Effect of Temperature on Six Different Developmental Landmarks within the Pupal Stage of the Forensically Important Blowfly Calliphora vicina (Robineau‐Desvoidy) (Diptera: Calliphoridae)

This study investigates the pupal development times of the blow fly Calliphora vicina, which were studied in the laboratory at six different constant temperatures (15, 20, 23, 25, 28, and 30°C each ± 1°C). Lower thresholds (t_L) for development were estimated from the linear regression of the developmental rates on each temperature. These data have made it possible to calculate the accumulated degree days (ADD) necessary for C. vicina to complete the larval stage and to achieve adult emergence. The minimal duration of development from oviposition to adult emergence was found to be inversely related to temperature. Additionally, six landmarks in pupal development are showed, and for each of the landmarks, the ADD value was calculated for every rearing temperature involved. These data assist in calculating the duration of the pupal stage based on morphological characteristics and would be of great value for future forensic entomological casework.     

A Forensic Entomological Analysis Can Yield an Estimate of Postmortem Interval,and Not Just a Minimum Postmortem Interval: An Explanation and Illustration Using a Case

Several authors claimed that a forensic entomological analysis can never be interpreted as the postmortem interval (PMI), but that it can be interpreted as a minimum postmortem interval (PMI_min), or dead for not less than X amount of time. Because in most instances, a PMI estimate should be a range, that is, the set of values from maximum postmortem interval (PMI_max) to PMI_min, objections to PMI estimation are objections to PMI_max estimation. The arguments for this position did not address the substantial body of literature describing estimation of both PMI_max and PMI_min using insect succession analysis. This report reviews the scientific issues and presents a recent homicide investigation in which several forensic entomology experts used the absence of carrion insects on the corpse, a kind of succession analysis, to estimate PMI or PMI_max.     

Variation in decomposition stages and carrion insect succession in a dry tropical climate and its effect on estimating postmortem interval

Insects have an important role in minimum postmortem interval (PMI_min) estimation. An accurate PMI_min estimation relies on a comprehensive study of the development and succession of local carrion insects. No published research on carrion insect succession exists for tropical north Queensland. To address this, we aimed to obtain preliminary observational data concerning the rate of decomposition and insect succession on pig carcasses in Townsville and compare these with other regions of Australia and overseas. Adult insects were collected daily from three pig carcasses for 30 d during summer and identified to family level. Observations of decomposition rate were made each day and progression through the stages of decomposition were recorded. Adult insects were identified to family and their presence/absence used as a proxy for arrival at/departure from the remains, respectively. These preliminary data highlight several interesting trends that may be informative for forensic PMI_min estimation. Decomposition was rapid: all carcasses were at the dry/remains stage by Day 5, which was substantially quicker than all other regions in the comparison. Differences were also observed in the presence/absence of insect families and their arrival and departure times. Given the rapid progression through early decomposition, we argue that later-arriving coleopteran taxa may be more forensically informative in tropical Australia, in contrast with temperate regions where Diptera appear most useful. This research contributes preliminary observational data to understanding insect succession patterns in tropical Australia and demonstrates the critical need for comprehensive local succession data for each climatic region of Australia to enable accurate PMI_min estimation. These data will inform future research targeted at gaining a more comprehensive understanding of insect succession in the Australian tropics.

Key points:

• We obtained preliminary observational data concerning the rate of decomposition and insect succession on pig carcasses in tropical Australia.
• Decomposition was rapid: all carcasses were at the dry/remains stage by Day 5.
• Coleopteran taxa may be more forensically informative in tropical Australia than dipterans.

     

Effects of Different Temperatures on the Development of Dermestes Frischii and Dermestes Undulatus (Coleoptera,Dermestidae): Comparison Between Species

Dermestidae could be useful in forensic investigations to assess the PMI as adults and larvae colonize dried remains. We reared two species of Dermestidae (Dermestes frischii and Dermestes undulatus) to understand the effects of different temperatures on the length of their whole life cycle and on their immature stages. Both species were reared at 23°C ± 0.5, RH 75% and at 26°C ± 0.5, 75% RH. Our result shows that the temperature is the main factor that influences the development of those species; in fact, increasing temperature leads to a shorter development cycle (59.8 ± 0.5 and 38.1 ± 0.2 for D. frischii; 50.6 ± 0.6 and 36.2 ± 0.2 for D. undulatus). Furthermore, we found that the number of the molts before the pupa decreases from 5–7 to 5–6 for D. frischii and from 4–6 to 4–5 for D. undulatus, respectively, at 23°C and 26°C.     

