The effect of corrosive substances on fingermark recovery: A pilot study

Corrosive substance attacks have become a growing issue within the UK. Although most commonly occurring in gang-related offences, there are high profile instances where this type of attack has been used to attack women to disfigure and destroy livelihoods. Despite the increase in such attacks, there has been very little published research into the recovery of forensic evidence from items used in these crimes. The effect of corrosive substances on the recovery of different types of forensic evidence is unknown, and there is no guidance for laboratories processing exhibits contaminated with corrosive substances regarding optimum treatments. This pilot study focused on establishing the effectiveness of a range of fingermark visualisation processes in recovering fingermarks on surfaces exposed to concentrated sulfuric acid (acid) and potassium hydroxide (alkali). Results indicate that on non-porous surfaces vacuum metal deposition and powder suspensions remain effective, and on porous surfaces fingermarks could still be visualised with physical developer. Alkalis were found to be more detrimental than acid environments in this limited study. The results demonstrate that fingermark recovery is still feasible on surfaces exposed to corrosive substances and provides encouragement that treatment protocols could be developed for this type of exhibit.     

The effects of corrosive substances on human bone, teeth, hair, nails, and soft tissue

Abstract: This research investigates the effects of household chemicals on human tissues. Five different human tissues (bone, tooth, hair, fingernails, and skin/muscle/fat) were immersed into six different corrosive agents. These agents consisted of hydrochloric acid, sulfuric acid, lye, bleach, organic septic cleaner, and Coca‐Cola^® soda. Tap water was used as a control. Tissue samples were cut to consistent sizes and submerged in the corrosive liquids. Over time, the appearance, consistency, and weight were documented. Hydrochloric acid was the most destructive agent in this study, consuming most tissues within 24 h. Sulfuric acid was the second most destructive agent in this study. Bleach, lye, and cola had no structural effects on the hard tissues of the body, but did alter the appearance or integrity of the hair, nails, or flesh in some way. The organic septic cleaner and tap water had no effect on any of the human tissue tested during the timeframe of the study.     

Symptom Overreporting and Recovered Memories of Childhood Sexual Abuse

The authenticity of recovered memories is a much debated issue. Surprisingly, no study has systematically looked at symptom overreporting in people claiming recovered memories of childhood sexual abuse (CSA). In a first sample we administered the Structured Inventory of Malingered Symptomatology (SIMS) to individuals who said they had recovered CSA memories (n=66), individuals who said their CSA had always been accessible (continuous CSA memory group; n=119), and controls who said they had no CSA experiences (n=83). In a second sample individuals reporting recovered (n=45) or continuous (n=45) CSA memories completed the Morel Emotional Numbing Test (MENT). Our aim was to compare these groups with regard to their tendency to overreport symptoms. The results indicate that people with recovered memories do not score higher on the SIMS and the MENT than other CSA survivors suggesting that symptom overreporting is not typical for people reporting recovered memories.     

Trauma Characteristics and Posttraumatic Stress Disorder among Adolescent Survivors of Childhood Sexual Abuse

This study examined the relationship between the characteristics of childhood sexual abuse (CSA) and the severity of consequent posttraumatic stress disorder (PTSD), depression, suicidal ideation, and substance use in a sample of 83 female adolescents aged 13–18 years seeking treatment for PTSD. Nearly two-thirds of the sample (60.7 %, n?=?51) reported the perpetrator of the CSA was a relative. A large portion (40.5 %, n?=?34) of the sample reported being victimized once, while almost a quarter of the sample reported chronic victimization (23.8 %, n?=?20). PTSD and depression scores were in the clinical range, whereas reported levels of suicidal ideation and substance use were low. The frequency of victimizations was associated with suicidal ideation. Contrary to expectation, CSA characteristics including trauma type, perpetrator relationship, and duration of abuse were unrelated to PTSD severity, depressive symptoms, or substance abuse.     

Reasons for Returning to Abusive Relationships: Effects of Prior Victimization

Studies have demonstrated that women with a history of childhood sexual abuse (CSA) are at increased risk of revictimization, but research has not yet examined whether a history of CSA may affect patterns of remaining in or returning to abusive relationships in adulthood. This study examines the impact of a CSA history on decisions to return to abusive relationships in a sample of 104 adult domestic violence survivors. Participants were interviewed about the number of times that they had previously separated from and returned to their abusive partner, the factors that influenced their decision to return (both psychological/internal and environmental/external factors), and their perceived likelihood of returning in the future. As predicted, CSA survivors (n = 34) reported a significantly greater number of past separations than non-CSA survivors (n = 70). CSA survivors were also significantly more likely to report that their decisions to return were influenced by emotional attachment to the batterer. CSA survivors did not perceive themselves to be at greater risk of returning in the future, suggesting that they may be more likely to underestimate their vulnerability to returning to the battering relationship. Clinical implications of the findings are discussed.     

