Evaluation of the one-step Lumicyano™ used in the visualisation of fingermarks on fabrics

This study consisted of three parts to evaluate the performance of Lumicyano? on a variety of fabrics. One part assessed the impact of dye percentage (8%, 9% and 10%) on visualisation of fingermark detail and luminescent brightness in split grab marks. A 9% dye produced the highest quality detail of grab impressions with least interference from background fluorescence. The second part investigated the optimal relative humidity (RH, 75–84%) for certain fabric types using Lumicyano on split, six-series depletion fingermarks. It was concluded that the recommended RH of 80% remained the ideal cyanoacrylate fuming environment. The final and third part of this study determined the impact of sequential addition of Basic Yellow 40 (BY40) on Lumicyano compared to traditional cyanoacrylate (CA) followed with BY40 application. Results from this study demonstrated that Lumicyano on its own developed fingermarks with superior quality to Lumicyano with sequential addition of BY40 or traditional cyanoacrylate followed by BY40. Inclusion of more fabrics, donors and longer ageing periods should be explored in future studies to determine what frameworks are best for certain types of fabrics.     

Evaluation of Lumicyano™ cyanoacrylate fuming process for the development of latent fingermarks on plastic carrier bags by means of a pseudo operational comparative trial

There are a number of studies discussing recent developments of a one-step fluorescent cyanoacrylate process. This study is a pseudo operational trial to compare an example of a one-step fluorescent cyanoacrylate product, Lumicyano™, with the two recommended techniques for plastic carrier bags; cyanoacrylate fuming followed by basic yellow 40 (BY40) dyeing and powder suspensions. 100 plastic carrier bags were collected from the place of work and the items were treated as found without any additional fingermark deposition. The bags were split into three and after treatment with the three techniques a comparable number of fingermarks were detected by each technique (average of 300 fingermarks). The items treated with Lumicyano™ were sequentially processed with BY40 and an additional 43 new fingermarks were detected. Lumicyano™ appears to be a suitable technique for the development of fingermarks on plastic carrier bags and it can help save lab space and time as it does not require dyeing or drying procedures. Furthermore, contrary to other one-step cyanoacrylate products, existing cyanoacrylate cabinets do not require any modification for the treatment of articles with Lumicyano™. To date, there is little peer reviewed articles in the literature on trials related to Lumicyano™ and this study aims to contribute to fill this gap.     

The optimisation of fingermark enhancement by VMD and Lumicyano™ on thermal paper

The enhancement of fingermarks on thermal paper can be challenging due to background staining caused by polar solvents used in fingermark enhancement techniques such as ninhydrin. This study explored a commercial one-step superglue fuming process, Lumicyano™, and Vacuum Metal Deposition (VMD) to develop fingermarks on this substrate and overcome this issue. Different sequential treatments involving Lumicyano™ and a combination of VMD methods were investigated with varying degrees of success with some sequences being highly sensitive. The VMD processes, however, were observed to generally be more effective at enhancing marks, whereas Lumicyano™ provided little or no benefit on this paper type. The results indicate that Lumicyano™ is only beneficial as a pre-treatment when the entire sequence of gold/zinc and silver/zinc is taken to completion. The gold/zinc and silver/zinc VMD processes were optimised on five different thermal papers, and the optimised techniques were then directly compared to determine which was more successful on each thermal paper type as a single treatment.     

Fluorescent TiO2 powders prepared using a new perylene diimide dye: applications in latent fingermark detection

A new, highly fluorescent dye was synthesised using oleylamine combined with a perylene dianhydride compound. The new dye was characterised by 1H NMR, UV-vis spectroscopy and fluorescence spectroscopy as well as quantum yield. The dye was absorbed onto titanium dioxide nanoparticles for use as a fingerprint detection powder. The new fluorescent powder was applied to latent fingermarks deposited onto different non-porous surfaces and compared with commercial fluorescent powders. The powder exhibits strong fluorescence at 650-700 nm under excitation at 505 nm. On glass surfaces, the new powder gave images showing tertiary-level detail of the fingermark ridges with almost no background development. Compared with current magnetic fluorescent powders, the new powder was slightly weaker in fluorescence intensity but produced significantly less background development, resulting in good contrast between the fingermark and the substrate.     

