Chemical enhancement of soil based footwear impressions on fabric

This study investigates the enhancement of footwear impressions prepared with soils from different locations on a variety of fabric surfaces with different morphology. Preliminary experiments using seventeen techniques were carried out and the best responding reagents were evaluated further. Results indicated that the soils investigated (a cross-section of soils from Scotland) are more likely to respond to reagents that target iron ions rather than calcium, aluminium or phosphorus ions. Furthermore, the concentration of iron and soil pH did not appear to have an effect on the performance of the enhancement techniques. For the techniques tested, colour enhancement was observed on all light coloured substrates while enhancement on dark coloured fabrics, denim and leatherette was limited due to poor contrast with the background. Of the chemical enhancement reagents tested, 2,2'-dipyridil was a suitable replacement for the more common enhancement technique using potassium thiocyanate. The main advantages are the use of less toxic and flammable solvents and improved clarity and sharpness of the enhanced impression. The surface morphology of the fabrics did not have a significant effect on the enhancement ability of the reagents apart from a slight tendency for diffusion to occur on less porous fabrics such as polyester and nylon/lycra blends.     

Chemical enhancement of footwear impressions in blood on fabric — Part 2: Peroxidase reagents

This study investigates the optimisation of peroxidase based enhancement techniques for footwear impressions made in blood on various fabric surfaces. Four different haem reagents: leuco crystal violet (LCV), leuco malachite green (LMG), fluorescein and luminol were used to enhance the blood contaminated impressions.The enhancement techniques in this study were used successfully to enhance the impressions in blood on light coloured surfaces, however, only fluorescent and/or chemiluminescent techniques allowed visualisation on dark coloured fabrics, denim and leather. Luminol was the only technique to enhance footwear impressions made in blood on all the fabrics investigated in this study.     

Chemical enhancement of footwear impressions in blood on fabric – Part 1: Protein stains

A range of protein stains were utilised for the enhancement of footwear impressions on a variety of fabric types of different colours with blood as a contaminant. A semi-automated stamping device was used to deliver test impressions at a set force to minimise the variability between impressions; multiple impressions were produced and enhanced by each reagent to determine the repeatability of the enhancement. Results indicated that while most protein stains used in this study successfully enhanced impressions in blood on light coloured fabrics, background staining caused interference on natural fabrics. Enhancement on dark coloured fabrics was only achieved using fluorescent protein stains, as non-fluorescent protein stains provided poor contrast.A further comparison was performed with commercially available protein staining solutions and solutions prepared within the laboratory from the appropriate chemicals. Both solutions performed equally well, though it is recommended to use freshly prepared solutions whenever possible.     

Chemical enhancement of footwear impressions in blood on fabric — Part 3: Amino acid staining

Enhancement of footwear impressions, using ninhydrin or ninhydrin analogues is not considered common practice and such techniques are generally used to target amino acids present in fingermarks where the reaction gives rise to colour and possibly fluorescence. Ninhydrin and two of its analogues were used for the enhancement of footwear impressions in blood on various types, colours and porosities of fabric. Test footwear impressions on fabric were prepared using a specifically built rig to minimise the variability between each impression. Ninhydrin enhancement of footwear impressions in blood on light coloured fabric yielded good enhancement results, however the contrast was weak or non-existent on dark coloured fabrics. Other ninhydrin analogues which have the advantage of fluorescence failed to enhance the impressions in blood on all fabrics. The sequential treatment of impressions in blood on fabric with other blood enhancing reagents (e.g. protein stains and heme reagents) was also investigated.     

Lifting Bloody Footwear Impressions Using Alginate Casts Followed by Chemical Enhancement

A method for lifting bloody footwear impressions using alginate casts and enhancing the lifted impressions with amido black is presented. On rough or dark substrates, background interferences may conceal significant details of footwear impressions. Illumination with alternative light sources and chemically enhancing the bloody footwear impressions may reveal additional details, but sometimes, lifting footwear impressions prior to enhancing is the only way to expose hidden details (by using blood reagents not adequate on the original). Several cast formulations were tested for lifting the footwear impressions. The best results were achieved using Aroma fine^®. Enhancement of the footwear impressions was attempted with several reagents prior to lifting, during the casting process, and on the lifted footwear impressions. Applying amido black to footwear impressions lifted with alginate produced the sharpest and most detailed footwear impressions. Alginate castings followed by chemical enhancement with amido black may produce high‐quality footwear impressions for comparison.     

