蓝绿光激发下可发出较强的荧光,能显现多种非渗透性客体上的新鲜手印,与背景反差明显并且能显著降低复杂背景对手印纹线的影响;显出新鲜手印中80%以上具有鉴定条件。纳米二氧化钛荧光粉末对遗留15d以内的陈旧手印仍具有较好的显现效果。100℃高温环境对手印显现效果没有明显影响。结论纳米二氧化钛荧光粉末经济、环保,显现操作简单,易于推广。     

陈旧纸币上潜在指印的无损显现

用常规物理或化学方法只能显现新纸币上的潜在指印或纸币上新鲜的潜在指印,而且成功率不高。对于纸币较陈旧、遗留时间较长的潜在手印显现难度较大。本文介绍一种无损的陈旧纸币上潜在指印的显现方法。如果用此法显现不成功,对客体将毫无损害,可继续使用其它方法显现。 1 原理指纹分泌物中有许多化合物在吸收可见光或近紫外光后会发生斯托克斯效应,配合一些器件即能观察到指印荧光,然后进行拍摄提取。但由于指纹分泌物含量极微,光吸收和散射效应不明显,     

暗视场照明与分色照相配合显现指印

目的研究彩色光滑客体上指印的显现方法。方法用暗视场照明和分色照相配合的方法对4种彩色木板上指印进行了显现。结果实验结果表明了暗视场照明和分色照相方法能够有效显现出彩色光滑客体上的潜在指印。结论拓宽了暗视场照明显现指印的范围,同时为彩色光滑客体上指印的显现提供了一种新的方法。     

悬浮液法显现潜在指印的研究(Ⅲ)

悬浮液法适用于潮湿客体表面上潜指印的显现。对于暗色客体表面上的指印,二硫化钼或四氧化三铁悬浮液法显出的指印为灰色或黑色,反差太小而不适用。本文提出的氧化锌(或碳酸锌)、ΦK8π-03(或硼钒酸钇铕)荧光粉悬浮液法选用的悬浮物质为白色或在紫外光照射下具有荧光,可弥补暗色客体上二硫化钼或四氧化三铁悬浮液法显现指印反差较弱的缺点。     

CdSe/TGA与CdS/PAMAM量子点溶液显现胶带粘面油汗手印性能比较研究

目的比较巯基乙酸包覆的硒化镉（CdSe/TGA）和硫化镉/聚酰胺-胺（CdS/PAMAM）量子点溶液显现胶带粘面手印的性能。方法两种材料在显现指纹的过程中,通过比较观察显现时间、显现温度、遗留时间等因素来考察显现效果。结果 CdSe/TGA溶液的荧光强度、显现时间以及材料的稳定性较好;CdS/PAMAM溶液显现的手印纹线流畅,显现细节特征能力强,对陈旧的或微弱的油潜手印的显现效果好。结论两种材料各有所长,对胶带粘面手印有良好的显现效果。     

ZnS和ZnS:Cu无机紫外荧光材料的制备及其在汗潜手印显现中的应用

目的制备荧光强度高、客体适用性广、显现效果优良且合成方法简单的ZnS及ZnS:Cu无机紫外荧光材料,并将其用于汗潜手印的显现。方法通过一步溶液反应共沉淀法制备ZnS无机紫外荧光材料,并在ZnS材料中加入Cu^2+得到ZnS:Cu以改善荧光性质,将其应用于普通客体(白色捺印纸、载玻片、铁架台、乳白色花纹瓷砖表面、磨砂化学实验台面、不锈钢表面)和复杂客体(拼色花纹瓷砖、农夫山泉塑料标签和杂志封面铜版纸)上汗潜手印的显现,并与传统荧光粉末显现效果进行对比。结果ZnS材料具有荧光性,并且在ZnS材料中掺杂Cu^2+后得到的ZnS:Cu材料荧光强度增强,荧光光谱范围变广,稳定性提升。显现汗潜手印时,适用客体范围更广,并且可通过调节激发光的波长呈现不同的显现效果。结论通过在无机荧光材料ZnS中掺杂Cu^2+可改善材料的荧光范围,从而得到适用于不同客体上汗潜手印显现且效果更好的ZnS:Cu无机紫外荧光材料。     

Application of photoluminescent CdS/PAMAM nanocomposites in fingerprint detection

Uniform and well-dispersed photoluminescent semiconductor CdS (cadmium sulfide) QDs (quantum dots) were in situ prepared inside Generation 4.0-NH(2) PAMAM (polyamidoamine) dendrimers in methanol, methanol and water mixed solutions of volume ratio 1:9, respectively. The prepared solutions containing photoluminescent semiconductor CdS QDs were utilized for detection of cyanoacrylate ester fumed fingerprints on tinfoil. The results show that fumed latent fingerprints treated with prepared CdS/PAMAM nanocomposites in methanol, 1:9 methanol:water mixed solutions emit pale yellow-green and orange luminescence respectively under ultraviolet excitation of 365 nm from an UV LED. Fumed fingerprints were successfully detected with good resolving rate and the mechanism was studied in detail.     