Preparation of Artificial Blood from the Extract of Legume Root Nodules,and the Creation of Artificial Latent Fingermarks in Blood Using Artificial Blood,

Distribution of homogeneous fingermarks in blood is essential for conducting proficiency tests in forensic science. Hence, the artificial blood was prepared using the root nodule extract of Glycine max plants. The reactivity of the artificial blood with widely used human blood detection reagents was tested. Artificial latent fingermarks in blood were printed using an inkjet cartridge case filled with artificial blood solution. The artificial latent fingermarks in blood were developed with amino acid‐sensitive reagents and could obtain development as prominent as the image of the master fingermark saved on the computer. Therefore, it has been confirmed that the extract of legume root nodules can be used as artificial blood, and the artificial blood can be used for the preparation of artificial latent fingermarks or footmarks in blood.     

The effectiveness of strong afterglow phosphor powder in the detection of fingermarks

There are numerous types of fluorescent fingermark powders or reagents used with the visualization of latent fingermarks deposited on multicolored substrate surfaces that can present a contrast problem if developed with regular fingermark powders. The developed fingermarks can show bright fluorescence upon exposure to laser, ultraviolet light and other light sources. These kinds of methods share a common concern, where surfaces and other substrates may fluoresce also. To overcome this concern, we have developed a phosphor powder which offers a strong afterglow effect which aid in the establishment of better fingermark detection. With the advent of a phosphor powder no special devices are required and the results obtained from fresh or a few days aged latent fingermarks left on: non-porous; semi-porous and also on some porous surfaces have been good. The strong afterglow effect offered by phosphor powder is also applicable for cyanoacrylate fumed fingermarks. Lift off and photography procedures of the developed fingermarks are incorporated in this paper.     

Exposing latent fingermarks on problematic metal surfaces using time of flight secondary ion mass spectroscopy

Fingermarks are a key form of physical evidence for identifying persons of interest and linking them to the scene of a crime. Visualising latent (hidden) fingermarks can be difficult and the correct choice of techniques is essential to develop and preserve any fingermarks or other (e.g. DNA) evidence that might be present. Metal surfaces (stainless steel in particular) have proven to be challenging substrates from which to reliably obtain fingermarks. This is a great cause for concern among police forces around the globe as many of the firearms, knives and other metal weapons used in violent crime are potentially valuable sources of fingermark evidence. In this study, a highly sensitive and non-destructive surface science technique called time of flight secondary ion mass spectroscopy (ToF-SIMS) was used to image fingermarks on metal surfaces. This technique was compared to a conventional superglue based fuming technique that was accompanied by a series of contrast enhancing dyes (basic yellow 40 (BY40), crystal violet (CV) and sudan black (SB)) on three different metal surfaces. The conventional techniques showed little to no evidence of fingermarks being present on the metal surfaces after a few days. However, ToF-SIMS revealed fingermarks on the same and similar substrates with an exceptional level of detail. The ToF-SIMS images demonstrated clear ridge definition as well as detail about sweat pore position and shape. All structures were found to persist for over 26?days after deposition when the samples were stored under ambient conditions.     

Application of mist to fingermark detection: Misting with high-boiling-point liquid containing p-dimethylaminocinnamaldehyde and cyanoacrylate

In order to detect latent fingerprints that could be damaged by liquid or powder reagents, non-destructive processes such as gaseous reagents have been developed. In this report, we propose the use of fine mist generated when hot vapor of high-boiling-point liquids is rapidly cooled by surrounding air for fingermark detection. Octyl acetate (OA), 2-phenoxyethanol (2PE), and methyl decanoate (MD) were found to efficiently produce mist when heated to 230°C. By combining these liquids with p-dimethylaminocinnamaldehyde (DMAC) and cyanoacrylate (CN), our team demonstrated effective fluorescence staining of cyano-treated fingermarks using DMAC/OA misting or DMAC/2PE misting, and one-step fluorescence detection of latent fingermarks without cyanoacrylate treatment using DMAC/OA/CN misting or DMAC/MD/CN misting. Fingermark fluorescence was efficiently observed by excitation with a blue LED light (max. wavelength 470 nm) equipped with an interference filter and passing through a 520 nm long-pass filter. We successfully obtained fluorescent images from fingermarks on several substrate materials using the developed misting method.     

