应用判别分析法判断胸骨性别的研究

本文测量了85例国人胸骨(男52,女33)的全长、柄长、体长、柄最大宽、体最大宽、柄最大厚及体最大厚七个项目,发现所有项目都具有非常显著的性别差异,但两性间重迭率较高,用单项难以准确判定性别。为此,采用 Fisher 判别分析法建立了判定胸骨性别的判别函数,判别率最高达90%。考虑到残缺胸骨的性别鉴定,亦建立了相应的判别函数。与国外研究相比,本文方法判别率较高且更具有实用价值。     

胸骨性别判定的研究进展

人类胸骨的形态特征与性别具有密切关系,各项研究普遍认为,胸骨具有显著性别差异,其指标有:胸骨总长、胸骨体长、柄宽、柄厚、体宽、体厚、胸骨面积。但指标胸骨柄长、胸骨指数的性别差异仍然存在争议。合理联用性别差异显著的相关指标,建立性别判别方程式,确定相应的临界判别值,判定性别即可获得较高的正确率。现有数据显示,国内外研究胸骨判定性别结果的精度可高达90%以上。目前国内的研究方法主要为通过手工测量长度指标获取测量值,计算有关指数,此类方法对骨骼的处理费时费力且人为因素影响较大。医学影像技术的进步,有望简化处理该过程,使得研究结果更为科学精确,特别是多层螺旋CT在法医人类学检查、测量及同一认定中具有实用价值。借鉴国外一些利用X线摄影、CT扫描技术进行有关研究的方法,采用多层面重组结合三维重建图像的测量方法有望获得更为准确的测量数据,为胸骨的性别判定提供1种快捷、准确的新途径。本文对国内外胸骨性别差异的相关研究成果进行了综述,尤其关注了法医学个体识别方面的数据,这些资料为研究胸骨三维重建影像的形态特征奠定了基础,将有力促进胸骨个体识别方法的突破性发展。     

第12胸椎三维重建图像性别判定研究

目的考察计算机断层扫描(CT)技术测量中国汉族第12胸椎判定性别的效果,探索CT技术在法医人类学人体骨骼测量研究中应用的可行性。方法确定11项径线指标测量第12胸椎多层面重组(MPR)三维重建图像,剔除不稳定指标后计算四项比值指标,统计各项指标的数据考察CT测量第12胸椎判定性别的效果。结果剔除两次测量结果不稳定的三项指标后的12项指标性别差异显著,建立了7个性别判定方程,综合判别率在80.0%~91.6%,仅含椎体指标的方程性别判别率最高达91.6%。结论中国汉族人第12胸椎形态学测量指标具有性别差异,CT技术可以准确测量骨骼,对法医人类学人体骨骼测量研究具有应用价值。     

中国汉族成人胸骨多项测量值与身高关系的研究

目的 研究中国汉族成人胸骨多项测量值与身高的关系,建立以胸骨推算身高的方法。方法 测量135例(男100,女35)已知身高的中国汉族成年人干燥胸骨的全长、柄长、体长、柄最大宽、柄最小宽、体最大宽、体最大厚、柄厚、柄最大厚9项指标,采用多元逐步回归分析的方法,分别求出由男性(分年龄组)和女性胸骨的多项测量值推算身高的多元回归方程式。结果 所建立的4个男性(分年龄组)和1个女性胸骨推算身高的多元回归方程式,其复相关系数(R)在0.6237～0.7350之间,标准差(s)在4.5720—7.0348之间。结论 根据人体胸骨的多项测量值可以推算其身高,准确性略低于四肢长骨的同类推算;相同身高组的男女性胸骨多项测量值均存在明显的性别差异,胸骨柄长不能作为单因素推算身高的测量指标。     

骨骼CT三维重建图像性别判定和年龄推断研究

目的通过计算骨骼计算机断层扫描(Computed Tomography,CT)三维重建图像判定性别和推断年龄的准确率,评价利用骨骼CT三维重建图像判定性别和推断年龄的可行性。方法将法医人类学教材中性别判定和年龄推断的方法应用于539例骨骼CT三维重建图像样本,判定245例骨盆的性别,推断100例男性耻骨联合、100例男性胸骨和94例男性锁骨的年龄,计算准确率。结果骨盆性别判定准确率为98.4%,耻骨下角和坐骨大切迹是区分性别最好的两项指标。男性耻骨联合、胸骨、锁骨的年龄推断准确率在45%以上,其中锁骨双侧方程准确率最高为77%。结论利用骨骼CT三维重建图像判定性别和推断年龄具有可行性。使用大体标本建立的骨盆形态学性别判定方法可直接应用于骨骼CT三维重建图像。使用大体标本建立的男性耻骨联合、胸骨、锁骨形态学年龄推断指标、分级和评分标准以及方程需要修改和补充。     