Chemical enhancement of footwear impressions in urine on fabric

A range of chemical techniques were utilised for the enhancement of footwear impressions deposited on a variety of fabric types of different colours with urine as a contaminant. A semi-automated stamping device was used to deliver test impressions at a set force to minimise the variability between impressions; multiple impressions were produced and enhanced by each reagent to determine the repeatability of the enhancement. Urine samples from different donors were analysed using a spectrofluorophotometer revealing differences between individuals. Results indicated that the enhancement of footwear impressions in urine was possible using amino acid staining techniques whereas protein stains failed to achieve successful enhancement.     

平面扫描技术在尿渍鞋印提取中的应用研究

目的应用平面扫描技术建立尿渍鞋印的光学无损提取方法。方法通过调整光源入射角度和反射光接收角度等参数,运用3种平面扫描方法提取大理石、地板革和瓷砖等6种客体上遗留的尿渍鞋印。结果基于平面扫描技术的尿渍鞋印提取方法,显著增加了痕迹与承痕客体之间的亮度反差,消除或减弱承痕客体背景干扰。比较筛选得到了大理石、地板革和瓷砖等客体上尿渍鞋印的最佳平面扫描方法。结论平面扫描方法可作为一种光学无损方法用于尿渍鞋印的提取。     

荧光钙血迹蓝钠试剂增强潜在多介质混合鞋印的应用

目的研究荧光钙血迹蓝钠试剂增强潜在灰尘水渍混合鞋印、灰尘尿渍混合鞋印、灰尘血渍混合鞋印的普适性。方法采用高压微雾雾化法,雾化增强常见的8种地板上的20%w/w灰尘含量的灰尘水渍、灰尘尿渍和灰尘血渍混合鞋印,并与平面扫描提取技术相比较。结果增强后的鞋印花纹清晰,呈亮蓝色,提取效果明显优于自然光下拍照提取,略优于平面扫描提取技术。结论荧光钙血迹蓝钠试剂能够有效增强潜在多介质混合鞋印,是一种便捷高效的潜在混合鞋印增强提取方法。     

Controlling the variable of pressure in the production of test footwear impressions

Footwear impression lifting and enhancement techniques may be affected by several variables introduced during the production of test footwear impressions, thus limiting the usefulness of enhancement technique comparisons and the results obtained. One such variable is the force applied when the impressed mark is being made. Producing consistent test impressions for research into footwear enhancement techniques would therefore be beneficial. This study was designed to control pressure in the production of test footwear impressions when mimicking a stamping action. Twenty-seven volunteers were asked to stamp on two different surfaces and the average stamping force was recorded. Information from the data obtained was used to design and build a mechanical device which could be calibrated to consistently deliver footwear impressions with the same force onto a receiving surface. Preliminary experiments using this device and different contaminants on the footwear sole have yielded consistent and repeatable impressions. Controlling the variable of pressure for the production of test impressions in this study demonstrated that the differences observed were visual (due to the amount of contaminant transferred and subsequent enhancement) and did not affect the replication of outer sole characteristics. This paper reports the development of the device and illustrates the quality of the impressions produced.     

Background correction in forensic photography. II. Photography of blood under conditions of non-uniform illumination or variable substrate color--practical aspects and limitations

The combination of photographs taken at wavelengths at and bracketing the peak of a narrow absorbance band can lead to enhanced visualization of the substance causing the narrow absorbance band. This concept can be used to detect putative bloodstains by division of a linear photographic image taken at or near 415 nm with an image obtained by averaging linear photographs taken at or near 395 and 435 nm. Nonlinear images can also be background corrected by substituting subtraction for the division. This paper details experimental applications and limitations of this technique, including wavelength selection of the illuminant and at the camera. Characterization of a digital camera to be used in such a study is also detailed. Detection limits for blood using the three wavelength correction method under optimum conditions have been determined to be as low as 1 in 900 dilution, although on strongly patterned substrates blood diluted more than twenty-fold is difficult to detect. Use of only the 435 nm photograph to estimate the background in the 415 nm image lead to a twofold improvement in detection limit on unpatterned substrates compared with the three wavelength method with the particular camera and lighting system used, but it gave poorer background correction on patterned substrates.     