Developmental Times of Chrysomya megacephala (Fabricius) (Diptera: Calliphoridae) at Constant Temperatures and Applications in Forensic Entomology

The characteristic life stages of infesting blowflies (Calliphoridae) such as Chrysomya megacephala (Fabricius) are powerful evidence for estimating the death time of a corpse, but an established reference of developmental times for local blowfly species is required. We determined the developmental rates of C. megacephala from southwest China at seven constant temperatures (16–34°C). Isomegalen and isomorphen diagrams were constructed based on the larval length and time for each developmental event (first ecdysis, second ecdysis, wandering, pupariation, and eclosion), at each temperature. A thermal summation model was constructed by estimating the developmental threshold temperature D₀ and the thermal summation constant K. The thermal summation model indicated that, for complete development from egg hatching to eclosion, D₀ = 9.07 ± 0.54°C and K = 3991.07 ± 187.26 h °C. This reference can increase the accuracy of estimations of postmortem intervals in China by predicting the growth of C. megacephala.     

The Effect of Soft Tissue on Temperature Estimation from Burnt Bone Using Fourier Transform Infrared Spectroscopy

This study investigated the effect of soft tissue and different exposure times on the prediction of burning temperatures of bone when using Fourier transform infrared spectroscopy (FTIR). Ovis aries rib bones were burnt at different temperatures and for varying time intervals. Results of a linear regression analysis indicated that burn temperatures can be predicted with a standard error of ±70°C from defleshed bone spectra. Exposure time does not have a significant impact on prediction accuracy. The presence of soft tissue has a significant impact on heat‐induced changes of the bone matrix in low (<300°C) as well as high temperatures (>800°C), slowing down combustion in the former and accelerating it in the latter (p < 0.05). At medium temperatures, no significant difference was noted. These results provide forensic investigators a new perspective with which to interpret the results of crystallinity measures derived from burnt bone.     

Cuticular hydrocarbons as a tool for determining the age of Chrysomya rufifacies (Diptera: Calliphoridae) larvae

Calliphoridae are one of the most important insect groups encountered as evidence collected from a crime scene. Age determination of the immature stages of these necrophagous flies is an important step toward estimating the time of colonization and inferring a minimum postmortem interval (PMI_min) in most instances. To determine if the cuticular hydrocarbons could be used to establish whether the development stages yield characteristics profiles, allowing for age estimation, hydrocarbons were extracted from 1st and 2nd, as well as feeding and post‐feeding 3rd instar Chrysomya rufifacies, the hairy maggot blow fly. Extracted hydrocarbons were analyzed using gas chromatography coupled to mass spectrometry with the aim to investigate the changes in chemical profiles of each larval stage. A total of 23 compounds were identified with most of them being alkanes (65%) with carbon chain lengths of 9–33 carbons, alkenes (18%), and methyl‐branched alkanes (17%). All the hydrocarbons except pentadecane (C15), hexadecane (C16), and nonacosane (C29) showed significant differences in their expression throughout larval development. For 1st instars, nonane was the most abundant (17% of the total hydrocarbons content) compound. Accounting for 11% and 10% of the cuticular hydrocarbons, tricosane and pentacosane, respectively, were the notable hydrocarbons in 2nd instars. For post‐feeding 3rd instars, hentriacontane and tritriacontane were present with relative abundances 18% and 15%, respectively. On average, there was a shift from low to high molecular weight hydrocarbons as the larvae aged. These results indicate the change in hydrocarbons makeup as larvae age and could potentially be used to determine the age of immature C. rufifacies and hence aid in PMI_min estimations. However, future research is needed to validate these results under natural conditions in the field.     