中国汉族人腰椎的性别差异

目的提供体质人类学的数据资料 ,建立中国汉族腰椎性别判别的方法。方法根据人体骨骼测量方法 ,测量 117付 (男 80 ,女 3 7付 ,年龄 17～ 90岁 )中国汉族人腰椎的 10项指标 ;选择性别差异显著的椎测量项目 ,建立腰椎及各腰椎的性别判别方程。结果第一至第五腰椎均有 5个以上的测量项目的数据存在显著意义的性别差异 (P<0 0 5 ) ;建立的 5个腰椎及各腰椎的性别判别方程 ,判别率在 69 4%～ 91 8% ,以 5个腰椎的多项指标的性别判别方程的准确率最高 (91 8% ) ,其次为第一腰椎 (84 5 % )和第二腰椎 (82 1% )。结论中国汉族人腰椎的性别差异以第一和第二腰椎明显 ,腰椎性别判定以多项指标的准确率高     

CT-VRT测量西南地区汉族人胸骨柄体和与身高的相关性

目的采用CT容积再现技术(CT volume rendering technique,CT-VRT)测量西南地区汉族人胸骨柄体和,建立其与身高的回归方程。方法 160例(男、女性各80例)西南地区汉族成年体检者通过CTVRT(重建层厚1 mm)分别测量胸骨柄长和体长,二者的代数和即为柄体和。同时测量受检者真实身高,分别建立男、女性柄体和与身高的回归方程。结果分别建立了男、女性胸骨柄体和(x3)与身高(y)之间关系的一元回归方程(男性:y=135.000+2.118 x3;女性:y=120.790+2.808 x3)。两方程均具有统计学意义(P0.05),且预测准确性均为100%。结论 CT-VRT能作为胸骨指标测量的有效方法。采用CT-VRT测量的胸骨柄体和能应用于西南地区汉族人身高推算。     

中国汉族成人甲状软骨的性别判定

目的 建立中国汉族成人甲状软骨性别判别的函数方程。方法 对142例中国汉族成人甲状软骨(男73例,女69例)进行大体测量,选择7个性别差异非常显著的测量指标,然后采用Fisher判别分析法和Bayes逐步判别分析法,建立判定甲状软骨性别的系列判别函数。结果 建立了13个甲状软骨的性别判别方程,完整或大部分完整的甲状软骨性别判别准确率均达100％,残缺的达90％。结论 中国汉族成人甲状软骨性别差异明显,运用所建方程能够判定甲状软骨的性别。     

中国汉族人耻骨性别判定的研究

目的为了探讨耻骨性别判定的更为简便可靠的方法。方法对96副已知生前确切性别的耻骨进行了性别差异的研究,其中男性耻骨73副,女性耻骨23副。测量项目有:缘枝角,耻骨宽,耻骨联合面的高及厚。结果将耻骨的测量数据输入电脑,用SPSS软件,对耻骨的测量数据进行了统计分析,建立了耻骨性别判定的判别方程。结论其性别判别率最高可达95.5%,该方法可以用于法医学实践。     

桡骨性别鉴定的研究

目的通过对桡骨的测量,使用Fisher判别分析方法,建立了中国人桡骨性别判定的判别方程。方法本研究共测量了来自全国九省区的已知生前确切性别的210个个体的左右侧桡骨,其中男性160例,女性50例,年龄范围18岁～76岁。测量指标共有8项,使用SPSS软件,进行了桡骨左、右侧及男女性别间测量数据差异的t检验。根据对测量数据左、右侧及男女性别的检验,将差异不显著的测量项目剔除,建立了左、右侧桡骨性别判定的方程。结果单一测量指标的性别判定方程,除性别差异不显著的测量项目颈干角之外,性别判别率为57.7%～92.3%,桡骨长度测量指标的性别判别率为82.4%～88.5%,桡骨中段测量指标的性别判别率为77.8%～91.7%。完整桡骨测量指标的性别判别率91.7%～99.5%。结论本研究建立的桡骨性别判定方法,性别判定准确率高,使用方便,为中国人桡骨的性别判定提供了科学依据。     

Estimation of sex by 3D CT measurements of the foramen magnum

The purpose of this prospective study is to investigate the value and accuracy of the measurements of the foramen magnum (FM) by using three-dimensional computed tomography (3DCT). Cases were randomly selected among 100 patients (48 males, 52 females) who had temporal CT in the Radiology Department. Seven measurements of the foramen magnum on 3D images, modified from the nine lines previously defined by Giles and Elliot were made. Using Fisher's linear discriminant functions test, the length and width of right condyle and width of FM diameters were found to be statistically different in each sex (p < 0.001) with 81% accuracy. To our best knowledge, this is the first report studying 3DCT measurements of FM, resulting with a sex determination accuracy rate of 81%. CT/3DCT can be reliably used in further investigations to provide basis for anthropometric and forensic issues.     