Enhancement of footwear impressions in blood

Methods for chemical enhancement of footwear impressions in blood were compared in order to make a separation between utilization at the scene of crime, the local (regional) police laboratory and the Dutch Forensic Science Laboratory (DFSL).     

Chemical enhancement of footwear impressions in blood deposited on fabric — Evaluating the use of alginate casting materials followed by chemical enhancement

Most footwear marks made in blood on a surface such as fabric tend to be enhanced in situ rather than physically recovered using a lifting technique prior to enhancement. This work reports on the use of an alginate material to recover the impressed footwear marks made in blood and deposited on a range of fabric types and colours. The lifted marks were then enhanced using acid black 1 and leuco crystal violet with excellent results.This presents a new method for the lifting and recovery of blood impressions in situ from crime scene followed by subsequent mark enhancement of the lifted impression.     

A preliminary investigation into the use of alginates for the lifting and enhancement of fingermarks in blood

Recent studies have reported the use of alginate in the lifting and subsequent enhancement of footwear marks in blood. A study was set up to assess the use of such a method in the treatment of fingermarks in blood on a variety of porous, non-porous and semi-porous surfaces. Other variables included ageing of the fingermarks in blood and the application of chemicals prior to or post-alginate lifting. All different variations were compared to direct chemical treatment of the substrate. The results demonstrated that alginate is not compatible with certain substrates (e.g. glass and tile). On substrates that were compatible with alginate (e.g. fabric and paper), the enhanced fingermarks on the alginate cast and the enhanced fingermarks on the post-alginate substrates appeared, overall, inferior compared to direct chemical enhancement without the use of alginate. A further variation using water-based protein stains directly mixed with the alginate appeared to provide enhancement directly on the substrate as well as simultaneous lifting and enhancing the fingermarks in blood on the alginate cast.     

A Comparison of Various Fixatives for Casting Footwear Impressions in Sand at Crime Scenes

Footwear examination can provide an important link between the crime scene and the suspect. Casts have been taken from snow, soil, and sand substrates to assist with the examination and to accurately depict the impression. However, there has been some discrepancy on what kind of fixative, if any, should be used with impressions present in sand. This study tested four different fixatives on three sandy substrates. Eight gross characteristics were added to a boot sole, and thirty sand impressions were created in each substrate. Except for one control set that remained untreated, the impressions were treated with a fixative agent before casting. The ninety shoe casts were examined by a qualified footwear examiner and scored based on his ability to see the eight characteristics. The results indicated that pump‐action hairspray was the most successful on play and construction sand, while beach sand impressions without any fixative scored highest.     

Enhancement of muddy footwear impressions

Methods for chemical enhancement of muddy footwear impressions were compared in order to differentiate between utilisation at the scene of crime, the local (regional) police laboratory and the Netherlands Forensic Institute (NFI)     

3D documentation of footwear impressions and tyre tracks in snow with high resolution optical surface scanning

The three-dimensional documentation of footwear and tyre impressions in snow offers an opportunity to capture additional fine detail for the identification as present photographs. For this approach, up to now, different casting methods have been used. Casting of footwear impressions in snow has always been a difficult assignment. This work demonstrates that for the three-dimensional documentation of impressions in snow the non-destructive method of 3D optical surface scanning is suitable. The new method delivers more detailed results of higher accuracy than the conventional casting techniques. The results of this easy to use and mobile 3D optical surface scanner were very satisfactory in different meteorological and snow conditions. The method is also suitable for impressions in soil, sand or other materials. In addition to the side by side comparison, the automatic comparison of the 3D models and the computation of deviations and accuracy of the data simplify the examination and delivers objective and secure results. The results can be visualized efficiently. Data exchange between investigating authorities at a national or an international level can be achieved easily with electronic data carriers.     