Tracking Movement and Temperature Selection of Larvae of Two Forensically Important Blow Fly Species Within a “Maggot Mass”

The current study responds to the lack of understanding about the temperatures experienced by individual blow fly larvae within “maggot masses.” The temperature selection of both aggregating (in a mass) and nonaggregating larvae was compared and their pattern of movement assessed. Infrared imaging determined the temperatures within a mass and in the vicinity of the constituent individual larvae, whose movements were tracked by dyeing their tissues red. Individual Chrysomya rufifacies larvae selected temperatures above 27°C, significantly higher than the temperature selected by Calliphora vicina larvae (24.5°C). However, this same difference was not seen within a mass, with both species selecting temperatures around 28°C. Larval movement in a mass was nonrandom, indicating that larvae actively select their position in a mass. Furthermore, larvae have a strong tendency to select the hottest part of a mass; therefore, maximum mass temperatures might provide a reliable proxy for the actual temperatures experienced by larvae.     

Detection and Identification of Psilocybe cubensis DNA Using a Real‐Time Polymerase Chain Reaction High Resolution Melt Assay,

Psilocybe cubensis, or “magic mushroom,” is the most common species of fungus with psychedelic characteristics. Two primer sets were designed to target Psilocybe DNA using web‐based software and NBCI gene sequences. DNA was extracted from eighteen samples, including twelve mushroom species, using the Qiagen DNeasy^® Plant Mini Kit. The DNA was amplified by the polymerase chain reaction (PCR) using the primers and a master mix containing either a SYBR^® Green I, Radiant? Green, or LCGreen Plus^® intercalating dye; amplicon size was determined using agarose gel electrophoresis. The PCR assays were tested for amplifiability, specificity, reproducibility, robustness, sensitivity, and multiplexing with primers that target marijuana. The observed high resolution melt (HRM) temperatures for primer sets 1 and 7 were 78.85 ± 0.31°C and 73.22 ± 0.61°C, respectively, using SYBR^® Green I dye and 81.67 ± 0.06°C and 76.04 ± 0.11°C, respectively, using Radiant? Green dye.     

Internal Morphological Analysis for Age Estimation of Blow Fly Pupae (Diptera: Calliphoridae) in Postmortem Interval Estimation*

Abstract: Larvae and pupae of blow fly species are frequently used in postmortem interval estimation, their age indicating minimum time since death. Most studies have considered age estimation of larvae, neglecting study of pupae. Relative development of external pupal features is useful, but there are also internal changes during metamorphosis that may be indicators of age, utilizing histological techniques. This study aimed to optimize preservation and histological analysis of blow fly pupae, specifically Calliphora vicina Robineau‐Desvoidy and Lucilia sericata (Meigen), and to examine internal features with potential for age estimation. Effect of hot‐water‐killing and different preservatives were examined. It was determined that blow fly pupae should be pierced through the three tagma, hot‐water‐killed, and preserved in 80% ethanol as the optimal preservation for subsequent analyses. Hematoxylin and eosin stained pupal sections revealed differences in brain and thoracic muscle development throughout the pupal stage with potential for age estimation.     

Development of a PCR High‐Resolution Melt Assay for Artemisia absinthium (Wormwood) and a Triplex Assay with Two Additional “Unregulated Legal High” Species Datura stramonium (Jimson Weed) and Merremia tuberosa (Hawaiian Woodrose),

Artemisia absinthium (wormwood), a common ingredient in absinthe, contains the compound thujone, which is unregulated by the U.S. Drug Enforcement Agency. Thujone can cause an “unregulated legal high” in higher concentrations. The European Union limits thujone from Artemisia species to 35 mg/kg while the U.S. Food and Drug Administration requires less than 10 ppm to be “thujone‐free.” However, individuals can smoke or ingest A. absinthium in different forms. This study developed a polymerase chain reaction (PCR) high‐resolution melt (HRM) assay to detect and identify A. absinthium based on primer specificity, sensitivity, repeatability, and robustness. A triplex assay was performed with three “unregulated legal high” species: Datura stramonium, Merremia tuberosa, and A. absinthium; the PCR HRM assay detected and identified each plant at melt temperatures 77.42 ± 0.20°C, 83.88 ± 0.22°C, and 87.77 ± 0.15°C, respectively. The primer set developed distinguished A. absinthium from a variety of plant species and was successfully triplexed.     

