Characterization of an odor permeable membrane device for the storage of explosives and use as canine training aids

The storage and use of explosives is regulated at the state and federal level, with a particular focus on physical security and rigorous accounting of the explosive inventory. For those working with explosives for the training and testing of explosive-detecting canines, cross-contamination is an important concern. Hence, explosives intended for use with canine teams must be placed into secondary storage containers that are new, clean, and airtight. A variety of containers meet these requirements and include screw-top glass jars (e.g., mason jars). However, an additional need from the explosive-detecting canine community is secondary containers that can also be used as training aids whereby the volatiles emitted by explosives are emitted in a predictable and stable manner. Currently, a generally accepted method for the storage of explosives and controlled emission of explosive vapor for canine detection does not exist. Ideally, such containers should allow odor to escape from the training aid but block external contaminates such as particulates or other volatiles. One method in use places the explosive inside a permeable cotton bag when in use for training and then stores the cotton bag inside an impermeable nylon bag for long-term storage. This paper describes the testing of an odor permeable membrane device (OPMD) as a new way to store and deploy training aids. We measured the evaporation rate and flux of various liquid explosives and volatile compounds that have been identified in the headspace of actual explosives. OPMDs were used in addition to traditional storage containers to monitor the contamination and degradation of 14 explosives used as canine training aids. Explosives were stored individually using traditional storage bags or inside an OPMD at two locations, one of which actively used the training aids. Samples from each storage type at both locations were collected at 0, 3, 6, and 9 months and analyzed using Fourier Transform Infrared (FTIR) Spectroscopy and Gas Chromatography–Mass Spectrometry (GC–MS) with Solid-Phase Microextraction (SPME). FTIR analyses showed no signs of degradation. GC–MS identified cross-contamination from ethylene glycol dinitrate (EGDN) and/or 2,3-dimethyl-2,3-dinitrobutane (DMNB) across almost all samples regardless of storage condition. The contamination was found to be higher among training aids that were stored in traditional ways and that were in active use by canine teams.     

Overview of the seized and examined pharmaceutical in the state of Minas Gerais-Brazil by the Civil Police from 2017 to 2022: A fundamental analysis of the recent impact over the drugs market

This work presents a data survey regarding the qualitative chemical analysis of drugs seized by the Police in the state of Minas Gerais between July 2017 and June 2022, including an evaluation of labeling of 265 samples of anabolic androgenic steroids (AAS) seized in 2020. The Active Pharmaceutical Ingredients (API) present in the samples were identified through chemical analysis and classified by system Anatomical Therapeutic Chemical (ATC) methods. Analysis of the labeling information for 265 samples of AAS followed the guidance of legislation RDC 71 (2009) from ANVISA. For this study 6355 seized pharmaceuticals underwent qualitative chemical analysis that corresponded to 7739 APIs successfully identified and classified. Among the components studied AAS, psychostimulants, anesthetics, and analgesics were the most commonly examined. AAS seized and tested increased by over 100% and for the majority of the samples analyzed were found to not match the labeling on the packaging. In the meantime, anti-obesity drugs presented a prominent increase of 400% from 2020/1 to 2021/2, during covid-19 quarantine. Seized pharmaceuticals and tests can support information in the planning of public health and safety policies.     

Evaluating the discriminating power of amino acid ratios on distinguishing dark colored hair samples

Human hairs are one of the most commonly encountered items of trace evidence. Currently, conventional methods for hair analysis include microscopic comparison and DNA analysis (nuclear and mitochondrial). Each approach has its own drawbacks. Hair proteins are stable and offer an alternative to DNA testing, as demonstrated with proteomics for distinguishing humans. However, proteomics is complicated and requires identifying peptides to remain intact following harsh sample preparation methods. Alternatively, the actual amino acid content of a hair sample may also offer important identifying information and actually requires proteins and peptides to be broken down completely rather than remaining intact. This study evaluated the discriminating power of using hair amino acid ratios to differentiate hair samples from 10 unrelated individuals with dark colored hair. Hair proteins were digested, derivatized, and analyzed using gas chromatography–mass spectrometry. Amino acid ratios were calculated for each individual and comparisons using ANOVA and post-hoc pairwise t-test with Bonferroni correction were made with amino acid ratios for individuals. Overall, out of the 45 possible pairwise comparisons between all hair samples, 38 (84%) were differentiable. Out of the 36 possible pairwise comparisons between brown haired individuals, 32 (89%) were considered differentiable using univariate statistics. Multivariate statistics were also attempted but, overall, univariate models were sufficient for exclusionary purposes. These results indicate that amino acid ratio analysis can potentially be used as an exclusionary method using hair if DNA analysis cannot be performed, or to corroborate conclusions made following microscopic analysis.     

