05式警用转轮手枪弹壳接触DNA检验方法的比较

目的比较05式警用转轮手枪弹壳表面接触性DNA检验方法,为实际检验提供参考和借鉴。方法制备40例击发后手枪弹壳的模拟样本,分别用两步转移法提取弹壳表面不同部位检材,采用两种DNA提取法和两种扩增试剂盒对样本进行STR分型检验,比较评价检验结果。结果避开发射药残留区域采用两步转移法提取样本,有助于提高检出率;Chelex-100联合Microcon-100法提取模板DNA的产量最高可达1.18ng,高于Mini M48试剂盒法(0.91ng);MiniFilerTM试剂盒的等位基因检出率(23.61%)高于IdentifilerTM试剂盒(6.41%)。结论采用选择适当区域提取检材,采用Chelex-100联合Microcon-100法提取DNA,经MiniFilerTM试剂盒扩增,进行弹壳接触DNA分型的效果较好。     

A part-declared blind testing program in firearms examination

In 2015 and 2016 the Central Unit of the Dutch National Police created and submitted 21 cartridge case comparison tests as real cases to the Netherlands Forensic Institute (NFI), under supervision of the University of Twente (UT). A total of 53 conclusions were drawn in these 21 tests. For 31 conclusions the underlying ground truth was “positive”, in the sense that it addressed a cluster of cartridge cases that was fired from the same firearm. For 22 conclusions the ground truth was “negative”, in the sense that the cartridge cases were fired from different firearms. In none of the conclusions, resulting from examinations under casework conditions, misleading evidence was reported. All conclusions supported the hypothesis reflecting the ground truth. This article discusses the design and results of the tests in more detail.     

Genetic polymorphism of 17 STR loci for forensic use in Chinese population from Shanghai in East China

Allele frequencies for 17 STR loci found in Identifier kit and PowerPlex^®16 Monoplex System were determined in a sample of 1000 unrelated individuals living in Shanghai in East China. The values of observed heterozygosity (Ho), power of discrimination (PD), probability of paternity exclusion (PE) and polymorphism information content (PIC) were calculated. All loci were in accordance with Hardy–Weinberg equilibrium (p < 0.05). The obtained frequency distributions were compared with other previously reported population data.     

Generating DNA profiles from immunochromatographic cards using LCN methodology

The aim of this research was to obtain DNA profiles from immunochromatographic test devices which have already yielded positive results with body fluids obtained from fourteen volunteers. Three different immunochromatographic cards for the identification of human blood and one for the identification of human saliva were used for this research. Each body fluid was detected using the appropriate immunochromatographic card. The used cards were kept at room temperature for various lengths of time. The membranes were removed at the end of the designated times and the entire strip was extracted using low copy number (LCN) extraction procedure. The extracted DNA was amplified using reduced amplification volume and higher PCR cycle numbers. Autosomal STR profiles were detected using AmpFℓSTR^® Identifiler™ PCR Amplification Kit from Applied Biosystems (AB). Additionally, DNA extracted from the male volunteers was amplified using the AB AmpFℓSTR^® Yfiler™ PCR Amplification Kit. Analysis of the amplified products was carried out by capillary electrophoresis injection on the AB 3130xl Genetic Analyzer. The generated DNA data was analyzed using the SoftGenetics GeneMarker^® HID Version 1.7 software.Autosomal and Y-STR DNA profiles were obtained from most of the cards which were stored at room temperature for up to three months. DNA profile was obtained from all four types of the immunochromatographic cards used in this study. These profiles were concordant with the profiles obtained from the donors’ reference samples.     

Recovery of DNA and fingerprints from touched documents

This study investigated the various factors affecting DNA profiling from DNA recovered from fingerprints deposited on paper before and after fingerprint enhancement treatments. The DNeasy^® plant mini kit (QIAGEN^®) was found to improve DNA recovery from paper by over 150% compared with the QIAamp^® mini kit. A significant decrease in the amount of DNA recovered was observed following treatment with DFO and/or Ninhydrin. This decrease in yield did not have a comparably significant effect on the quality of the SGM Plus™ profiles. Furthermore, this study found that whilst certain paper types, such as newspaper, magazine and filter paper allowed for the good recovery of DNA, common office paper and white card, strongly interfered with the recovery of DNA resulting in poor quality profiles.     