A Study on the Estimation of Postmortem Interval Based on Environmental Temperature and Concentrations of Substance in Vitreous Humor

A method to determine postmortem interval (PMI) based on environmental temperature and the concentrations of vitreous humor (VH) molecules were explored. Rabbit carcasses were placed in a chamber at 5, 15, 25, or 35°C, and 80–100 μL of VH was collected with the double‐eye alternating micro‐sampling method every 12 h. A Roche DPPI biochemical analyzer was used to measure the concentrations of six substances in VH samples. The interpolation function model and mixed‐effect model were employed for data fitting to establish equations for PMI estimation. The concentrations of K⁺, P, Mg²⁺, creatinine (CRE), and urea nitrogen (UN) exhibited an upward trend with increasing PMI in all temperature groups, while the concentration of Ca²⁺ showed a downward trend. Validation results using K⁺ and Mg²⁺ ions revealed that the mixed‐effect model provided a better estimation than the interpolation function model using the data from our experiment. However, both models were able to estimate PMI using temperature and VH molecule concentrations.     

Effect of Temperature on the Visualization by Digital Color Mapping of Latent Fingerprint Deposits on Metal

Visualization of fingerprint deposits by digital color mapping of light reflected from the surface of heated brass, copper, aluminum, and tin has been investigated using Adobe^® Photoshop^®. Metals were heated to a range of temperatures (T) between 50°C and 500°C in 50°C intervals with enhancement being optimal when the metals are heated to 250°C, 350°C, 50°C, and 300°C, respectively, and the hue values adjusted to 247°, 245°, 5°, and 34°, respectively. Fingerprint visualization after color mapping was not degraded by subsequent washing of the metals and color mapping did not compromise the visibility of the fingerprint for all values of T. The optimum value of T for fingerprint visibility is significantly dependent of the standard reduction potential of the metal with Kendall's Tau (τ) = 0.953 (p < 0.001). For brass, this correlation is obtained when considering the standard reduction potential of zinc rather than copper.     

An investigation into the use of a portable cyanoacrylate fuming system (SUPERfume®) and aluminum powder for the development of latent fingermarks

Abstract: Few techniques offer “in situ” methods of friction ridge skin mark development. “In situ” development reduces mark transportation, degradation, and often cost. The effectiveness of cyanoacrylate fuming using the SUPERfume^® and dusting with aluminum powder for latent fingermark development on several nonporous surfaces, stored in various temperature environments for time periods up to 52 weeks, was investigated. Five thousand and four hundred latent fingermarks were deposited under controlled conditions and graded. The results suggested that cyanoacrylate fuming (SUPERfume^®, Foster and Freeman, U.K.) was more effective at developing latent fingermarks on textured and smooth plastic surfaces and for marks stored in temperatures of 37°C, whereas aluminum powder was more effective on glass, enameled metal paint, and varnished wood, and for storage temperatures below 20°C. There were no significant benefits to using either technique for marks older than 24 h, but it was possible to develop fingermarks following 52 weeks of storage using both techniques.     

Viability of Human Articular Chondrocytes Harvested Postmortem: Changes with Time and Temperature of In Vitro Culture Conditions

Different studies of long‐term chondrocytes viability have shown a gradual reduction as a function of time and ambient temperature. The aim of our in vitro study was to establish chondrocyte postmortem viability curves for 4°C, 11°C, 23°C, 35°C during 63 days after the donors' death. Osteochondral cylinders were procured from the knees of 16 male donors (20–47 years), stored in preservation media that was not changed, and analyzed in 3‐day intervals using a confocal laser scanning microscope. A significant influence of time on viability was found from Day 9 (p = 0.0029) and onwards (p < 0.0001). The lowest overall chondrocyte viability was at 35°C, followed by 4°C (p < 0.0001). The conditions used in this in vitro analysis suggest that similar viabilities may occur while in situ in the decedent. Further studies of chondrocyte viability from individuals with known postmortem intervals may show premise to help evaluate time since death in the late postmortem interval.     

