Effects of Different Temperatures on the Development of Dermestes Frischii and Dermestes Undulatus (Coleoptera,Dermestidae): Comparison Between Species

Dermestidae could be useful in forensic investigations to assess the PMI as adults and larvae colonize dried remains. We reared two species of Dermestidae (Dermestes frischii and Dermestes undulatus) to understand the effects of different temperatures on the length of their whole life cycle and on their immature stages. Both species were reared at 23°C ± 0.5, RH 75% and at 26°C ± 0.5, 75% RH. Our result shows that the temperature is the main factor that influences the development of those species; in fact, increasing temperature leads to a shorter development cycle (59.8 ± 0.5 and 38.1 ± 0.2 for D. frischii; 50.6 ± 0.6 and 36.2 ± 0.2 for D. undulatus). Furthermore, we found that the number of the molts before the pupa decreases from 5–7 to 5–6 for D. frischii and from 4–6 to 4–5 for D. undulatus, respectively, at 23°C and 26°C.     

Temperature‐dependent Development of Parasarcophaga similis (Meade 1876) and its Significance in Estimating Postmortem Interval

Flesh flies are commonly found insects on decaying corpses that appears slightly later than blowflies, and their development patterns are significant indicators for minimum postmortem interval (PMI_min) estimation. In this study, the flesh fly Parasarcophaga similis (Meade 1876) was reared at nine constant temperatures ranging from 15°C to 35°C to examine indicators for estimating their age. We generated three development models, including isomorphen diagram, isomegalen diagram, and thermal summation model. Larval body length at different rearing temperatures was fit into an L = a + bT + cT² + dT³ equation with which the relationship between the larval body length (L) and the time after larviposition (T) was confirmed. The pupal stage was categorized into 13 substages according to intrapuparial morphological changes, and a detailed table was generated of the pupal developmental stages at five rearing temperatures, 15°C, 20°C, 25°C, 30°C, and 35°C. This study provides fundamental data in supporting P. similis as an indicator for PMI_min estimation.     

Quantifying the Temperature of Maggot Masses and its Relationship to Decomposition

Numerous Calliphoridae species have been observed to form larval aggregations during the feeding stage of development, resulting in localized increases in temperature. This study investigates the relationship between maggot numbers in a mass and heat generation. Single‐species aggregations (Lucilia sericata) of various sizes (50–2500 individuals) were reared in the laboratory at a constant ambient temperature of 22°C. Internal mass temperatures were recorded every 5 min throughout the feeding stage of development. Results showed that mass temperatures increased with mass numbers (p‐value < 0.001), ranging from 2.5 to 14°C above ambient. A minimum mass size of 1200 produced overall temperatures that were significantly warmer than ambient, diverging away from 22°C after c. 26 h. These results indicate that the microclimate of a mass has the potential to differ significantly from ambient, which may be influencing larval development rates and should therefore be factored into mPMI estimates to increase accuracy.     

Development of a PCR High‐Resolution Melt Assay for Artemisia absinthium (Wormwood) and a Triplex Assay with Two Additional “Unregulated Legal High” Species Datura stramonium (Jimson Weed) and Merremia tuberosa (Hawaiian Woodrose),

Artemisia absinthium (wormwood), a common ingredient in absinthe, contains the compound thujone, which is unregulated by the U.S. Drug Enforcement Agency. Thujone can cause an “unregulated legal high” in higher concentrations. The European Union limits thujone from Artemisia species to 35 mg/kg while the U.S. Food and Drug Administration requires less than 10 ppm to be “thujone‐free.” However, individuals can smoke or ingest A. absinthium in different forms. This study developed a polymerase chain reaction (PCR) high‐resolution melt (HRM) assay to detect and identify A. absinthium based on primer specificity, sensitivity, repeatability, and robustness. A triplex assay was performed with three “unregulated legal high” species: Datura stramonium, Merremia tuberosa, and A. absinthium; the PCR HRM assay detected and identified each plant at melt temperatures 77.42 ± 0.20°C, 83.88 ± 0.22°C, and 87.77 ± 0.15°C, respectively. The primer set developed distinguished A. absinthium from a variety of plant species and was successfully triplexed.     