Comparison of three DNA extraction methods for three different types of fired and unfired ammunition

When handling ammunition for gun loading, epithelial cells from the hands can become adhered to the metal surface, and this trace is a potential source of DNA. This work aimed to compare the efficiency of three DNA extraction methods from fired cartridge cases from three different types of firearms: a 12-gauge shotgun, a point 40 S&W pistol, and a 7.62 mm rifle. Nine volunteers were involved in this study handling 42 pieces of ammunition overall. The unfired ammunition was handled by a known good donor, and we used this data for comparison. DNA profiling was carried out with EZ1 DNA Investigator Kit for EZ1 Advanced XL automated DNA extraction, QIAmp DNA Investigator kit for a non-automated silica-based membrane column method, and direct lysis protocol for a non-automated in-house one. Samples were collected with 0.5 × 0.5 cm pieces of FTA filter paper moistened with distilled water. Quantiplex Pro RGQ kit and Fusion Powerplex 6C were used for genotyping samples. QIAmp DNA Investigator method resulted in the best number of alleles recovered for both conditions tested, both unfired and fired ammunitions: 77 % vs. 19.3 %, followed by the automated extraction (28.6 % vs. 4.3 %) and lysis protocol (0 % vs. 3.9 %). Degradation data from fired cartridge cases were 27 % for column method, 50 % for lysis protocol, and 87 % for EZ1 kit. Kruskal-Wallis test for mean DNA concentration from these samples returned p < 0.05, and Dunn’s multiple comparison test indicated a significant difference between calibers 0.40 S&W and 12-gauge shotgun from lyses protocol method. We did not detect any other significant differences on the test. The 12-gauge shotgun cartridge cases resulted in a high number of alleles overall (56.8 %). The numerous steps for DNA extraction and purification in the column method may explain its better performance. Although the results obtained indicate that all methods be used for DNA extraction from this type of evidence, the silica-based membrane column method appears to be more efficient.     

Post-injection hybridization of complementary DNA strands on capillary electrophoresis platforms: A novel solution for dsDNA artifacts

Several laboratories have reported the occurrence of a split or n − 1 peak at the vWA locus in PowerPlex^® 16 and PowerPlex^® ES amplification products separated on 4- and 16-capillary electrophoresis instruments. The root cause of this artifact is post-PCR reannealing of the unlabeled, unincorporated vWA primer to the 3′-end of the tetramethylrhodamine (TMR)-labeled strand of the vWA amplicon. This reannealing occurs in the capillary post-electrokinetic injection. The split peak is eliminated by incorporation into the loading cocktail of a sacrificial hybridization sequence (SHS) oligonucleotide that is complementary to the vWA primer. The SHS preferentially anneals to the primer instead of the TMR-labeled strand of the vWA amplicon. In addition, the n − 10/n − 18 artifact that may be seen at the vWA locus was determined to be due to double-stranded amplicon formed post-electrokinetic injection into the capillary. This was also eliminated by adding in two Complementary Oligo Targets (COT1 and COT2) in addition to the SHS oligonucleotide into the loading cocktail. These three oligonucleotides are complementary to the 33 bases at the 5′-end of the unlabeled vWA amplicon strand and the 60 bases at its 3′-end and therefore compete for hybridization to the TMR-labeled amplicon strand. Incorporation of these three oligonucleotides in the Internal Lane Standard 600 (ILS600) eliminate both the split peak and n − 10/n − 18 artifact in PowerPlex^® 16 and PowerPlex^® ES amplification products without affecting sizing of alleles at the vWA locus or any locus in the PowerPlex^® 16, PowerPlex^® Y, PowerPlex^® ES, AmpFlSTR^® Profiler Plus^® ID, AmpFlSTR^® Cofiler^®, and AmpFlSTR^® SGM Plus^® kits.     

Validation of Reduced Reagent Volumes in the Implementation of the Quantifiler® Trio Quantification Kit

The Quantifiler^® Trio Quantification Kit has been developed to quantify the total amount of amplifiable and human male DNA in samples and to estimate the extent of DNA degradation. To minimize the cost of DNA quantification, we evaluated kit performance using a reduced volume of reagents (1/10‐volume) using DNA samples of varying types and concentrations. Our results demonstrated concordance between the manufacturer's method and the low‐volume method for DNA quantification, DNA degradation index estimation, and human male DNA quantification. We confirmed the practical utility of the low‐volume method with 109 casework samples by evaluating short tandem repeat (STR) profiling success with respect to DNA quantity and quality. We also defined a cutoff value for DNA quantity to ensure reliable STR results. Using a reduced volume of reagents, 10 times more reactions per kit are possible; accordingly, this method reduces the cost of DNA quantification, while maintaining performance.     

