Impurity profiling of methamphetamine hydrochloride drugs seized in the Philippines

Methamphetamine hydrochloride is one of the most widely used illicit drugs in the Philippines. In this study, we describe the application of cluster analysis of trace impurities in the profiling of the seized methamphetamine drug samples. Thirty milligrams of a homogenized drug sample were dissolved in 1 mL of pH 10.5 buffer solution and extracted with ethyl acetate containing three internal standards. The trace impurities were identified using gas chromatography-mass spectrometry (GC-MS) and quantified by gas chromatography with a flame ionization detector (GC-FID). Following previously reported methodologies, 30 impurity peaks were selected from the GC-FID chromatograms. The peak areas and retention times were referenced to the internal standards. The peak areas of the selected peaks were then grouped for cluster analysis. In order to check for consistency of clustering, two further cluster analyses were performed using 40 and 50 impurity peaks. Changes in clustering were observed in going from 30 to 40 impurity peaks, while analyses using 40 and 50 impurity peaks gave similar results. Thus, for the seized drug samples used in this study, cluster analysis using at least 40 impurity peaks showed better consistency of clustering as compared to analysis using 30 peaks only. Ten of the impurity peaks were identified, of which four were identified for the first time in methamphetamine drug samples. These are p-bromotoluene, N-benzyl amphetamine, N-ethyl amphetamine, and N-ethyl methamphetamine. The presence of phenyl-2-propanone (P2P), N,N-dimethyl amphetamine, and N-formyl amphetamine is indicative that these casework samples were synthesized using the Leuckart method.     

Cross-examination of liquid-liquid extraction (LLE) and solid-phase microextraction (SPME) methods for impurity profiling of methamphetamine

Impurities in 48 methamphetamine (MA) samples were analyzed by liquid-liquid extraction (LLE) and headspace solid-phase microextraction (HS-SPME) methods. MPS-2 autosampler was used to improve reproducibility of SPME method, and nonadecane (C(19)) diluted with potassium bromide (KBr) powder was used as an internal standard for standardizing retention time. Impurities identified by SPME method showed different patterns compared with LLE method. Non-volatile impurities like methamphetamine dimer were not identified by SPME method, but some volatile impurities like diphenylketone, caprolactam and lots of unknowns were identified only by SPME method. 1-Phenyl-2-propanone (P2P), 1-phenyl-2-propanol and benzylcyanide peaks could be discriminated clearly by SPME method without interference of amphetamine, an artifact originates from MA degradation. Differences in the impurity patterns resulted in different clustering results. When 48 MA samples were classified into 5 LLE and 5 SPME clusters, cross-matching of the clusters resulted in 8 sub-clusters. It shows that combination of the different extraction methods can distinguish the differences which cannot be distinguished by LLE or SPME method alone, and can improve reliability of the profiling results.     

Methamphetamine impurity profiling using a 0.32 mm i.d. nonpolar capillary column

Classification of seized methamphetamine by impurity profiling can provide very useful information in criminal investigations of drug traffic routes, sources of supply and relationships between seizures. The aim of this study is to improve and develop an analytical method for detecting impurities such as starting materials and by-products in illegally prepared methamphetamine.HCl samples. A 50mg sample of methamphetamine.HCl was dissolved in 1 ml of buffer solution (four parts 0.1M phosphate buffer pH 7.0 and one part 10% Na2CO3). Impurities were extracted with 0.5 ml of ethyl acetate containing four internal standards (ISs) (n-decane, n-pentadecane, n-nonadecane and n-hexacosane) and analyzed by gas chromatography (GC) using a flame ionization detector (FID) on a DB-5 capillary column (0.32 mmi.d. x 30 m, film thickness 1.0 microm). The use of a middle-bore column offered better separation of the impurity peaks. The correction of the retention times of impurity peaks with four ISs made peak identification very accurate for subsequent data processing. Twenty-four characteristic peaks were selected for comparison and similarity and/or dissimilarity between samples, and the data were evaluated by the Euclidean distance of the relative peak areas after logarithmic transformation. The results indicate that the present method would be useful for methamphetamine impurity profiling.     

Drug intelligence based on organic impurities in illicit MA samples

One major objective of the European project "Collaborative Harmonisation of Methods for Profiling of Amphetamine Type Stimulants" (CHAMP), funded by the sixth framework programme of the European Commission, consisted of the harmonisation of a gas chromatography/mass spectrometry (GC/MS) method for the analysis of organic impurities found in illicit methamphetamine (MA) samples in a drug intelligence perspective. Statistical analysis provided a selection of pertinent variables among the 43 organic impurities identified in the chromatograms. As for the 3,4-MethyleneDioxyMethAmphetamine (MDMA) study, correlation coefficients were used as a discrimination tool between populations of linked samples (from the same seizure) and unlinked samples (from different seizures). It was also shown that correlation measurements based on Pearson and cosine functions applied to the data pre-treated by normalisation to the sum of peak responses followed by the square root provided excellent discrimination between the two populations. The organic impurities profiling method was proved to be relevant for the characterization of samples from different seizures and their synthesis route patterns.     