Saving more than the children: the role of child-focused NGOs in the creation of southern security norms

The past decade has seen the emergence of ‘new critical discourses’ on security that argue for a widening of the term. This article hopes to add to such discussions by specifically examining the position of children and of the ngos that champion their rights in relation to the evolving security discourse in Southern societies. With this in mind, the first section of the article outlines the role of ngos in the contemporary practice of security. This will serve as an introduction to section two, where the activity of ngos vis-à-vis children will be considered. Such activity raises a number of questions with regard to the usefulness of incorporating children into the security discourse specifically, and to the social construction of ‘children’ generally. These will be outlined in section three. Section four argues for children to be considered as inherent to the creation of Southern security norms, while the final section concludes.     

Correlation between saw blade width and kerf width

Most studies of saw marks have focused on morphological characteristics and their utility in identifying saws suspected to have been utilized in cases of criminal dismemberment. The present study examined the extent to which metric analysis may be used to correlate saw blade measurements with minimum kerf widths (MKWs). A sample of 56 partially defleshed white‐tailed deer (Odocoileus virginianus) long bones was utilized as proxy for human remains. The long bones were cut using a variety of commercially available saws, including 11 manual‐powered and 5 mechanical‐powered saws. A total of 496 false start kerfs (FSKs) were created. Two experiments were performed, with the first test examining the MKWs of FSKs produced on specimens that were restrained using a bench vise, while the second test analyzed the MKWs of FSKs produced on minimally restrained specimens. Statistical analysis using Hierarchical Linear Modeling (HLM) indicated a positive relationship between saw blade width (mm) and MKW, with blade width (p < 0.001) and the overall difference between the mechanical‐ and manual‐powered saws (p = 0.029) tested, reaching statistical significance. A comparison of MKWs produced using manual‐powered saws on restrained and minimally restrained bones suggests that restraint condition (p = 0.009) has a statistically significant effect. In comparisons of MKWs to blade widths, the average ratio for mechanical‐powered saws is 18.7% greater than the average ratio for manual‐powered saws. While the mode of the ratios was 1.42, thus supporting the general rule that MKW does not exceed 1.5 times blade width, multiple individual ratios did surpass 1.5.     

Forensic determination of hair deposition time in crime scenes using electron paramagnetic resonance

Several types of biological samples, including hair strands, are found at crime scenes. Apart from the identification of the value and the contributor of the probative evidence, it is important to prove that the time of shedding of hair belonging to a suspect or victim matches the crime window. To this end, to estimate the ex vivo aging of hair, we evaluated time‐dependent changes in melanin‐derived free radicals in blond, brown, and black hairs by using electron paramagnetic resonance spectroscopy (EPR). Hair strands aged under controlled conditions (humidity 40%, temperature 20–22°C, indirect light, with 12/12 hour of light/darkness cycles) showed a time‐dependent decay of melanin‐derived radicals. The half‐life of eumelanin‐derived radicals in hair under our experimental settings was estimated at 22 ± 2 days whereas that of pheomelanin was about 2 days suggesting better stabilization of unpaired electrons by eumelanin. Taken together, this study provides a reference for future forensic studies on determination of degradation of shed hair in a crime scene by following eumelanin radicals by utilizing the non‐invasive, non‐destructive, and highly specific EPR technique.     

Evaluation and applicability of Alere iCup DX 14 for rapid postmortem urine drug screening at autopsy

Performing point‐of‐care urine drug screen testing at autopsy by a forensic pathologist may provide an early indication of the presence of analytes of interest during autopsy. An evaluation for the screening of 14 classes of common drugs of abuse in postmortem urine by the point‐of‐care screening device, Alere iCup DX 14, is presented. One hundred ninety postmortem urine samples were screened with the iCup occurring at autopsy by the forensic pathologist. Positive and negative results obtained from the screening kit were evaluated against confirmatory test results obtained using routine forensic toxicology analyses that employed LC‐MS/MS and GC‐MS to detect a combination of over 85 common drugs of abuse and medications. Sensitivity for each respective iCup drug class ranged from 66% (buprenorphine) to 100% (methadone, tricyclic antidepressants). Specificity for each respective iCup drug class ranged from 89% (benzodiazepines) to 100% (amphetamines, barbiturates, buprenorphine, 3,4‐methylenedioxymethamphetamine, methadone). Positive predictive values ranged from 44% (benzodiazepines) to 100% (amphetamines, barbiturates, buprenorphine, methylenedioxymethamphetamine, methadone), while negative predictive values ranged from 96% (methamphetamine) to 100% (barbiturates, methadone, tricyclic antidepressants). A high false‐positive rate was yielded by the benzodiazepine class. The lack of fentanyl screening in the point‐of‐care device is a significant limitation considering its prolific prevalence in forensic casework. The results obtained in the study should be acknowledged when considering the use of the Alere iCup DX 14 in the context of postmortem casework to help indicate potential drug use contemporaneously with autopsy and when requiring such preliminary results prior to the release of a final forensic toxicology report.     