Analysis of AmpFlSTR MiniFiler™ loci and its forensic application

The allele frequencies of eight MiniFiler™ loci have been analyzed in 101 Japanese individuals living in Kanagawa with informed consent by means of ABI 310 Genetic Analyzer. A total of 7 alleles for D13S317, 8 alleles for D7S820, 11 alleles for D2S1338, 11 alleles for D21S11, 5 alleles for D16S539, 14 alleles for D18S51, 8 alleles for CSF1PO, and 13 alleles for FGA were observed. The polymorphic profiles of these MiniFiler™ loci in the present study were essentially the same as those obtained by using the AmpFlSTR^® Identifiler^® PCR Amplification kit. The combined matching probability of eight MiniFiler™ loci and cumulative probability of paternity exclusion were estimated as 1.97 × 10⁻¹⁰ and 0.9996, respectively. The MiniFiler™ kit was useful for individual identification in forensic analysis.     

Long Allele Designations at D2S1338 and D19S433 Loci as Influenced by Various Multiplex STR Kits

European forensic laboratories are replacing the STR multiplex kits with the new generation 16/17 STR kits. This study examines the influence of the new generation kits and the new Applied Biosystems 3500xL Genetic Analyzer on the designation of long D2S1338 and D19S433 off‐ladder alleles. Different allele calls were obtained using the new NGM? (Applied Biosystems) and PowerPlex^® ESI? (Promega) kits compared with AmpF?STR^® SGM Plus? kit (Applied Biosystems). Sequence analysis was used to determine accurate allele designation. The new multiplex kits and the 3500xL Genetic Analyzer improved accuracy of long allele designations. DNA databases worldwide include countless profiles obtained by previous kits. Discrepancies between the new and former technologies may cause failure to detect hits. Discordance is expected due to primer sequence differences between various kits. An additional discordance, occurring in long alleles, independent of primer sequence is reported in this study.     

Simple and highly effective DNA extraction methods from old skeletal remains using silica columns

The recovery of DNA data from old skeletal remains is often difficult due to degraded and very low yield of extracted DNA and the presence of PCR inhibitors. Herein, we compared several silica-based DNA extraction methods from artificially degraded DNA, DNA with PCR inhibitors and DNA from old skeletal remains using quantitative real-time PCR. We present a modified large-scale silica-based extraction combined with complete demineralization, that enables maximum DNA recovery and efficient elimination of PCR inhibitors. This is performed with high concentration of EDTA solution for demineralization of bone powder followed by QIAamp^® spin columns and buffers from the QIAquick^® PCR purification kit. We have successfully used this modified technique to perform STR analysis for 55-year-old skeletal remains. The results of this study will contribute to solve the forensic cases dealing with skeletal remains.     

Developmental validation of the PowerPlex ESX 16 and PowerPlex ESX 17 Systems

We describe the developmental validation study performed on the PowerPlex^® ESX 16 (European Standard Extended 16) and the PowerPlex^® ESX 17 Systems, part of a suite of four new DNA profiling kits developed by Promega in response to the ENFSI and EDNAP groups’ call for new STR multiplexes for Europe. The PowerPlex^® ESX 16 System combines the 11 loci compatible with the UK National DNA Database, contained within the AmpFlSTR^® SGM Plus^® PCR Amplification Kit, with five additional loci: D2S441, D10S1248, D22S1045, D1S1656 and D12S391. The multiplex was designed to incorporate these five new loci as mini- and midi-STRs while maintaining the loci found in the AmpFlSTR^® SGM Plus^® kit as standard size. The PowerPlex^® ESX 17 System amplifies the same loci as the PowerPlex^® ESX 16 System, but with the addition of a primer pair for the SE33 locus. Tests were designed to address the developmental validation guidelines issued by the Scientific Working Group on DNA Analysis Methods (SWGDAM), and those of the DNA Advisory Board (DAB). Samples processed include DNA mixtures, PCR reactions spiked with inhibitors, a sensitivity series, and 306 United Kingdom donor samples to determine concordance with data generated with the AmpFlSTR^® SGM Plus^® kit. Allele frequencies from 242 white Caucasian samples collected in the United Kingdom are also presented. The PowerPlex^® ESX 16 and ESX 17 Systems are robust and sensitive tools, suitable for the analysis of forensic DNA samples. Full profiles were routinely observed with 62.5 pg of a fully heterozygous single source DNA template. In mixture analysis, a range of 52-95% of unique minor contributor alleles was observed at 19:1 mixture ratios where only 25 pg of the minor component was present. Improved sensitivity combined with the robustness afforded by smaller amplicons has substantially improved the quantity of information obtained from degraded samples, and the improved chemistry confers exceptional tolerance to high levels of laboratory prepared inhibitors.     