Latent fingermark development on a range of porous substrates using ninhydrin analogs--a comparison with ninhydrin and 1,8-diazofluoren

Three relatively new reagents for developing latent fingermarks on porous substrates, 1,2-indandione (IND), 5-methylthioninhydrin (5-MTN), and lawsone, are compared with the more widely used ninhydrin and 1,8-diazofluoren (DFO). Developed latent fingermark visualization on 10 different substrates comprising colored papers, cardboard, and cellophane rather than conventional printer and writing/notepad paper is assessed using latent fingermark deposits from 48 donors. Results show improved fluorescent fingermark visualization using IND compared with DFO on a range of colored cardboards and thick white paper, thus extending the range of substrates known to yield improved visualization with IND. Adding zinc chloride to IND failed to yield any further improvement in fluorescent fingermark visualization. 5-MTN (with and without zinc chloride posttreatment) showed no improvement in visualization compared with ninhydrin and DFO although visible fingermarks were developed. Lawsone produced fluorescent visible fingermarks only with white substrates, which were inferior to those produced with DFO.     

Development of latent fingermarks on thermal paper: Preliminary investigation into use of iodine fuming

Thermal paper finds its extensive use in the modern day life and could act as a vital piece of physical evidence carrying latent fingermarks. A large number of citations are available in literature suggesting various techniques to develop these marks but all are suffering with one or the other drawbacks such as complex and cumbersome procedure, pre- or post-treatment, background coloration and efficiency to develop aged fingermarks. In present study, a very simple and novel method involving iodine fuming has been suggested to develop fingermarks which were not only permanent but also without any background coloration. The suggested method does not involve any pre- or post-treatment of the substrate and was able to develop very old fingermarks (upto >1 year). In this study an attempt has been made to explain the reaction mechanism of the process. In case of different types of thermal papers, presence of different substituents on leuco dye (lactone ring) structure resulted in development of different colored fingermarks upon reaction with iodine. Sebaceous material laden marks have been found to be more intensely developed as compared to eccrine marks, and the difference was more pronounced in case of aged fingermarks.     

Evaluation of a Hot Print System for the development of latent fingermarks on thermal paper: A pseudo-operational trial

Enhancement of latent fingermarks on thermal paper poses a number of problems when using traditional methods used for porous substrates due to blackening of the thermal layer as a result of polar solvents present within the reagents and high temperatures oxidising the acid/dye complex. Thus, methods which prevent such reactions are favoured for the development of latent prints on said substrates. A comparative pseudo-operational trial using UV, Hot Print System (HPS), ninhydrin and ThermaNIN was performed on 1000 thermal paper substrates gathered from various sources. The results indicated that the most effective method was an acetone pre-wash followed by ninhydrin. The sequence of HPS-ninhydrin was similarly effective when compared to ninhydrin as a sole technique. ThermaNIN produced fewer marks than ninhydrin but was superior to HPS. Whilst the HPS developed some fingermarks, there was only a very small number of marks uniquely developed by it.     

The effect of household corrosive substances on latent fingermark development in the context of deliberate corrosive substance attacks

Corrosive substance attacks (CSA) are a prevalent issue in the UK with 525 offenses involving a corrosive substance reported to the police in the year ending March 2022. Easy availability, low cost, and concealability in public are common reasons for choosing a corrosive substance as a weapon. The Metropolitan Police revealed that 68% of 1849 CSA cases resulted in no suspect identified or evidential difficulties. There is limited research into the effect of corrosive substances on latent fingermarks. This study aimed to determine the potential for fingermarks to be recovered from surfaces exposed to a household corrosive substance within the context of a deliberate CSA. Natural and sebaceous-loaded fingermarks were exposed to Domestos bleach, Harpic limescale remover (hydrochloric acid-based) and lemon juice. Harpic limescale remover had the most detrimental effect, with only 7.1% of fingermarks (n = 378) exposed being identifiable (defined as sufficient clear ridge detail for identification) after enhancement, followed by bleach with only 10.3% of fingermarks (n = 378) identifiable. Lemon juice had the least detrimental effect on fingermarks, with 40.5% fingermarks (n = 378) identifiable compared to 53.4% for the controls (not exposed to any substance; n = 378). Throughout the study, fewer natural fingermarks were identifiable after exposure to corrosive substances compared to sebaceous fingermarks which was as expected. Overall, this study demonstrated that there is potential to recover latent fingermarks, depending on their composition, following exposure to a household corrosive substance. This area warrants further research to establish best practice to maximize the potential to recover identifiable fingermarks.     