The Recovery of Latent Fingermarks from Evidence Exposed to Ionizing Radiation*

Abstract: Continual reports of illicit trafficking incidents involving radioactive materials have prompted authorities to consider the likelihood of forensic evidence being exposed to radiation. In this study, we investigated the ability to recover latent fingermark evidence from a variety of substrates that were exposed to ionizing radiation. Fingermarks deposited on common surfaces, including aluminum, glass, office paper, and plastic, were exposed to doses ranging from 1 to 1000 kGy, in an effort to simulate realistic situations where evidence is exposed to significant doses of radiation from sources used in a criminal act. The fingermarks were processed using routine fingermark detection techniques. With the exception of glass and aluminum substrates, radiolysis had a considerable effect on the quality of the developed fingermarks. The damage to ridge characteristics can, in part, be attributed to chemical interactions between the substrate and the components of the fingermark secretions that react with the detection reagents.     

A Preliminary Study on Vacuum Metal Deposition as a Standalone Method for Enhancement of Fingermarks on Ballistic Brass Materials

In order to assess the efficacy of vacuum metal deposition (VMD) as a technique to develop fingermarks on ballistic metallic surfaces, a preliminary study using six donors (three male & three female) was conducted. Using a sequential metal deposition process, two metal combinations were studied—gold/zinc and silver/zinc. Results indicate the potential of this technique, by developing identifiable fingermarks on brass metal disks aged from a few days up to more than a month old. As the development of fingermarks on fired (brass) cartridge cases is an area of interest, a further study was conducted where a total of 20 fingermarks were deposited on cases. After firing, second level fingermark characteristics were successfully observed on cartridge cases highlighting its potential as a fingermark enhancement method for ballistic brass materials. Further work is required to fully evaluate the VMD process and its reliability as a fingermark enhancing method on ballistic surfaces.     

The Effect of Varying the Composition of Fingerprint Sweat Deposits on the Corrosion of Brass and Fingerprint Visibility

Corrosion of α‐phase brass by sebaceous sweat fingerprint deposits produced identifiable impressions in a majority of samples (n = 40) 4 days after deposition. Combining sebaceous with eccrine sweat yielded a greater percentage of identifiable fingerprint deposits, although this increase was not statistically significant. Production of identifiable fingerprints from eccrine sweat deposits was dependent on the sampling time of year with deposits taken during summer months giving similar percentages of identifiable fingerprints to sebaceous deposits. A statistically significant positive correlation was found between elapsed days after deposition and identifiable eccrine (ρ = 0.787, p < 0.05), sebaceous (ρ = 0.724, p < 0.05), and eccrine/sebaceous mixture (ρ = 0.908, p < 0.01) fingerprints deposited during summer months. The summer increase in the percentage of identifiable eccrine sweat deposits was statistically significant compared to winter eccrine deposits (p < 0.0001). Observations were consistent with results obtained from artificial sebaceous and eccrine sweat.     

Development of Latent Fingermarks from Rocks and Stones

Since the beginning of recorded history, stones have been used in the commission of crimes due to their widespread availability. Stones can be used as a lethal weapon that sometimes might be the only evidence in a serious case. The common perception, even in professional fingermark circles, is that stones do not yield identifiable latent fingermarks. The authors of this research paper examined the feasibility of developing fingermarks from seven types of stones using three latent fingermark techniques: magnetic powder, cyanoacrylate fuming, and ninhydrin. The paper will demonstrate that by classifying stones and rocks according to their natural properties (porosity, permeability, and the nature of surface area), even application of the simplest development techniques can produce good results. In conclusion, chert and limestone yielded the most qualitative and quantitative results using magnetic powder. The time factor is also important in recovering latent fingermarks on stones and rocks.     

Evaluation of six presumptive tests for blood, their specificity, sensitivity, and effect on high molecular-weight DNA

Luminol, leuchomalachite green, phenolphthalein, Hemastix, Hemident, and Bluestar are all used as presumptive tests for blood. In this study, the tests were subjected to dilute blood (from 1:10,000 to 1:10,000,000), many common household substance, and chemicals. Samples were tested for DNA to determine whether the presumptive tests damaged or destroyed DNA. The DNA loci tested were D2S1338 and D19S433. Leuchomalachite green had a sensitivity of 1:10,000, while the remaining tests were able to detect blood to a dilution of 1:100,000. Substances tested include saliva, semen, potato, tomato, tomato sauce, tomato sauce with meat, red onion, red kidney bean, horseradish, 0.1 M ascorbic acid, 5% bleach, 10% cupric sulfate, 10% ferric sulfate, and 10% nickel chloride. Of all the substances tested, not one of the household items reacted with every test; however, the chemicals did. DNA was recovered and amplified from luminol, phenolphthalein, Hemastix, and Bluestar, but not from leuchomalachite green or Hemident.     