Optimization of recovery of human DNA from envelope flaps using DNA IQ™ System for STR genotyping

An optimized protocol based on the DNA IQ™ System has been tested for the extraction of DNA from envelope flaps. DNA is extracted directly without the need for opening and swabbing the flaps. The method is repeatable with <10% R.S.D. (relative standard deviation). The results of a systematic study show that it is an equilibrium extraction, and a small sample volume as well as high lysis buffer content in sample contribute to high extraction efficiency. The extracted DNA requires no further purification steps following its extraction with the DNA IQ™ System. Complete but skewed 15-locus short tandem repeat (STR) profiles, which is typical of degraded of DNA, have been generated from the DNA extracted from 6 to 9 years old casework envelope samples.     

An Investigation into Whether or Not the Class and Individual Characteristics of Five Turkish Manufactured Pistols Change During Extensive Firing

Abstract:  In order to assess whether or not the class and individual characteristics of a firearm change over time, five different makes of Turkish self-loading pistol were tested and were each fired a large number of times. The class and individual characteristics were identified for each pistol and the first fired cartridge case was compared with the subsequent consecutive 250th fired cases for each pistol. It was found that there were slight changes in some of the individual and class characteristics; however, this was not statistically significant and did not affect the ability of the firearms examiner to match the first fired case to the last fired case for each firearm tested.     

DNA typing from skeletal remains using GlobalFiler™ PCR amplification and Investigator® 24plex QS kits

Since the beginning of our work in 2003 our laboratory has focused exclusively on STR DNA from bone, a powerful tool in missing person cases. In cases such as mass disasters or missing persons, human remains are challenging to identify as they may be fragmented, burnt, recovered from water, degraded, and/or contain inhibitory substances. To address these challenges, this study has evaluated the performance of relatively new STR kits Investigator® 24plex QS kit (Qiagen) and GlobalFiler™ PCR Amplification kit (Thermo Fisher Scientific) by comparing it with current uses of the AmpFLSTR® Identifiler® Plus kit (Applied Biosystems) to obtain genetic information from skeletal remains. We analyzed 20 bone samples of skeletal remains from routine casework submitted for body identifications by law enforcement corresponding using Investigator® 24plex QS kit and GlobalFiler™ PCR Amplification kit, previously analysed AmpFLSTR® Identifiler® Plus kit (Thermo Fisher Scientific). The data indicates that the STR profiles obtained using the GlobalFiler™ and Investigator® 24plex QS kit for analysis of skeletal remains has shown results in an increased number of reportable genetic loci, and provide greater power of discrimination in comparison to the Identifiler® Plus Kit. Advanced extraction and purification techniques, together with more sensitive and robust new amplification kits allowed us to overcome the challenges associated with processing compromised skeletal remains and ultimately obtain full STR DNA profiles in 99% of the bones.     

Reduction of Powerplex® Y23 Reaction Volume for Genotyping Buccal Cell Samples on FTATM Cards

PowerPlex^® Y23 is a novel kit for Y‐STR typing that includes new highly discriminating loci. The Israel DNA Database laboratory has recently adopted it for routine Y‐STR analysis. This study examined PCR amplification from 1.2‐mm FTA punch in reduced volumes of 5 and 10 μL. Direct amplification and washing of the FTA punches were examined in different PCR cycle numbers. One short robotically performed wash was found to improve the quality and the percent of profiles obtained. The optimal PCR cycle number was determined for 5 and 10 μL reaction volumes. The percent of obtained profiles, color balance, and reproducibility were examined. High‐quality profiles were achieved in 90% and 88% of the samples amplified in 5 and 10 μL, respectively, in the first attempt. Volume reduction to 5 μL has a vast economic impact especially for DNA database laboratories.     