Novel O‐propyl,S‐propyl,and N‐propyl substituted 1,4‐naphthoquinones and 1,4‐anthraquinones as potential fingermark development reagents for porous surfaces

Lawsone is a 2‐substituted‐1,4‐naphthoquinone derivative, which has been proposed as an alternative to the reagents currently used for fingermark detection on porous surfaces. 2‐substituted‐anthraquinones, which contain an additional conjugated benzene ring, have a similar chemical structure to that of lawsone. In this study, a new series of 2‐substituted‐1,4‐naphthoquinones and 2‐substituted‐1,4‐anthraquinones were synthesized and completely characterized by¹H NMR,¹³C NMR, IR, and HPLC‐TOF/MS analyses. All newly synthesized 2‐substituted‐1,4‐quinones were investigated for their ability to develop latent fingermarks on porous surfaces, and this ability was compared with that of lawsone. Each fingermark developed was graded using an established method; thus, quantitative data were attributed to each fingermark. It has been demonstrated that the 1,4 ‐ quinones react with amino acids present in latent fingermarks on selected paper surfaces to produce faint yellow‐orange impressions, which exhibit strong photoluminescence when illuminated with a forensic light source at 440 nm and observed through a red filter. None of the compounds caused background darkening. The results obtained were generally similar to those of lawsone, however, 8‐dibromo‐2‐(propylamino)naphthalene‐1,4‐dione and 5,8‐dibromo‐2‐(propylthio)naphthalene‐1,4‐dione yielded better results for copier paper and colored (blue) copier paper used in this analysis. To the best of our knowledge, this is the first study to examine the role of 1,4‐anthraquinone derivatives as potential fingermark development reagents. The results indicate that 1,4‐quinones have a potential to be used as reagents for enhancement of latent fingermarks.     

Preparation of a low-cost fingerprint powder that harnesses white light to emit long-lived phosphorescence

An inexpensive, commercially available doped strontium aluminate phosphor with long-lived afterglow has been prepared and assessed in the role of a luminescent fingerprint dusting powder. Blue, green, and aqua phosphorescence persisting for ca. 30 s was obtainable from treated fingermarks after charging the powders with the white light (400–700 nm) setting of a forensic light source. Imaging the phosphorescent afterglow enabled the elimination of background emissions encountered during latent fingermark examination. This was demonstrated by visualising fingermarks on substrates that possess inbuilt fluorescent security features and highly patterned substrate backgrounds, without any need for bespoke scientific equipment.     

Environmental effects on magnetic fluorescent powder development of fingermarks on bird of prey feathers

A comparison study of the effects of environmental conditions on the development of latent fingermarks on raptor feathers using green magnetic fluorescent powder was undertaken using both sebaceous loaded and natural fingermark deposits. Sparrowhawk feathers were stored in indoor conditions for 60?days (Study 1), and buzzard feathers were left exposed to two different environmental conditions (hidden and visible) for 21?days (Study 2), with developments made at regular ageing periods. In Study 1, latent fingermarks were successfully developed (Grade 1–4) on the indoor feathers up to 60?days after deposition – 98.6% of the loaded deposits and 85.3% for natural deposits. Under outdoor conditions in Study 2, both loaded and natural deposits were affected by environmental exposure. Latent fingermarks were successfully developed up to 14?days after deposition on the outdoor feathers, with some occasional recovery after 21?days. The visible feathers recorded 34.7% (loaded) and 16.4% (natural) successful developments (Grade 1–4), whereas the hidden feathers recorded 46.7% (loaded) and 22.2% (natural) successful developments, suggesting that protection from the environment helps to preserve latent fingermarks on the surface of a feather. Environmental exposure accelerated the deterioration of ridge detail and the number of successful developments.     

Preliminary efficiency evaluation of development methods applied to aged sebaceous latent fingermarks

Latent fingermarks are important trace evidence found in crime scenes mainly used for identification purposes. Once deposited, the composition of samples changes over time influencing the efficacy of latent fingermark development methods. In this sense, the aims of this work were to characterize the fatty acid (FA) profile of sebaceous latent fingermarks by GC–FID and to preliminarily evaluate the development efficiency of enhancement methods (powder dusting, iodine fuming and silver nitrate method) in a 30-day period of aging under controlled parameters of temperature, photoperiod and humidity. Results showed that myristic (7.51 ± 0.76% − 13.39 ± 1.26%), palmitic (35.91 ± 1.07% − 40.81 ± 2.52%), stearic (6.67 ± 0.36% − 9.13 ± 0.36%) and oleic (18.08 ± 0.25% − 20.93 ± 0.26%) acid varied significantly (p < 0.05) over the 30-day period of analysis. Regarding development efficiency, fluorescent orange powder and the silver nitrate method also increased their efficacy to develop latent fingermarks over time while the iodine fuming method decreased its efficiency. Silver black powder had constant efficacy in the tested period. Changes in the constitution of sebaceous marks possibly influenced the development efficiency of enhancement techniques. This knowledge is important to better understand the kinetic of aging and its influence on the development method.     