A scanning beam time-resolved imaging system for fingerprint detection

A highly sensitive confocal scanning-beam system for time-resolved imaging of fingerprints is described. Time-resolved imaging is a relatively new forensic procedure for the detection and imaging of latent fingerprints on fluorescent substrates such as paper, cardboard, and fluorescent paint. Ordinary fluorescent imaging of latent fingerprints on these surfaces results in poor contrast. Instead, the specimens are treated with a phosphorescent dye that preferentially adheres to the fingerprint which allows time-resolved discrimination between the fingerprint phosphorescence and the background fluorescence. Time resolved images are obtained by synchronizing the digital sampling of the specimen luminescence with the on-off cycle of the chopped illumination beam. The merit of this technique is illustrated with high contrast images of fingerprints obtained from the fluorescent painted surface of a Coke can.     

Optimization and initial evaluation of 1,2-indandione as a reagent for fingerprint detection

1,2-Indandione has been used to develop fluorescent fingerprints on porous materials such as paper. The compound reacts with amino acid residues to produce highly fluorescent fingerprint ridges. An optimized formulation and treatment protocol for using the reagent is presented here. The reagent is applied as a solution in HFE7100 containing acetic acid and ethyl acetate. Treated articles are heated at 100 degrees C for 10 min at ambient humidity and stored in the dark before recording the fingerprints using fluorescence photography or digital imaging. Photodecomposition of the fluorescent fingerprints has been observed. Storage in the dark reduces degradation, extending the lifetime of the fingerprints. Other chemical methods to stabilize the fingerprints proved unsuccessful. Comparisons of the performance of 1,2-indandione with DFO in CFC113 performed on a limited range of substrates indicated that the reagent might be an effective method for the development of latent fingerprints despite the new reagent producing less intense fluorescence.     

Photoluminescent semiconductor nanocrystals for fingerprint detection

The concept of utilizing photoluminescent semiconductor nanocrystals for latent fingerprint detection, especially in concert with phase-resolved imaging for background fluorescence suppression, is reduced to practice with CdS nanocrystals that are capped with dioctyl sulfosuccinate. The nanocrystals are dissolved in heptane or hexane and are applied in much the same way as staining with fluorescent dye, on articles that have been pre-fumed with cyanoacrylate ester and also on the sticky side of electrical tape without pre-fuming. Since CdS can form a photoluminescent nanocomposite with dendrimers, a feasibility examination of dendrimer tagging of fingerprints has also been conducted.     

Revisiting the Thermal Development of Latent Fingerprints on Porous Surfaces: New Aspects and Refinements*

Abstract: Although the ability to develop latent fingerprints on paper using heat alone has been noted previously, it has been considered impractical for casework and inferior to other techniques. Here a new refinement of the technique is demonstrated for the high quality development of latent fingerprints on porous surfaces such as paper. Fingerprints deposited on various papers were developed by exposing them to hot air with a temperature in the vicinity of 300°C, for periods of c. 10–20 sec. Several different heating methods were tested. The novel observation was made that after shorter heating times, fluorescent prints could be observed. These became visible after longer heating times, as noted by earlier workers, but with greatly improved contrast compared with their results. Prints from various donors (and aged prints) were developed with excellent ridge contrast. Direct heating methods (such as with a hot plate or press) produced inferior results. The refined technique, which is simple, safe and inexpensive compared with conventional methods, has great potential for use in forensic laboratories.     

荧光二氧化硅纳米粒子的制备及在手印显现中的应用

目的制备二氧化硅纳米粒子并探索其在手印显现中的应用。方法先制备亲油性二氧化硅纳米粒子,然后加入不同的荧光物质,通过控制变量法筛选出最佳的纳米粉末与荧光粉末的质量比。将制备出的荧光二氧化硅纳米粉末与纳米粉末、荧光粉末进行手印显现效果的比较。结果荧光二氧化硅纳米粒子对多种不同载体表面的潜手印有良好的显现效果。结论荧光二氧化硅纳米粉末与传统粉末相比,在显现有背景干扰客体上的手印有明显优势;与普通荧光粉末相比,荧光二氧化硅纳米粉末具有与手印物质结合效果好,毒性小,不易刷糊,成本低的优势。     

水溶性碲化镉量子点溶液显现血潜指纹

目的建立巯基丁二酸修饰的水溶性碲化镉量子点溶液（MSA/CdTe QDs）显现多种客体表面的血潜指纹的方法。方法利用量子点对人体血液成分的特异性标识作用,365nm紫外光激发使其荧光显像。结果 MSA/CdTe溶液显现时间显著短于文献报导的同类方法;显现效果和灵敏度优于显现血潜指纹常用试剂四甲基联苯胺和氨基黑10B。结论水溶性MSA/CdTe溶液适于显现多种客体表面的血潜指纹,效果优异。