The Effect of Soft Tissue on Temperature Estimation from Burnt Bone Using Fourier Transform Infrared Spectroscopy

This study investigated the effect of soft tissue and different exposure times on the prediction of burning temperatures of bone when using Fourier transform infrared spectroscopy (FTIR). Ovis aries rib bones were burnt at different temperatures and for varying time intervals. Results of a linear regression analysis indicated that burn temperatures can be predicted with a standard error of ±70°C from defleshed bone spectra. Exposure time does not have a significant impact on prediction accuracy. The presence of soft tissue has a significant impact on heat‐induced changes of the bone matrix in low (<300°C) as well as high temperatures (>800°C), slowing down combustion in the former and accelerating it in the latter (p < 0.05). At medium temperatures, no significant difference was noted. These results provide forensic investigators a new perspective with which to interpret the results of crystallinity measures derived from burnt bone.     

Effect of Temperature on Six Different Developmental Landmarks within the Pupal Stage of the Forensically Important Blowfly Calliphora vicina (Robineau‐Desvoidy) (Diptera: Calliphoridae)

This study investigates the pupal development times of the blow fly Calliphora vicina, which were studied in the laboratory at six different constant temperatures (15, 20, 23, 25, 28, and 30°C each ± 1°C). Lower thresholds (t_L) for development were estimated from the linear regression of the developmental rates on each temperature. These data have made it possible to calculate the accumulated degree days (ADD) necessary for C. vicina to complete the larval stage and to achieve adult emergence. The minimal duration of development from oviposition to adult emergence was found to be inversely related to temperature. Additionally, six landmarks in pupal development are showed, and for each of the landmarks, the ADD value was calculated for every rearing temperature involved. These data assist in calculating the duration of the pupal stage based on morphological characteristics and would be of great value for future forensic entomological casework.     

Developmental Times of Chrysomya megacephala (Fabricius) (Diptera: Calliphoridae) at Constant Temperatures and Applications in Forensic Entomology

The characteristic life stages of infesting blowflies (Calliphoridae) such as Chrysomya megacephala (Fabricius) are powerful evidence for estimating the death time of a corpse, but an established reference of developmental times for local blowfly species is required. We determined the developmental rates of C. megacephala from southwest China at seven constant temperatures (16–34°C). Isomegalen and isomorphen diagrams were constructed based on the larval length and time for each developmental event (first ecdysis, second ecdysis, wandering, pupariation, and eclosion), at each temperature. A thermal summation model was constructed by estimating the developmental threshold temperature D₀ and the thermal summation constant K. The thermal summation model indicated that, for complete development from egg hatching to eclosion, D₀ = 9.07 ± 0.54°C and K = 3991.07 ± 187.26 h °C. This reference can increase the accuracy of estimations of postmortem intervals in China by predicting the growth of C. megacephala.     

The Effect of Temperature and Laboratory Rearing Conditions on the Development of Dermestes maculatus (Coleoptera: Dermestidae)

Experiments were conducted to study the life cycle of Dermestes maculatus and to establish the total developmental time and the developmental time of immature stages, in relation with six different temperatures. We also analyzed the variations in size, morphology, and other indicators of temporal variation during life cycle of D. maculatus, in relation with temperature. One hundred larvae were selected per experiment, reared individually. The remaining larvae were reared to evaluate and establish temporal variations among the instars (length, cephalic width, and dry weight). In all trials, survivorship was greater than 50% and seven larval instars were found. Data of the average developmental time of immature stages and of the total cycle, at different temperatures, are provided. This is of relevance when estimating particularly, a minimum PMI. No relation between morphometric parameters and temperature was found, suggesting that other random factors may have been involved. Thus, this indicates that the method of isomegalen diagrams could not be used for calculating PMI.     