Fingermark detection on non-porous and semi-porous surfaces using NaYF4:Er,Yb up-converter particles

This article describes the first use of an anti-Stokes material, or up-converter, for the development of latent fingermarks on a range of non-porous surfaces. Anti-Stokes materials can absorb long-wavelength light and emit light at a shorter wavelength. This property is unusual in both natural and artificial materials and so fingermark detection techniques based on anti-Stokes luminescence are potentially sensitive and selective. Latent fingermarks on luminescent and non-luminescent substrates, including Australian polymer banknotes (a well-known 'difficult' surface), were developed with sodium yttrium tetrafluoride doped with erbium and ytterbium (NaYF(4):Er,Yb) by dry powder, wet powder, and cyanoacrylate staining techniques. This study illustrates the potential of up-converter phosphors for the detection of latent fingermarks.     

Fingermark visualisation on metal surfaces: An initial investigation of the influence of surface condition on process effectiveness

Fingermark recovery from metal surfaces is an area of operational interest, both from the association of metals with weapons used in violent crime and from the increasing incidence in metal theft. This paper reports a feasibility study into the effectiveness of a range of fingermark visualisation processes in developing fingermarks on clean metals (brass, bronze and stainless steel), and on the same metals after prolonged exposure to an outdoor environment. Scanning electron microscopy (SEM) was used to investigate how the surface type and condition could influence the development of fingermarks for each of the processes used. It was found that the behaviour observed varied between each of the processes (cyanoacrylate fuming, Lumicyano?, gun blueing and carbon-based powder suspension). In some cases the chemical composition of the surface affected the development of the mark more than the surface condition, and in other cases the reverse was true. The best performing processes differed according to the surface type and condition, with cyanoacrylate fuming processes working best on brass and bronze, and powder suspensions being better on stainless steel. These preliminary results reinforce the need to take into account both surface type and condition before selection of the most effective fingermark visualisation process and demonstrate the value of techniques such as SEM in developing a fundamental understanding of the interactions between fingermarks and surfaces.     

An investigation into the use of a portable cyanoacrylate fuming system (SUPERfume®) and aluminum powder for the development of latent fingermarks

Abstract: Few techniques offer “in situ” methods of friction ridge skin mark development. “In situ” development reduces mark transportation, degradation, and often cost. The effectiveness of cyanoacrylate fuming using the SUPERfume^® and dusting with aluminum powder for latent fingermark development on several nonporous surfaces, stored in various temperature environments for time periods up to 52 weeks, was investigated. Five thousand and four hundred latent fingermarks were deposited under controlled conditions and graded. The results suggested that cyanoacrylate fuming (SUPERfume^®, Foster and Freeman, U.K.) was more effective at developing latent fingermarks on textured and smooth plastic surfaces and for marks stored in temperatures of 37°C, whereas aluminum powder was more effective on glass, enameled metal paint, and varnished wood, and for storage temperatures below 20°C. There were no significant benefits to using either technique for marks older than 24 h, but it was possible to develop fingermarks following 52 weeks of storage using both techniques.     

A Small Population Study on Friction Skin Ridges: Differences in Ridge Widths Between Latent and Inked Fingerprints

Morphological changes in the width of latent fingermark ridges occur naturally over time. This could be used to examine the aging process of latents and eventually estimate time of deposition. In a crime context, it is common practice to compare a questioned (aged) fingermark with a database of known (inked) prints. Therefore, in the absence of fresh fingermarks for aging purposes, it is of interest to reveal correlations between these two categories of fingerprints with regard to the widths of their ridges. The present study explores correlations of ridge widths between flat and rolled inked prints with latent fingermarks visualized with carbon black (CB) and titanium dioxide (TiO₂)-based powders among a small population of ten donors. Results revealed consistent differences between the ridge widths of latent and inked prints as well as flat and rolled impressions. Latent fingermarks visualized with CB and TiO₂ powders showed ridges with comparable widths.