Visualizing latent fingerprints on color-printed papers using ultraviolet fluorescence

Laser detection of latent fingerprints on a white paper has been performed, previously. Ultraviolet fluorescence from various kinds of printer toner and ink used for home printers were measured to study fluorescence imaging of fingerprints on a color-printed white paper. The experimental system consisted of a nanosecond pulsed tunable laser and a cooled CCD camera. Excitation wavelengths are 230 and 280 nm. Fourteen printers consisting of three color laser printers, three color inkjet printers, five monochrome laser printers, two monochrome copy machines, and a color copy machine were tested. Toner and ink of most printers exhibited fluorescence in the region from 360 to 550 nm. In most cases, clear fluorescence images were obtained by time-resolved imaging with a band-pass filter and 280-nm excitation. However for toners from laser color printers that showed strong fluorescence, better results were obtained with 230-nm excitation. Latent fingerprints on a photograph page and a black-character page of a newspaper were also imaged.     

Preliminary Study on Determining the Sequence of Intersecting Lines by Fluorescence Technique

The determination of the sequence of intersecting lines is an important part of questioned document examinations. A fluorescence technique was used to determine the sequence of heterogeneous intersecting lines produced using inkpad ink, stamp‐pad ink, ballpoint pens, gel pens, fountain pens, colorants of carbon paper, photocopiers, laser printers, and inkjet printers. A SteREO Discovery.V20 equipped with the ZEN Blue Lite software was chosen to perform the tests.As the results obtained from the study were positive under most conditions, the fluorescence technique was found to be very successful in determining the sequence of intersecting lines from ballpoint pen, gel pen, fountain pen, photocopier, laser and inkjet printers, and inkpad inks. The method was also successful in determining the sequence of intersecting lines from ballpoint pen, photocopier, laser printer, and stamp‐pad inks under most conditions. The technique was not successful in determining the order of crossing lines blending together.     

Examination of spur marks found on inkjet-printed documents

In this paper, we propose the examination of spur mark evidence on inkjet-printed documents. Spur marks are tool marks created by the spur gears in the paper conveyance system of many inkjet printers. The relationship between printouts and printers were investigated by comparing the spur marks found on printed documents with reference spur marks sampled from known printers. The comparison was based on two characteristics of spur marks: pitch and mutual distance. These characteristics extracted the geometric features of spur marks and provided information on the type of spur gears and their location in the paper conveyance system. The spur marks on a printout matched the reference spur marks within three percent of the measured values. Spur marks were considered to be effective class characteristics to identify certain brands of inkjet printers since spur gears are used in many types of these machines.     

Classification algorithm using halftone features of counterfeit bills and CNN

With recent advancements in image processing and printing technology, home printers have improved in performance and grown more widespread. As such, they have been increasingly used in counterfeiting and forgery. Most counterfeit bills in Korea have been created using home scanners and printers. The identification of printer model is thus necessary to rapidly track down criminals and solve crimes. Household printers can be largely divided into inkjet and laser printers. These two types of printers print halftone textures instead of continuous images. This study proposed a technique of printer classification based on halftone textures that can be observed in printed documents. Since halftone textures are expressed as periodic lattices, the images were transformed via FFT, which is highly effective at expressing periodicity. ResNet, known for its superior gradient flow, was used for training. The experiment was conducted on 12 color laser jets and 2 inkjets. Scans of bills printed by each printer were used, and halftone texture analysis was performed on these images for printer model classification. Each image was cropped into several parts; one of the cropped parts was analyzed. The analysis showed that laser printers could be 100% distinguished from inkjet printers. An accuracy of 98.44% was achieved in make classification. When 50 cropped images were used instead of a single image, the technique achieved 100% accuracy in model classification. The proposed technique is non-destructive; it offers high accessibility and efficiency as it can be performed using a scanner alone, without requiring additional optical equipment.     