Detection and Identification of Kratom (Mitragyna speciosa) and Marijuana (Cannabis sativa) by a Real-Time Polymerase Chain Reaction High-Resolution Melt Duplex Assay,

Mitragyna speciosa (MS), a plant commonly known as kratom, is a widely used “legal high” opiate alternative for pain relief. DNA extracted from MS and 26 additional plant species was amplified by PCR using primers targeting the strictosidine beta-D-glucosidase (SGD) and secologanin synthase 2 (SLS2) genes and detected by high-resolution melt curves using three intercalating dyes. Amplicon sizes were confirmed using agarose gel electrophoresis. The observed melt temperatures for SGD and SLS2 were 77.08 ± 0.38°C and 77.61 ± 0.46°C, respectively, using SYBR^® Green I; 80.18 ± 0.27°C and 80.59 ± 0.08°C, respectively, using Radiant^™ Green; and 82.19 ± 0.04°C and 82.62 ± 0.13°C, respectively, using the LCGreen^® PLUS dye. The SLS2 primers demonstrated higher specificity and identified MS DNA at 0.05 ng/μL. In a duplex reaction, SLS2 and tetrahydrocannabinoic acid synthase gene primers detected and differentiated MS and Cannabis sativa (CS) by melt peaks at 82.63 ± 0.35°C and 85.58 ± 0.23°C, respectively, using LCGreen^® PLUS.     

Variation in Developmental Time for Geographically Distinct Populations of the Common Green Bottle Fly,Lucilia sericata (Meigen)*

Abstract: Time between death and discovery of remains, or postmortem interval (PMI), can be assessed using blow fly maggot age. Forensic entomologists rely on published, often nonlocal, species‐specific developmental tables to determine maggot age. In a series of common garden experiments, we investigated the developmental rate variation between populations of Lucilia sericata collected from Sacramento, CA, San Diego, CA, and Easton, MA at 16°C, 26°C, and 36°C. For the 16°C trial the time measurement started at egg hatch, while for the higher temperatures the experiment began at oviposition; the wandering stage signified the endpoint for all experiments. The distribution of developmental times differed significantly (ANOVA, p < 0.001) between the three populations within each temperature treatment. We discovered that regional variation of developmental times within a blow fly species exists. This study demonstrates the importance of assembling local population‐specific developmental tables when estimating larval age to determine PMI.     

Color Stability of Dental Restorative Materials Submitted to Heat Sources,for Forensic Purposes

During postmortem examination of the dental arches of carbonized victims, dental restorative materials may be found. The aim of this study was to evaluate the effect of heat source action on the color stability of composite resin (CR) and glass ionomer cement (GIC) restorations, to discriminate between them and compare with antemortem dental data. Sixty bovine teeth (30 CR and 30 GIC) were prepared (6 × 6 × 2 mm) and separated into groups (n = 10). The color readouts were taken by spectrophotometer, before and after heat action (100°C, 200°C, 300°C), in an oven for 15 min. There were color alterations for all coordinates (ΔE, ΔL*, Δa* eΔb*) for both materials. GIC presented greater change. The authors concluded that it is possible to distinguish between the materials by the color changes analyzed by instrumental method, helping victim identification.     

Preliminary Study on the Effect of Heated Surfaces Upon Bloodstain Pattern Analysis

Bloodstain pattern analysis (BPA) involves the interpretation of distinct blood patterns found at crime scenes following a violent act. In this paper, we explored for the first time the effects of surface temperatures upon blood impacting a horizontal surface (steel) with its implications in BPA explored. Specific surface temperatures were explored over the range 24–250°C which relate to the four major boiling regimes of liquid media; natural convection, nucleate boiling, transition boiling, and film boiling, where a series of blood drops tests were performed at varying impact velocities. Blood was found to separate into its components at temperatures of 50°C+, displayed as temperature induced blood rings, where a single secondary and a series of further inner rings are exhibited. This consequently led to the development of a new constant expressing the decrease in spread factor (D_s/D_o) at the secondary ring.     

Quantifying the Temperature of Maggot Masses and its Relationship to Decomposition

Numerous Calliphoridae species have been observed to form larval aggregations during the feeding stage of development, resulting in localized increases in temperature. This study investigates the relationship between maggot numbers in a mass and heat generation. Single‐species aggregations (Lucilia sericata) of various sizes (50–2500 individuals) were reared in the laboratory at a constant ambient temperature of 22°C. Internal mass temperatures were recorded every 5 min throughout the feeding stage of development. Results showed that mass temperatures increased with mass numbers (p‐value < 0.001), ranging from 2.5 to 14°C above ambient. A minimum mass size of 1200 produced overall temperatures that were significantly warmer than ambient, diverging away from 22°C after c. 26 h. These results indicate that the microclimate of a mass has the potential to differ significantly from ambient, which may be influencing larval development rates and should therefore be factored into mPMI estimates to increase accuracy.