Identification of furosemide in hair in a post‐mortem case by UHPLC‐MS/MS with guidance on interpretation

Testing for drugs in hair raises several difficulties. Among them is the interpretation of the final concentration(s). In a post‐mortem case, analyses revealed the presence of furosemide (12 ng/mL) in femoral blood, although it was not part of the victim's treatment. The prosecutor requested our laboratory to undertake an additional analysis in hair to obtain information about the use of furosemide. A specific method was therefore developed and validated to identify and quantify furosemide in hair by UHPLC‐MS/MS. After decontamination of 30 mg of hair, incubation in acidic condition, extraction with ethyl acetate, the samples were analyzed by UHPLC‐MS/MS. Furosemide was found in the victim's hair at 225 pg/mg. However, it was not possible to interpret this concentration due to the absence of data in the literature. Therefore, the authors performed a controlled study in two parts. In order to establish the basis of interpretation, several volunteers were tested (four after a single 20 mg administration and twenty‐four under daily treatment). The first part indicated that a single dose is not detectable in hair using our method. The second part demonstrated concentrations ranging from 5 to 1110 pg/mg with no correlation between dosage and hair concentrations. The decedent's hair result was interpreted as repeated exposures. In the case of furosemide analysis, hair can provide information about its presence but cannot give information about dosage or frequency of use.     

Characterization and differentiation of aluminum powders used in improvised explosive devices – Part 1: Proof of concept of the utility of particle micromorphometry

Aluminum (Al) powders are commonly used in improvised explosive devices as metallic fuels, a component of explosive mixtures. These powders can be obtained readily from industrial‐scale and consumer products, and produced using unsophisticated “kitchen chemistry” techniques. This research demonstrates the potential of automated particle micromorphometry for comparisons between known source and questioned Al powders recovered from IEDs, as well as for insight into the method of Al powder manufacture. Al powder samples were obtained from legitimate manufacturers, and 56 samples were produced “in‐house” from Al‐containing spray paints and ball‐milled Al foils. Transmitted light microscope images of Al powder particles were acquired using an automated stage with automated z‐focus; 17 size and shape parameters were measured for all particles. Approximately 37,000–2,500,000 particles/sample were analyzed using an open‐source statistical package with customized code. Dimensionality reduction was required for processing the large datasets: eight of the 17 measured variables were selected based on inspection of the correlation matrix. Data from four subsamples from each of the 56 samples produced using “in‐house” methods were analyzed using ANOVA to assess the within‐ and between‐sample variation. High within‐sample variation was noted; however, ANOVA and post‐hoc Tukey's honestly significant difference (HSD) tests demonstrated that the between‐sample variation was substantially larger than the within‐sample variation. Each sample could be differentiated from all other samples in the test set. Future experiments will focus on ways to reduce the within‐sample variation, and additional statistical and microanalytical methods to classify sources and confidently constrain the method of Al powder manufacture.     

Fatal non-accidental pediatric cranial fracture risk and three-layered cranial architecture development

This study examines the influence of three-layered cranial architecture development upon blunt force trauma (BFT) cranial outcomes associated with pediatric non-accidental injury (NAI). Macroscopic and microscopic metric and morphological comparisons of subadult crania ranging from perinatal to 17 years of age chronicle the ontogenetic development and spatial and temporal variability in the emergence of a mature cranial architecture. Cranial vault thickness increases with subadult age, accelerating in the first 2 years of life due to rapid brain growth during this period. Three-layer differentiation of the cranial tables and diploë initiates by 3–6 months but is not consistently observed until 18 months to 2 years; diploë formation is not well developed until after age 4 and does not manifest a mature appearance until after age 8. These results allow topographic documentation of cortical and diploic development and temporal and spatial variability across the growing cranium. The lateral cranial vault is identified as expressing delayed development and reduced expression of the three-layer architecture, a pattern that continues into adulthood. Comparison of fracture locations from known BFT pediatric cases with identified cranial fracture high-risk impact regions shows a concordance and suggests the presence of a higher fracture risk associated with non-accidental BFT in the lateral vault region in subadults below the age of 2. The absence or lesser development of a three-layered architecture in subadults leaves their cranial bones, particularly in the lateral vault, thin and vulnerable to the effects of BFT.