Refining Fingermark Development using Diacetylene Copolymers on Difficult Surfaces,

In further work investigating the intriguing application of diacetylene copolymers in fingermark detection, methods were developed to control (inhibit or enhance) the diacetylene polymerization reaction in fingermarks treated with a mixture of the monomers 2,4‐hexadiyne‐1,6‐bis‐(phenylurethane) (HDDPU) and 2,4‐hexadiyne‐1,6‐bis(p‐chlorophenylurethane) (HDDCPU) in acetone solution. These methods included the use of a humidity chamber to reduce the amount of background development while promoting development on the fingermark, subjecting developed fingermarks to freezing temperatures and using a solvent to remove unreacted monomer in order to inhibit the polymerization reaction. Developed fingermarks were enhanced by conventional lighting (white light, filtered light) and fast Raman mapping, which was shown to be advantageous over FTIR imaging. This study also demonstrated the applicability of diacetylene copolymer solutions in the covert detection of fingermarks on difficult surfaces. Furthermore, fingermarks were successfully developed with good ridge detail on pig skin (used as a model for human skin, a notoriously difficult surface on which to develop fingermarks).     

Environmental effects on magnetic fluorescent powder development of fingermarks on bird of prey feathers

A comparison study of the effects of environmental conditions on the development of latent fingermarks on raptor feathers using green magnetic fluorescent powder was undertaken using both sebaceous loaded and natural fingermark deposits. Sparrowhawk feathers were stored in indoor conditions for 60?days (Study 1), and buzzard feathers were left exposed to two different environmental conditions (hidden and visible) for 21?days (Study 2), with developments made at regular ageing periods. In Study 1, latent fingermarks were successfully developed (Grade 1–4) on the indoor feathers up to 60?days after deposition – 98.6% of the loaded deposits and 85.3% for natural deposits. Under outdoor conditions in Study 2, both loaded and natural deposits were affected by environmental exposure. Latent fingermarks were successfully developed up to 14?days after deposition on the outdoor feathers, with some occasional recovery after 21?days. The visible feathers recorded 34.7% (loaded) and 16.4% (natural) successful developments (Grade 1–4), whereas the hidden feathers recorded 46.7% (loaded) and 22.2% (natural) successful developments, suggesting that protection from the environment helps to preserve latent fingermarks on the surface of a feather. Environmental exposure accelerated the deterioration of ridge detail and the number of successful developments.     

The Effects of Household Corrosive Chemicals on Human Dentition*

Abstract: There is a gap in the literature concerning the chemical effects that household products may produce on human remains. The present study examines the effects of household chemical products on teeth. A total of eight chemicals were utilized for this experiment. The corrosive chemical categories include: hydrochloric acid, sulfuric acid, phosphoric acid, and sodium hydroxide. Two products with each chemical were used, each representing varying concentrations of the corrosive product. Two human teeth were allocated for emergence in the chemical throughout a 24‐h period of exposure. Results demonstrate hydrochloric acid as the most detrimental chemical to the dental samples. Sulfuric acid enacted minimal alterations to the teeth, although some etching and discoloration were noticeable. Phosphoric acid resulted in variable changes of the organic and inorganic contents of teeth. Lastly, exposure of sodium hydroxide resulted in little to no change. As hypothesized, distinct effects are observable of each chemical.     

An Examination of the Relationship Between Competency to Stand Trial,Competency to Waive Interrogation Rights,and Psychopathology

This study compared the legal abilities of defendants (N = 212) with current primary psychotic disorders (n = 44), affective disorders (n = 42), substance abuse disorders (n = 54), and no diagnosed major mental illness (n = 72). Defendants with primary psychotic disorders demonstrated more impairment than did other defendants in their understanding of interrogation rights, the nature and object of the proceedings, the possible consequences of proceedings, and their ability to communicate with counsel. Psychosis was of limited value as a predictor however, and high rates of legal impairment were found even in defendants with no diagnosed major mental illness. Sources of within-group variance were examined to further explain this finding. Policy and clinical implications of these results are discussed.     