Taphonomic Marks on Pig Tissue Due to Cadaveric Coleoptera Activity Under Controlled Conditions

The aim of this work was to study taphonomic marks that cadaveric coleopteran can produce under controlled conditions. To evaluate this, pig trotters were initially exposed to adults of Dermestes maculatus De Geer at 21 ± 5°C and a 12:12‐h day/night cycle. Observations were made and photographs taken every 4–5 days for 9 months. When feeding and reproducing, D. maculatus produced, in both adult and larvae stages, different types of marks such as holes, striations, scratches, and pits in several kinds of tissue such as integumental, connective, and muscular, in both their fresh and dried stages. Bite marks were also evident. The results in this study provide not only taphonomic but also biological and forensic information. This is the first time that this kind of experiment has been performed.     

Estimating the Temperature of Heat‐exposed Bone via Machine Learning Analysis of SCI Color Values: A Pilot Study

Determining maximum heating temperatures of burnt bones is a long‐standing problem in forensic science and archaeology. In this pilot study, controlled experiments were used to heat 14 fleshed and defleshed pig vertebrae (wet bones) and archaeological human vertebrae (dry bones) to temperatures of 400, 600, 800, and 1000°C. Specular component included (SCI) color values were recorded from the bone surfaces with a Konica‐Minolta cm‐2600d spectrophotometer. These color values were regressed onto heating temperature, using both a traditional linear model and the k‐nearest neighbor (k‐NN) machine‐learning algorithm. Mean absolute errors (MAE) were computed for 1000 rounds of temperature prediction. With the k‐NN approach, the median MAE prediction errors were 41.6°C for the entire sample, and 20.9°C for the subsample of wet bones. These results indicate that spectrophotometric color measurements combined with machine learning methods can be a viable tool for estimating bone heating temperature.     

Effects of Ketamine on the Development of forensically important Blowfly Chrysomya megacephala (F.) (Diptera: Calliphoridae) and its Forensic Relevance

This study investigated effects of ketamine on the development of Chrysomya Megacephala (Diptera: Calliphoridae) at three different temperatures. Larvae of the C. Megacephala were exposed to different concentrations of drugs and temperatures. The larval lengths, weights, and developmental durations of each stage were observed. This study demonstrated that ketamine, low temperature, and their synergistic action significantly suppressed the development of C. Megacephala (p < 0.001). The time that the larvae in all the treatments achieved the maximum length/weight was significantly delayed (p < 0.05), and that resulted in prolonged duration of larval and prepupal stages especially at low temperature. However, no linear correlations were discovered between ketamine concentration and growth rate of larval length/weight.     

An Experiment to Characterize the Decomposer Community Associated with Carcasses (Sus scrofa domesticus) on Oahu,Hawaii

Pig (Sus scrofa domesticus) carcasses were decomposed on the soil surface of a terrestrial habitat on the island of Oahu, Hawaii to begin characterizing the decomposer community. Results showed that carcasses can decompose rapidly on Oahu, primarily due to the activity of fly larvae, with ~80% of mass lost by 8 days (~220 ADD) postmortem. Scavenging was conducted exclusively by the small Indian mongoose (Herpestes javanicus), first feeding on larvae then feeding on the remains. Carcasses were habitats of warm temperature, little to no oxygen, slightly acidic/neutral pH, and high sodium concentration. Larval masses selected for a microbial community comprised of multiple bacterial taxa from phyla Firmicutes and Proteobacteria, particularly genera Clostridium, Proteus, and Providencia. These larval masses were well established from 3 to 8 days (~90 to ~220 ADD) postmortem. These data provide helpful, novel insight into the structure and activity of carcass decomposer communities on Oahu.     