Photoluminescence of blood by acidic hydrogen peroxide—A preliminary test

In this study, the authors found that treating blood with 1 M HCl and 2% (w/v) 5-sulfosalicylic acid (SSA) in 1% (v/v) hydrogen peroxide mixture can produce photoluminescence of blood. SSA was added as a blood fixer. The photoluminescence was induced by irradiation of a forensic light source at 505 nm, which was detected using a 550 nm barrier filter. In this experiment, various level of acid and hydrogen peroxide were tested to find the optimal formulation of reagents, spot tests were conducted with diluted blood to test the sensitivity of this reagent, and impressions in blood left on porous/nonporous surfaces were enhanced. The sensitivity of this solution was slightly lower than Bluestar and was similar to leucocrystal violet or leucomalachite green on both porous/non-porous surfaces. The photoluminescence of blood treated with this reagent has been observed over 2 months. Using this reagent, it was possible to observe fingermarks or footwear impressions in blood on a black porous/non-porous surface. Through this, it was found that using this reagent could enhance bloodstains regardless of the porosity or color of the surface.     

A method for impregnating nylon transfer membranes with leucocrystal violet for enhancing and lifting bloody impressions

The objective of this research project was to demonstrate a quick and easy method for impregnating nylon transfer membranes with leucocrystal violet (LCV) for the purpose of lifting and enhancing impressions made in blood. A stamp that would simulate fine detail found in fingerprints or footwear was used to create impressions on a variety of substrates. Four different LCV formulations were tested to determine the effectiveness of the prepared membranes in lifting and enhancing the impressions. Further investigation involved the feasibility of using the LCV membranes in the field by studying the shelf life and storage of the impregnated membranes and the longevity of the lifted impressions. One of the formations studied demonstrated superior lifting and enhancing capabilities, as well as a prolonged shelf life and a resilience of the lifted impressions, thus proving LCV to be an extremely valuable technique.     

The effect of mark enhancement techniques on the presumptive and confirmatory tests for blood

An investigation into the effects of physical and chemical enhancement on subsequent presumptive and confirmatory tests for human blood is presented. Human blood was deposited onto porous (white 80 gsm paper and brown envelope) and non-porous (tile and linoleum) substrates in a depletion series (30 depletions on non-porous and 20 on porous) and subjected to three ageing periods; 1, 7 and 28?days. A number of enhancement techniques were tested [fluorescence, black magnetic powder (BMP), iron-oxide black powder suspension (PS), cyanoacrylate (CA) fuming, acid violet 17 (AV17), acid yellow 7 (AY7), ninhydrin, DFO and Bluestar Forensic Magnum (BFM) luminol] to evaluate their potential effects on subsequent presumptive and confirmatory tests. AV17 and Bluestar provided the best enhancement and fully enhanced all depletions in the series. The sensitivity of the Kastle-Meyer (KM) (presumptive), Takayama and RSID-Blood tests (confirmatory) was initially investigated to determine the range of detectable depletions. The KM test detected all depletions, whereas the Takayama test detected up to depletion 6 and RSID-Blood detected up to depletion 20 (paper), 10 (envelope), 15 (tile) and 9 (lino). The abilities of these tests to detect blood after enhancement were then observed.A number of techniques resulted in little to no effect on any of the blood tests, whereas adverse effects were observed for others. Ninhydrin and CA fuming caused weak but instantaneous positive KM results whereas methanol-based AV17 and AY7 delayed the reaction by as much as 1?min. The Takayama test was not very sensitive, therefore, its performance was easily affected by enhancement and negative results were often observed. RSID-Blood tests were largely unaffected by chemical enhancement although a drop in positive results was observed for some of the techniques when compared to positive controls.Using a standard procedure for DNA extraction, all the tested blood samples (before and after enhancement) gave a detectable quantity of DNA and were successfully profiled. Out of the 45 samples processed for DNA profiling, 41 gave full profiles, while the remaining showed allele drop out in one or two loci.