柔性隔声屏的设计与推广

对柔性隔声材料的隔声原理、隔声性能、隔声结构进行了研究.在大量实验数据的基础上,提出了柔性隔声材料的一些规律.并利用此规律,通过对实验材料进行改进,完成了JRSH系列柔性隔声屏障的设计、生产和应用.     

Cannabis Profiling Based on Its Elemental Composition—Is It Possible?

Abstract: Elemental composition of 85 cannabis samples was established using GF AAS and ICP OES methods. The robustness of the method was determined by analyzing eight independently prepared replicates from a single cannabis plant. The accuracy of the method was established by analyzing four plant certified reference material samples. The ability of discriminant analysis using elemental compositions to distinguish between fiber cannabis samples collected from four different regions of Poland was evaluated. Then, a classification model was developed that correctly classified selected samples of known origin. Cannabis samples confiscated by law enforcement agencies have also been subjected to discriminant analysis. A classification model has been developed for four locations in Poland (Bia?ystok, Ko?cierzyna, the environs of Skar?ysko Kamienna, and Bydgoszcz), to help determine where samples of unknown origin could have been grown.     

Analysis and discrimination of electrical tapes: part II. Backings

The backings of 90 black electrical tapes were analyzed to evaluate the chemical components of these films, the ability of individual techniques to discriminate samples, and the ability of the techniques combined to distinguish samples. The techniques utilized and their respective discrimination results were stereomicroscopy and physical measurements, to include observation of surface features of the backing, width, and thickness measurements (c. 64%); Fourier transform infrared spectroscopy (FTIR) using a microscope accessory (c. 83%); pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS; c. 81%); and scanning electron microscopy/energy-dispersive spectroscopy (SEM/EDS; c. 87%). Ninety-four percent of the backings were discriminated through this combination of analytical methods. Finally, evaluating these results in conjunction with previously published data on the analysis of the adhesives from the same set of electrical tapes provided an overall discrimination of nearly 96%.     

The use of filtered light for the evaluation of writing inks analyzed using thin layer chromatography

Thin layer chromatography (TLC) is a scientific methodology that can be used to compare and characterize ink formulations. Occasionally, when evaluating chromatographic profiles on a TLC plate with ambient light, different ink formulations, or the same inks from different batches, may appear indistinguishable. The use of filtered light can be very effective to illuminate characteristics that are not readily apparent with ambient light. There are a diverse number of components commonly found in writing inks, and it may be that some of them respond to particular wavelengths of energy that are not visible to the unaided eye (i.e., colorless). There has been very little information published that addresses the use of filtered light for evaluating TLC plates. Twenty-nine ballpoint writing ink samples were selected for TLC analysis. Further evaluation using an alternate light source, coupled with the appropriate filter, proved to be an effective means for definitive discrimination in some cases.     

The Characterization of 3,4-Dimethylmethcathinone (3,4-DMMC)

Analogs and derivatives of traditional illicit drugs are ever increasing in variety and creativity. Staying abreast of the new developments is a constant challenge for every forensic laboratory. Recently, a seizure from Australian Customs Service presented our laboratory with the designer cathinone 3,4-dimethylmethcathinone (3,4-DMMC). Gas chromatography/mass spectrometry (GC/MS), liquid chromatography/mass spectrometry (LC/MS), nuclear magnetic resonance (NMR) spectroscopy, infrared (IR) spectroscopy, and ultraviolet (UV) spectrophotometry were employed to analyze the spectroscopic characteristics of this cathinone. As an analog, 3,4-DMMC exhibits similar if not identical IR and UV profiles to mephedrone (4-MMC) and methcathinone; however, the retention time from GC is unique as expected, and the electron impact fragmentation pattern is consistent with the fragmentation pattern of other cathinones. The chemical shifts of the carbons and hydrogens were assigned by both one- and two-dimensional NMR techniques, while the molecular weight was confirmed by LC/MS.     

A Study of Background Levels of Antimony,Barium, and Lead on Vehicle Surface Samples by Graphite Furnace Atomic Absorption

Law enforcement agencies routinely sample for gunshot residue (GSR) by bulk techniques and often submit swabs taken from other surfaces besides the hands of the suspect shooter. This study aims to establish the prevalence of antimony, barium, and lead on normally handled automobile surfaces by graphite furnace atomic absorption analysis. No positives were determined on 50 sampled automobile surfaces above cutoff (positive) from background levels. Transfers of GSR particles from shooter hands to automobile surfaces were found to potentially allow for positive GSR determinations, but such transfers seem to be dependent on the shooting conditions and length of GSR exposure. We determined that our bulk analysis method yields an overall 87.94 ± 5.52% extraction efficiency from cotton swabs, while the LOQ determinations strengthening the fact that bulk analysis methods are valid and valuable tools for GSR investigations.     