Determination of sex for the 12th thoracic vertebra by morphometry of three-dimensional reconstructed vertebral models

Thirty-three linear measurements and two ratios were derived from 102 12th thoracic vertebrae of the Digital Korean database at the Catholic Institute for Applied Anatomy. Of 35 linear traits, 23 were sexually dimorphic. We created 23 discriminant function equations that predicted sex with 62.7-85.3% accuracy. The analysis using combinations of two factors gave higher accuracies: most equations with accuracies over 80% included at least one measurement involving the coronal diameter of the vertebral endplate. Using stepwise method of discriminant function analysis, three variables predicted sex with 90.0% accuracy: the coronal diameter of the superior endplate of the vertebral body, the ratio of anterior to middle height of the body, and the length of the left mammillary process and pedicle. Coronal dimensions of the vertebral body represented the major sex difference. These equations will help forensic discrimination of the sex of this vertebra among Koreans.     

Sex determination of Chinese femur by discriminant function

The objective of this study was to provide a method of sex determination for Chinese femur, especially for fragmentary remains. Statistical analysis of 17 measurements based on 141 northeastern Chinese femora shows that all measurements have significant sex differences. Sex determination by the midpoint method of a single measurement can obtain an average accuracy of 76.8%. The results indicate that of all dimensions the maximum head diameter is the best discriminator of sex. It alone can determine the sex of a femur with 85.1% accuracy. The results also show that maximum head diameter, transverse head diameter, epicondylar breadth, upper breadth, and medial condylar length have higher sexual dimorphisms than the dimensions of length. According to the result to stepwise discriminant analysis and the need for sexing fragmentary remains, 22 discriminant functions composed of various combinations of variables were calculated which can determine the sex of the femur correctly 82.3 to 87.2%. The methods of sex determination provided by this paper can be used to sex poorly preserved femora.     

Craniometric diagnosis of skeletal and somatotype mass

The paper presents diagnostic models for evaluation of ash mass (bone fragments, bone ashes), sex, length and mass of the burned body. Individual data by M. Warren and W. Maples (1997) on 85 adult Americans were used. On the basis of a canonical discriminant analysis and multiple linear regression equations the authors have developed models for diagnosis of ash residue mass as well as the burned body's sex, body length and mass. The above models can be used directly on the place of the criminal body cremation. They do not require determination of anatomic appurtenance of bone fragments and their osteometric examination.     

头颅CT片性别的识别

目的 通过头颅CT片研究性别识别的方法.方法 在头颅CT片测量头颅多项指标,应用各个指标进行二分类logistic回归分析建立性别判定方程. 结果应用颧弓间距指标可以建立一元方程:Z=-69.051 0.521X1,p=1/1 e-z.应用多项指标可以建立多元方程:Z=-115.873 0.585X1 0.119X4 0.254X7 0.229X8 0.101X6,P=1/1 e-z.结论 根据头颅CT片进行性别判定时,最好是测量多项指标.在指标不全时,就只需测量颧弓间距,也可以有较好的判别效果.     

Sexual Dimorphism of Maxillary Sinus Dimensions Using Cone‐Beam Computed Tomography

Sex determination of unknown persons plays an important role in forensic medicine. Cone‐beam computed tomography (CBCT) is an excellent imaging modality for accurate measurement of maxillary sinus dimensions. This study aimed to evaluate whether maxillary sinus measurements on CBCT scans can be applied for sex determination. The width, length, and height of maxillary sinuses in CBCT images of 100 patients (50 males and 50 females) were measured. Student's t‐test and discriminant function analysis were used to compare differences in the measured parameters between males and females. The correct predictive accuracy rate of sex determination was 78% in females and 74% in males with overall accuracy of 76%. Based on discriminant analysis, the most pronounced variable in differentiation of sex groups was maxillary sinus height. This study suggests that maxillary sinus measurements can be valuable for sex determination in forensic investigation, especially for cases in which other traditional methods are not applicable.     

Sex determination by discriminant analysis of patella measurements

The authors have analyzed 80 skeletons (40 males and 40 females) from the collection at the Institute of Legal Medicine of the University of Bari belonging to a known contemporary Southern Italian population; time of death was around 1970 and ages ranged from 25 to 80 years. Seven measurements taken on 80 intact, undeformed right patellae (max height, max width, thickness, height and width of the external facies articularis, height and width of the internal facies articularis) were used to determine sex by multivariate discriminant analysis. One function associating two parameters (max width and thickness) obtained the highest value of correct sex determination with a rate of 83.8%; other functions showed a higher percentage of misclassification (up to 17.5%). This study tests the success rate of correct sex prediction based exclusively on patellar dimensions. The discriminant functions carried out by statistical analysis may aid the forensic anthropologist when no other human skeletal remains suitable for sex determination are available.