利用彩色文件上的图文特征鉴别喷墨打印机品牌

目的通过彩色文件上的图文特征鉴别喷墨打印机的品牌。方法在体视显微镜下观察采用不同喷墨机理的惠普、佳能和爱普生三大品牌喷墨打印机打印的彩色图文。结果通过对彩色图文上六种墨迹形态特征的比较,发现三大品牌喷墨打印机打印的彩色图文存在明显差异。结论依据这六种特征对三大品牌的喷墨打印机进行鉴别。     

Application of capillary electrophoresis to examination of color inkjet printing inks for forensic purposes

In the process of questioned document examination, the discrimination of inkjet printing inks is becoming more necessary due to increasingly frequent counterfeiting of documents printed by inkjet printers. Therefore, a method based on micellar electrophoretic capillary chromatography (MECC) has been developed and applied to analysis of such inks extracted from paper. With the use of an optimized and validated analytical procedure, multielectropherograms of inks taken from various models of printers made by various producers (Hewlett-Packard, Epson, Brother, Lexmark and Canon) were created. It was shown that effective differentiation of individual inks was possible in terms of migration time, order and specific shapes of characteristic peaks. By comparison of recorded UV-Vis spectra, the identification of main dyes was also achievable. The usefulness of the method was confirmed by an intralaboratory test of utility, in which several forged printouts were successfully examined. The obtained results proved that the proposed procedure is a useful tool that could be applied to ink discrimination and group identification of dyes originating from inkjet printing inks. Consequently, the developed method can be applied in the forensic field, including investigation of the authenticity of documents.     

常用彩色激光打印机打印文件暗记特征的初步研究

目的收集当前我国常用不同品牌和型号的彩色激光打印机打印样本,研究打印文件上暗记特征的提取分析及其变化规律,探讨彩色激光打印文件暗记特征在鉴定实践中的应用及其在打印文件防伪措施中的价值。方法使用显微镜、文检仪及有关图像处理技术分别检验了彩色激光打印机的打印文件样本。结果彩色激光打印机打印文件上会出现暗记特征,且不同品牌的暗记特征出现规律、形态特征和点阵特征不同。结论暗记特征可作为初步鉴别彩色激光打印机品牌型号及打印时间的依据,具有防伪价值,但其在鉴定实践中还存在一定的局限性,有待进一步研究。     

The effects of latent print processing on questioned documents produced by office machine systems utilizing inkjet technology and toner

Counterfeiting of currency and identity documents, death threats, illegitimate business transactions, and terrorist-related activities are some examples of the types of crimes that often involve documents produced from printers and copiers. Although standard protocol typically requires a questioned document (QD) examination prior to latent print (LP) processing, occasionally, items of evidence may be submitted for a QD examination following the application of a series chemicals utilized in the development of latent fingerprints. In such cases, the forensic examiner must take into account any previous treatments prior to initiating an examination on documents produced with a printer or copier. This study was devised to examine the effects of a latent print development technique [ninhydrin, physical developer, and a bleach enhancer] on the physical and chemical examination of documents produced from copiers and printers.     

Determination of the Chronological Order of a Laser Printing and Gel Pen Writing Without any Crossing Strokes

Laser printers and writing instruments are being exploited by the forgers to produce fabricated documents. They often produce such documents by appending genuine signature on a blank sheet and later printing on it. Often these fabricated documents do not contain intersection of strokes and may pose a difficulty to forensic document examiners in analyzing cases related to such documents. Keeping in mind the limited research work done on nonintersecting strokes, the present study has been conducted with an aim to determine the sequence of nonintersecting strokes of gel pens and laser printers. Three hundred samples of nonintersecting strokes of gel pen ink and laser printing were prepared. Of these 300, 150 had laser-printed text below the gel pen strokes and the remaining 150 were prepared with gel pen stokes below the laser-printed text. The samples have been analyzed using Nikon SMZ 800N stereomicroscope. Three micro-conformation features, that is, pattern of toner distribution, ink distribution, and fiber distribution have been observed in the samples. The results demonstrate the successful establishment of sequence of nonintersecting strokes in case of gel pen and laser-printed documents by the determination of micro-conformation features.     