The Extraction and Recovery Efficiency of Pure DNA for Different Types of Swabs

The extraction and recovery efficiency of swabs used to collect evidence at crime scenes is relatively low (typically <50%) for bacterial spores and body fluids. Cell‐free deoxyribonucleic acid (DNA) is an interesting alternative compared to whole cells as a source for forensic analysis, but extraction and recovery from swabs has not been tested before using pure DNA. In this study cotton, foam, nylon flocked, polyester and rayon swabs are investigated in order to collect pure DNA isolated from saliva samples. The morphology and absorption capacity of swabs is studied. Extraction and recovery efficiencies are determined and compared to the maximum theoretical efficiency. The results indicate that a substantial part of DNA is not extracted from the swab and some types of swab seem to bind effectively with DNA. The efficiency of the different types of swab never exceeds 50%. The nylon flocked 4N6FLOQSwab used for buccal sampling performs the best.     

傅立叶红外光谱（ATR）法检验纺织纤维

文章利用傅立叶红外光谱(ATR)法对收集到的纺织纤维样品进行种类上的区分,包括同种颜色(红色)不同品牌不同厂家的毛绒纤维样品,同一品牌相近颜色的纺织纤维样品,同种颜色(红色)不同品牌不同厂家的羊绒、腈纶纤维样品。根据红外谱图、数据分析,将纺织纤维样品分为3组,每组均为2类。其实验结果表明,红外光谱(ATR)法对于分析纺织纤维样品,分析速度快、样品需求量小,而且无损、不消耗检材,通过重复性实验,证实了其实验结果准确可靠。     

4种固相颗粒吸附法提取滤纸血痕DNA效果的比较

目的探讨4种固相颗粒吸附法提取滤纸血痕样本DNA的效果。方法含有1μL静脉血的滤纸血痕180份,分为4组,每组45份。分别采用4种固相颗粒吸附法(DNAIQ~(TM)系统、D盾超敏DNA提取试剂盒、超高效硅珠纯化DNA提取试剂盒和常规的硅珠法)对上述样本进行DNA提取,对比各组DNA溶液的浓度及STR分型检验结果。结果 D盾超敏DNA提取试剂盒[(3.764±1.790)μg/mL]、超高效硅珠纯化DNA提取试剂盒(3.634±1.112)及常规硅珠法(3.350±1.250)提取到DNA溶液的浓度无统计学差异(P0.05),但均高于DNA IQ~(TM)系统(1.864±1.207)(P0.001);D盾超敏DNA提取试剂盒、超高效硅珠纯化DNA提取试剂盒及常规硅珠法样本图谱峰高大于DNA IQ~(TM)系统(P0.001),超高效硅珠纯化DNA提取试剂盒和常规硅珠法样本图谱峰高大于D盾超敏DNA提取试剂盒(P0.01)。结论 D盾超敏DNA提取试剂盒、超高效硅珠纯化DNA提取试剂盒及常规硅珠法对于滤纸血痕的DNA提取效率高于DNA IQ~(TM)系统;超高效硅珠纯化DNA提取试剂盒和常规硅珠提取到的DNA溶液可能具有更高的质量。     

不同产地药材牛膝的红外光谱及红外导数光谱鉴别研究

目的 建立不同产地牛膝的红外光谱和红外导数光谱并对其差异性进行分析,为牛膝药材的快速鉴别提供依据.方法 运用傅里叶红外光谱技术结合二阶导数光谱对不同产地的牛膝药材进行鉴别,采用聚类分析和主成分分析对红外光谱数据进行统计分析.结果 牛膝的红外吸收峰主要在3289、2975、2890、1723、1630、1403、1321、1241、1018、927、814、773 cm-1附近,虽然不同产地牛膝所含化学成分具有相似性,但不同产地牛膝红外吸收峰的位置和相对强度存在一定差异;并且在二阶导数红外图谱的1800～800 cm-1波段中有更加明显差别,可以为其鉴别提供更准确的依据.聚类分析显示不同批次间相似度很高,主成分分析结果表明在1723、1630、927、814、651 cm-1等处的吸收峰对区分不同产地牛膝药材的贡献较大,内蒙古自治区赤峰市和河南省焦作市武陟县的牛膝药材综合评分较高.结论 红外光谱法与二阶导数光谱相结合不仅可以提供中药材所含化学成分的相关信息,还可以对其不同产地进行区分,实现对牛膝的快速鉴别.