Exploring the recovery and detection of messenger RNA and DNA from enhanced fingermarks in blood

Often in the examination of bloodstained fingermarks discussion occurs around whether to prioritise the fingerprint evidence or focus on the biological evidence. Collecting a sample for genetic profiling may result in the loss of ridge detail that could have been used for fingerprint comparison. Fingermark enhancement and recovery methods along with sample collection methods could also compromise downstream genetic analysis. Previous forensic casework has highlighted circumstances where, after enhancement had been performed, it would have been extremely valuable to both identify the body fluid and generate a DNA profile from the same sample.We enhanced depletion series of fingermarks made in blood, using single treatments consisting of aqueous amido black, methanol-based amido black, acid yellow and leucocrystal violet, and exposure to long wave UV light. We then extracted the DNA and RNA for profiling, to assess the recovery and detection of genetic material from the enhanced fingermarks.We have shown that genetic profiling of bloodstained fingermarks can be successful after chemical enhancement; however it may still be necessary to prioritise evidence types in certain circumstances. From our results it appears that even with visible bloodstained fingermarks, leucocrystal violet can reduce the effectiveness of subsequent messenger RNA profiling. Aqueous amido black and acid yellow also have adverse effects on messenger RNA profiling of depleted fingermarks with low levels of cellular material. These results help with forensic decision-making by expanding knowledge of the extent of the detrimental effects of blood-enhancement reagents on both DNA profiling and body fluid identification using messenger RNA profiling.     

Alterations in human bones and teeth as a result of restricted sun exposure and contact with corrosive agents

Skeletal remains were discovered in an unused cistern near the Omaha, Nebraska airport and were positively identified through comparison of antemortem and postmortem dental radiographs. Although nearly nine years had elapsed between death and discovery, the bones and teeth revealed evidence of the application of a corrosive substance at or about the time of death, as well as an unusual restricted response to sun exposure, that contributed to the prosecution and murder conviction of a member of Hell's Angels in the Omaha area.     

Visualization of Fingermarks Deposits on Untreated Thermal Paper Exploiting the Near Infrared Luminescence

Thermal paper is widely used as a print medium for different applications but it constitutes a tricky substrate for fingermark visualization. An earlier work (J Forensic Sci 2015; 60 :1034) reported how to visualize fingermarks on untreated thermal paper by illuminating the item with a UV-A light source. In the present paper, the potential of the near infrared (NIR) luminescence has been tested on thermal paper compared to the mentioned method. A controlled study was carried out utilizing eccrine enriched fingermarks. The promising outcomes obtained were further confirmed by performing a pseudo-operational trial. Data clearly showed that the use of the NIR filter gave better results. Finally, preliminary tests suggested a different mechanism of reaction induced by fingermarks with respect to the one behind the thermal printing. Thus, NIR luminescence represents a refinement to the suite of optical examination processes, including the potential to increase the number of marks recovered in a noncontact, nondestructive way.     

Further Pseudo-Operational Trials with the Lumicyano Double- and Co-Fuming Process for the Detection of Latent Fingermarks

This study presents a number of pseudo-operational trials on plastic bags investigating the double- and co-fuming process of a one-step fluorescent cyanoacrylate (Lumicyano^TM) in comparisons with the two-step process with basic yellow 40 (BY40) staining for the detection of latent fingermarks. The results demonstrate that both Lumicyano solution and dye contribute to the increased detection of latent fingermarks during the double-fuming process (trial 1). Co-fuming the Lumicyano solution and dye separately (at a concentration of 8%) but simultaneously was less effective than 8% Lumicyano (trial 2). Co-fuming Lumicyano 8% and an additional 8% Lumicyano dye by weight was more effective than Lumicyano 8% (trial 3), possibly due to increased fluorescent material deposition during co-fuming allowing for better visualization. The use of BY40 after Lumicyano resulted in a considerable increase in detected fingermarks.     

Application of mist to fingermark detection: Misting with high-boiling-point liquid containing p-dimethylaminocinnamaldehyde and cyanoacrylate

In order to detect latent fingerprints that could be damaged by liquid or powder reagents, non-destructive processes such as gaseous reagents have been developed. In this report, we propose the use of fine mist generated when hot vapor of high-boiling-point liquids is rapidly cooled by surrounding air for fingermark detection. Octyl acetate (OA), 2-phenoxyethanol (2PE), and methyl decanoate (MD) were found to efficiently produce mist when heated to 230°C. By combining these liquids with p-dimethylaminocinnamaldehyde (DMAC) and cyanoacrylate (CN), our team demonstrated effective fluorescence staining of cyano-treated fingermarks using DMAC/OA misting or DMAC/2PE misting, and one-step fluorescence detection of latent fingermarks without cyanoacrylate treatment using DMAC/OA/CN misting or DMAC/MD/CN misting. Fingermark fluorescence was efficiently observed by excitation with a blue LED light (max. wavelength 470 nm) equipped with an interference filter and passing through a 520 nm long-pass filter. We successfully obtained fluorescent images from fingermarks on several substrate materials using the developed misting method.