2005式9mm警用转轮手枪射击弹壳痕迹研究

目的 研究2005式9mm警用转轮手枪射击弹壳痕迹,为警用转轮手枪射击弹壳痕迹检验鉴定提供理论依据.方法 预实验中选取10把警用转轮手枪以单动、联动方式分别射击收取弹壳样本,观察识别射击弹壳上各个痕迹的位置、形态及相互关系;补充验证实验中选取其中5把警用转轮手枪以单动方式分别进行射击实验,完善、验证预实验中得出的结论.结果警用转轮手枪射击弹壳上的烟垢痕迹、弹底窝痕迹及击针头痕迹的分布位置、形态具有规律性,具备检验鉴定价值.结论 利用弹底窝痕迹、烟垢痕迹结合击针头痕迹,可以实现射击弹壳的准确定位;利用烟垢痕迹、弹底窝痕迹及击针头痕迹具有推定弹壳先后射击顺序的可能性;通过弹底窝痕迹、击针头痕迹的细节特征比对,可以实现射击枪支的同一认定.     

FaSTR DNA: A new expert system for forensic DNA analysis

The automation of DNA profile analysis of reference and crime samples continues to gain pace driven in part by a realisation by the criminal justice system of the positive impact DNA technology can have in aiding in the solution of crime and the apprehension of suspects. Expert systems to automate the profile analysis component of the process are beginning to be developed. In this paper, we report the validation of a new expert system FaSTR DNA, an expert system suitable for the analysis of DNA profiles from single source reference samples and from crime samples. We compare the performance of FaSTR DNA with that of other equivalent systems, GeneMapper™ ID v3.2 (Applied Biosystems, Foster City, CA) and FSS-i³ v4 (The Forensic Science Service^® DNA expert System Suite FSS-i³, Forensic Science Service, Birmingham, UK) with GeneScan^® Analysis v3.7/Genotyper^® v3.7 software (Applied Biosystems, Foster City, CA, USA) with manual review. We have shown that FaSTR DNA provides an alternative solution to automating DNA profile analysis and is appropriate for implementation into forensic laboratories. The FaSTR DNA system was demonstrated to be comparable in performance to that of GeneMapper™ ID v3.2 and superior to that of FSS-i³ v4 for the analysis of DNA profiles from crime samples.     

Statistical Approaches to Type Determination of the Ejector Marks on Cartridge Cases

While type determination on bullets has been performed for over a century, type determination on cartridge cases is often overlooked. Presented here is an example of type determination of ejector marks on cartridge cases from Glock and Smith & Wesson Sigma series pistols using Naïve Bayes and Random Forest classification methods. The shapes of ejector marks were captured from images of test‐fired cartridge cases and subjected to multivariate analysis. Naïve Bayes and Random Forest methods were used to assign the ejector shapes to the correct class of firearm with success rates as high as 98%. This method is easily implemented with equipment already available in crime laboratories and can serve as an investigative lead in the form of a list of firearms that could have fired the evidence. Paired with the FBI's General Rifling Characteristics (GRC) database, this could be an invaluable resource for firearm evidence at crime scenes.     

Classification of firing pin impressions using HOG-SVM

Crimes, such as robbery and murder, often involve firearms. In order to assist with the investigation into the crime, firearm examiners are asked to determine whether cartridge cases found at a crime scene had been fired from a suspect's firearm. This examination is based on a comparison of the marks left on the surfaces of cartridge cases. Firing pin impressions can be one of the most commonly used of these marks. In this study, a total of nine Ruger model 10/22 semiautomatic rifles were used. Fifty cartridges were fired from each rifle. The cartridge cases were collected, and each firing pin impression was then cast and photographed using a comparison microscope. In this paper, we will describe how one may use a computer vision algorithm, the Histogram of Orientated Gradient (HOG), and a machine learning method, Support Vector Machines (SVMs), to classify images of firing pin impressions. Our method achieved a reasonably high accuracy at 93%. This can be used to associate a firearm with a cartridge case recovered from a scene. We also compared our method with other feature extraction algorithms. The comparison results showed that the HOG-SVM method had the highest performance in this classification task.