The Use of the Developmental Rate of the Aquatic Midge Chironomus riparius (Diptera,Chironomidae) in the Assessment of the Postsubmersion Interval

Nonbiting midges (Diptera, Chironomidae) are the most abundant members of the fauna associated with submerged carcasses, but their use in the medicolegal context is very restricted because of their complex ontogeny. In this case, the corpse of a woman was recovered in late spring from a river in Granada (Iberian Peninsula). It showed obvious signs of long permanence in the aquatic environment and, along with pulmonary and microscopical analyses, led to the conclusion that the cause of death was drowning. Several larvae‐like specimens were sampled from the scalp and later identified by morphological external features as IV instar larvae of Chironomus riparius Meigen, 1804 (Diptera, Chironomidae). Sequencing of cytochrome oxidase subunit I was performed to confirm the identification. The knowledge of the biology of C. riparius at low temperatures was critical to assess a postsubmersion interval of 16–17 days.     

Detection and Identification of Psilocybe cubensis DNA Using a Real‐Time Polymerase Chain Reaction High Resolution Melt Assay,

Psilocybe cubensis, or “magic mushroom,” is the most common species of fungus with psychedelic characteristics. Two primer sets were designed to target Psilocybe DNA using web‐based software and NBCI gene sequences. DNA was extracted from eighteen samples, including twelve mushroom species, using the Qiagen DNeasy^® Plant Mini Kit. The DNA was amplified by the polymerase chain reaction (PCR) using the primers and a master mix containing either a SYBR^® Green I, Radiant? Green, or LCGreen Plus^® intercalating dye; amplicon size was determined using agarose gel electrophoresis. The PCR assays were tested for amplifiability, specificity, reproducibility, robustness, sensitivity, and multiplexing with primers that target marijuana. The observed high resolution melt (HRM) temperatures for primer sets 1 and 7 were 78.85 ± 0.31°C and 73.22 ± 0.61°C, respectively, using SYBR^® Green I dye and 81.67 ± 0.06°C and 76.04 ± 0.11°C, respectively, using Radiant? Green dye.     

Bacterial Degradation of Risperidone and Paliperidone in Decomposing Blood

The stability of two benzisoxazole antipsychotics was determined in vitro in decomposing porcine blood inoculated with bacteria, utilizing a high‐performance liquid chromatography with ultraviolet and fluorescence detection method for drug quantitation. Stability experiments for risperidone and paliperidone were conducted at 7, 20 and 37°C for 4 days using sterile and bacterially inoculated porcine blood. The drugs were stable in sterile blood at each temperature and in inoculated blood at 7°C, but degraded significantly in inoculated blood at 20 and 37°C. Complete loss occurred within 2 days when incubated at 37°C. The benzisoxazole‐cleaved degradation products for both drugs were identified as 2‐hydroxybenzoyl‐risperidone and 2‐hydroxybenzoyl‐paliperidone utilizing liquid chromatography quadrupole‐time‐of‐flight mass spectrometry and accurate mass measurements. The degradation products have been found in postmortem case studies, including one case where risperidone and paliperidone were not detected, indicating complete conversion can occur in situ.     

Scanning Electron Microscopy–Energy‐Dispersive X‐Ray (SEM/EDX): A Rapid Diagnostic Tool to Aid the Identification of Burnt Bone and Contested Cremains

This study investigates the use of Scanning electron microscopy–energy‐dispersive X‐ray (SEM‐EDX) as a diagnostic tool for the determination of the osseous origin of samples subjected to different temperatures. Sheep (Ovis aries) ribs of two experimental groups (fleshed and defleshed) were burned at temperatures of between 100°C and 1100°C in 100°C increments and subsequently analyzed with the SEM‐EDX to determine the atomic percentage of present elements. Three‐factor ANOVA analysis showed that neither the exposure temperature, nor whether the burning occurred with or without soft tissue present had any significant influence on the bone's overall elemental makeup (p > 0.05). The Ca/P ratio remained in the osseous typical range of between 1.6 and 2.58 in all analyzed samples. This demonstrates that even faced with high temperatures, the overall gross elemental content and atomic percentage of elements in bone remain stable, creating a unique “fingerprint” for osseous material, even after exposure to extreme conditions.     