On the spectroscopic cum chemometric approach for differentiation and classification of inkjet,laser and photocopier printed documents

The potential of ATR-FTIR spectroscopy combined with chemometric methods is explored for the rapid and no-destructive forensic investigation of inkjet, laser and photocopier printed documents. The aim of the present study is to ascertain the source of origin of unknown printed documents, i.e., whether it belongs to the laser or inkjet or photocopier devices and also to visualize the intra-variations present in the same types of printed documents. It is observed that these printing inks contain polystyrene, bisphenol A, methyl acrylate and aromatic ethers as the main chemical constituents. The standard normal variate normalization is performed in order to eliminate the differences caused by the amount of toner powder/inks. The discrimination among printed documents is achieved by using chemometric methods including hierarchal cluster analysis and principal component analysis. Further, linear discriminant analysis is used to classify the unknown printed documents into its respective class of printing devices. The present methodology provides robust, non-destructive, reproducible, and simultaneous identification methods for printed documents.     

Raman spectroscopy and laser desorption mass spectrometry for minimal destructive forensic analysis of black and color inkjet printed documents

Inkjet ink analysis is the best way to discriminate between printed documents, or even though more difficult, to connect an inkjet printed document with a brand or model of printers. Raman spectroscopy and laser desorption mass spectrometry (LDMS) have been demonstrated as powerful tools for dyes and pigments analysis, which are ink components. The aim of this work is to evaluate the aforementioned techniques for inkjet inks analysis in terms of discriminating power, information quality, and nondestructive capability. So, we investigated 10 different inkjet ink cartridges (primary colors and black), 7 from the HP manufacturer and one each from Epson, Canon and Lexmark. This paper demonstrates the capabilities of three methods: Raman spectroscopy, LDMS and MALDI-MS. Raman spectroscopy, as it is preferable to try the nondestructive approach first, is successfully adapted to the analysis of color printed documents in most cases. For analysis of color inkjet inks by LDMS, we show that a MALDI matrix (9-aminoacridine, 9AA) is needed to desorb and to ionize dyes from most inkjet inks (except Epson inks). Therefore, a method was developed to apply the 9AA MALDI matrix directly onto the piece of paper while avoiding analyte spreading. The obtained mass spectra are very discriminating and lead to information about ink additives and paper compositions. Discrimination of black inkjet printed documents is more difficult because of the common use of carbon black as the principal pigment. We show for the first time the possibility to discriminate between two black-printed documents coming from different, as well as from the same, manufacturers. Mass spectra recorded from black inks in positive ion mode LDMS detect polyethylene glycol polymers which have characteristic mass distributions and end groups. Moreover, software has been developed for rapid and objective comparison of the low mass range of these positive mode LDMS spectra which have characteristic unknown peaks.     

通过辨别、对比和检验材料中的变化测定文件日期

对一份文件最早制成时间的检验一直以来都是全世界文检界的难题之一。核实可疑文件的制成时间没有统一的方法,目前主要通过对纸张、墨迹、打字机、复印机、打印机、传真机、印刷品,以及笔迹和签名等因素的检验来确定一份文件的制成时间。文件检验人员需要充分利用他们手中的文件的内容及文件周边信息所反映出来的条件和材料,进而得出结论。     

通过辨别、对比和检验材料中的变化测定文件日期

对一份文件最早制成时间的检验一直以来都是全世界文检界的难题之一。核实可疑文件的制成时间没有统一的方法,目前主要通过对纸张、墨迹、打字机、复印机、打印机、传真机、印刷品,以及笔迹和签名等因素的检验来确定一份文件的制成时间。文件检验人员需要充分利用他们手中的文件的内容及文件周边信息所反映出来的条件和材料,进而得出结论。     

喷墨打印机走纸步进量作为机种特征的实验研究

目的确定一个有助于识别喷墨打印机种的墨迹特征。方法对Epson、HP、Canon和Lexmark四大品牌的65种喷墨打印机的实验输出样本墨迹中重复出现的瑕疵进行分析。这些瑕疵包括：横向漏白条纹、重叠条纹和纵向对接错位等。结果相邻两个瑕疵之间的距离与打印机固有的走纸步进量直接相关。观测得出的走纸步进量既稳定又反映特定机种。结论将走纸步进量作为一个喷墨打印机种特征来利用具有较强的有效性和可行性。     