Determining Volumetric Shrinkage Trends of Burnt Bone Using Micro-CT

Understanding the degree and pattern of shrinkage undergone by bone when subjected to heating is crucial to accurately deduce a biological profile from incinerated remains. X-ray microtomography (micro-CT) enables a nondestructive insight into hard tissue structural changes, while allowing for an accurate documentation of volumetric and trabecular shrinkage. Sheep ribs were experimentally burned at temperatures between 400 and 1000°C in 100°C increments and their volumetric shrinkage was calculated. Observed shrinkage ranged from 14.0% at 400°C to 45.5% at 1000°C. Bones burned at temperatures up to 600°C showed no significant difference, whereas the 700 and 800°C samples exhibited higher shrinkage. Bones burnt at 900 and 1000°C showed significantly higher shrinkage than the other temperature groups. Findings signify the potential of micro-CT in research on the effects of factors such as diagenesis or burning on the bone density, morphology and microarchitecture.     

Variation in Developmental Time for Geographically Distinct Populations of the Common Green Bottle Fly,Lucilia sericata (Meigen)*

Abstract: Time between death and discovery of remains, or postmortem interval (PMI), can be assessed using blow fly maggot age. Forensic entomologists rely on published, often nonlocal, species‐specific developmental tables to determine maggot age. In a series of common garden experiments, we investigated the developmental rate variation between populations of Lucilia sericata collected from Sacramento, CA, San Diego, CA, and Easton, MA at 16°C, 26°C, and 36°C. For the 16°C trial the time measurement started at egg hatch, while for the higher temperatures the experiment began at oviposition; the wandering stage signified the endpoint for all experiments. The distribution of developmental times differed significantly (ANOVA, p < 0.001) between the three populations within each temperature treatment. We discovered that regional variation of developmental times within a blow fly species exists. This study demonstrates the importance of assembling local population‐specific developmental tables when estimating larval age to determine PMI.     

In Vitro Effects of Household Products on Calliphoridae Larvae Development: Implication for Forensic Entomology

Several parameters can delay the first arrival of flies on a corpse and the subsequent development of the larvae. This study focuses on the development of Lucilia sericata (Diptera: Calliphoridae) (Meigen, 1826) on household chemical‐contaminated substrates. bleach, perfume, hydrochloric acid, caustic soda, insecticide, mosquito repellent, and gasoline in quantities consistent with an amount that could possibly be spilled on a corpse were mixed with beef liver to simulate contaminated fleshes. Larvae were bred at 25°C on these media until emergence. Four developmental parameters were followed: survival rates, development times, sex ratios, and adult sizes. Hydrochloric acid, insecticide, and gasoline killed all larvae. In low quantities, caustic soda and mosquito repellent increased the development time and decreased the adult size. However, high quantities of these chemicals killed all larvae. Lastly, bleach and perfume did not affect the survival rate and barely impacted the development time or adult size. These results demonstrate common household products spilled on a corpse can strongly affect the development of Calliphoridae larvae. The effects of such products should be considered in forensic entomology cases.     

The Optimal Combination of Cartilage Source and Apparatus for Long‐Term In Vitro Chondrocyte Viability Analysis

Abstract: Most studies of long‐term chondrocytes survival were for tissue banks. They showed a gradual reduction in the viable chondrocytes percentage as a function of time and ambient temperature, but the samples were harvested under optimal conditions. The aim of our study was to determine the most reliable combination of cartilage source and assay for the in vitro postmortem chondrocyte viability analysis in the conditions that imitate a dead body. Osteochondral cylinders were procured from femoral condyles and talar trochleas of three male donors and stored in the cell culture media at 4 ± 2°C and 23 ± 2°C. The samples were analyzed by a cell viability analyzer and a confocal laser scanning microscope (CLSM) initially 24–36 h after death and then in 4‐week intervals. The results reconfirmed the significant influence of time (p = 0.0002), but not of the temperature (p = 0.237). The largest reproducibility was presented for the knee joint and the CLSM.