打印复印文件朱墨时序表观特征初探

本文详细介绍了一案例的检验过程,并通过简单实验对激光打印、静电复印形成文件的朱墨时序的表观特征进行了粗浅的探究。总体而言,两种时序在朱墨交叉点的表观特征上具有文字与印文均完整、肉眼感觉文字均压在印文之上的共同点;在两者本质的差异点上,先朱后墨表现为交叉点的墨粉与未交叉部位一致,先墨后朱表现为交叉点的墨粉光泽度增加、具有潮湿感、以及易出现水珠状的印油积聚现象。     

An Examination of the Sequence of Intersecting Seal and Laser Printing Toner Line

Examining the sequence of intersecting seal and laser printing line is a significant method of determining the authenticity and validity of documents. In this study, five brands of stamp pad inks, three types of inkpads and seven kinds of laser printers were used to make heterogeneous line intersections. Observation method of physical characteristics, scraping technique and fluorescence method was used to determine the sequence of intersecting lines. Distinguishing features were noted between the materials produced in both sequences. As the results obtained from the study were positive, these features might provide a scientific basis for accurately determining the sequence between laser printing line and inkpad (stamp pad ink) seal.     

Analysis of Pigmented Inkjet Printer Inks and Printed Documents by Laser Desorption/Mass Spectrometry*,†

Abstract: Anyone with a computer, scanner, and color printer has the capability for creating documents such as identification cards, passports, and counterfeit currency. Laser desorption mass spectrometry (LDMS) has been demonstrated as a powerful tool for colorant analysis. Inkjet printers are now moving largely toward the use of pigments as colorants; their insolubility makes analysis by simpler methods such as thin‐layer chromatography no longer an option. Recent developments in pigmented inkjet printer inks, such as gloss optimizers that coat pigment particles, may prohibit colorant analysis by LDMS. We demonstrate here that pigments used in inks from two Epson printers can be detected and analyzed by LDMS. Also, LDMS spectra of various colors created using a 4‐cartridge (cyan/magenta/yellow/black, CMYK) inkset are evaluated, to begin to develop an approach for unraveling LDMS data from real samples, to determine the number of inks used by a printer, and the chemical composition of the colorants.     

A Preliminary Study on Sources of Banding Artifacts for the Identification of Monochromatic Laser Printers,

The analysis of questioned documents printed with monochromatic toner has been a great challenge to document examiners. Banding artifacts, which are often perceived in the outputs of laser printers, could be a solution to the identification of printers. In this study, sources other than the gear transmission errors were discovered for some primary banding frequency components. By detecting the angular velocity variation of photosensitive drums and other rotating parts of the tested printers and comparing them with the banding signals extracted from the printouts, the authors located the sources of banding frequency components. It was shown that the sources of some primary and persistent banding signals, which were previously unknown, were traced to the periodic velocity variations of the motors or the timing belts. As inherent signatures, banding artifacts could be promising features for discriminating documents printed by individual laser printers.     

Study of Color Laser Printer and Photocopier Class Using a Pattern Location Measurement Method

A trace code pattern location measurement approach is proposed. It includes a method that can precisely extract the trace code pattern to identify the color laser printer or photocopier class. In this study, we collected 379 samples from 15 brands, including 129 models and 196 printers or photocopiers. The trace code pattern class is identified. Four class characteristics are used to identify the print source: (i) the relation between the pattern and print output direction; (ii) observation of the shape features from among the trace code pattern units; (iii) the feature arrangement from among the trace code pattern units; and (iv) the arrangement relation of the trace code pattern. Blind testing shows that the accuracy of the proposed method is approximately 96.9% for the Questioned Document Examiners, and 84.3% in the non‐Questioned Document Examiners. It is thus an effective technique for determining a print's color laser printer or photocopier source class.     

Stability and Specificity of Counterfeit Protection System Code

In this study, the stability and specificity of a counterfeit protection system (CPS) code were determined. This research involved an analysis of a counterfeit protection system code unit over time using the pattern location measurement method. We collected 379 sample sheets from 196 printers or photocopiers, covering 14 original brands, including 129 models. There was an interval of at least two months between the collections of samples from each machine. Four types of characteristics were established: CPS pattern unit, distance of the CPS unit, position of dots, size and shape of the dot. Except for the partial changes in the Xerox brand, no other brand exhibited changes over time. This implies that the CPS characteristics are stable. Meanwhile, no correlation was noted between the combinations of the characteristic systems in the collected samples, which implied strong specificity.