Identification of impurities and the statistical classification of methamphetamine using headspace solid phase microextraction and gas chromatography-mass spectrometry

The profiling of impurities in methamphetamine (MA) using headspace solid phase microextraction (HS-SPME) and gas chromatography-mass spectrometry (GC-MS) is described. The extraction of the impurities with an SPME fiber was examined under varying conditions. Optimal chromatograms were obtained when a 50 mg MA sample at 85 degrees C for 30 min was extracted using a fiber coated with divinylbenzene/carboxen/polydimethylsiloxane. MA samples from nine different origins were analyzed under optimized extraction conditions. Compounds related to MA such as benzaldehyde, benzyl alcohol, amphetamine, benzyl methyl ketone, cis- and trans-1,2-dimethyl-3-phenylaziridine, dimethylamphetamine, N-acetylamphetamine, N-acetylmethamphetamine and N-formylmethamphetamine were detected in the chromatograms. Trace amounts of ethanol, diethyl ether and acetic acid were also detected in some of the chromatograms. The numbers and intensities of the peaks detected were different, depending on the sample. After the areas of the eight principal peaks were converted to their square root and logarithm, similarities among the samples were evaluated by Euclidian distance, cosine distance and correlation coefficient. The results showed that a combination of logarithmic conversion and cosine distance was the most suitable for discriminating and classifying the samples. HS-SPME/GC-MS is a simple and effective method for the extraction and identification of impurities. The present method, in combination with an appropriate statistical analysis, would be useful for developing a profile of impurities in MA.     

The impurity characteristics of methamphetamine synthesized by Emde and Nagai method

Impurity profiling and classification of seized methamphetamine may play an important role in the interpretation of analytical results, the determination of the synthetic method employed, and the criminal investigations of drug traffic routes. Our study is focused on classifying seized methamphetamine samples according to the groups sorted by the types and quantities of impurities present in illicit methamphetamine samples. The samples (100 mg) were dissolved in 2 mL of potassium phosphate buffer (pH 7.0), extracted with 200 μL of ethyl acetate under basic condition, and then analyzed by gas chromatography-mass spectrometry (GC–MS) with a DB-1 capillary column (30 m × 0.25 mm i.d., 0.25 μm). Five impurities are used as criteria for the classification of seized methamphetamine samples by Emde and Nagai method. A total of fifty-two samples of seized methamphetamine were analyzed by GC–MS and classified by five organic impurities, and then sorted into four groups, which are Nagai type, Emde Type, Undetermined I type, and Undetermined II type.     

Contribution of thermal desorption and liquid-liquid extraction for identification and profiling of impurities in methamphetamine by gas chromatography-mass spectrometry

Impurity profiling of methamphetamine (MA) using thermal desorption (TD) and gas chromatography-mass spectrometry (GC-MS) was examined. Using TD/GC-MS, impurities were extracted and separated under various conditions. Optimal chromatograms were obtained when a 20 mg MA sample was extracted at 120 degrees C for 3 min using a TD instrument, followed by separation of the extracts using a non-polar capillary column coated with (5%phenyl)-methylpolysiloxane. MA samples from nine different batches were analyzed under optimized conditions. Compounds related to the structure of MA, such as benzaldehyde, benzyl alcohol, amphetamine, cis- and trans-1,2-dimethyl-3-phenylaziridine, dimethylamphetamine, and N-acetylephedrine, were detected in the chromatograms without any laborious extraction procedure. Compounds such as ethanol, diethyl ether, and acetic acid, which are considered reagents and solvents for MA synthesis, were also detected in some of the chromatograms. The numbers and intensities of the peaks detected were different among the samples. Impurity profiling of MA using TD was compared with that using liquid-liquid extraction (LLE). Better reproducibility of peak areas was obtained using LLE, whereas higher intensities and numbers of peaks were detected using TD. Solvents were extracted more effectively using TD. The nine batches of MA were classified using both extraction procedures. The nine batches were divided roughly into two groups using data from LLE. Subsequently, the groups were classified in detail using data from TD. TD can be used to provide supplemental information for LLE, and the combination of these extraction methods can be helpful for impurity profiling of MA.     

Optimum methamphetamine profiling with sample preparation by solid-phase microextraction

Solid-phase microextraction (SPME) is a relatively new technique in which a small, polymer-coated fiber is employed to extract volatile and semivolatile organic compounds from the sealed headspace above a questioned sample. SPME, coupled with gas chromatography/mass spectrometry (GC/MS), was used to characterize impurities in illicit methamphetamine samples. Trace impurities present in a specimen were tentatively identified using mass-spectral databases and included 1,2-dimethyl-3-phenyl-aziridine (indicating synthesis via a halogenated ephedrine intermediate), ethyl vanillin (a flavoring compound), and caffeine (a stimulant used as cutting agent). The types and numbers of organic compounds sampled by SPME were compared with those collected by various solvent extraction protocols. In addition to unambiguously confirming the presence of methamphetamine, SPME-GC/MS analyses detected approximately 30 more organic analytes than were found by GC/MS following the ethyl acetate extraction method adopted by the United Nations International Drug Control Programme. SPME-GC/MS is a superior method for generating material "fingerprint" profiles in methamphetamine samples. The detection and characterization of increased points of comparison in drug samples provide more detailed chemical signatures for both intelligence and operational information.     

Identification of impurities and statistical classification of methamphetamine tablets (Ya-Ba) seized in Thailand

Impurity profiles of methamphetamine tablets seized in Thailand have been investigated. The samples are extracted with small amounts of ethyl acetate under alkaline condition and the extracts are analyzed by capillary gas chromatography. Nine compounds (1,2-dimethyl-3-phenylaziridine, ephedrine, methylephedrine, N-formylmethamphetamine, N-acetylmethamphetamine, N-formylephedrine, N-acetylephedrine, N,O-diacetylephedrie, methamphetamine dimer) are identified as impurities in methamphetamine tablet. Caffeine and ethyl vanillin are also detected as diluents and/or adulterants, and acetylcodeine monoacetylmorphine and diacetylmorphine are contained in many samples. In addition, trans-3,4-dimethyl-5-phenyl-2-oxazolidone is newly found as an impurity. For characterization and comparison of methamphetamine tablet exhibits, intensely and commonly detectable nine peaks are selected as the factor for multivariate analysis. The procedures reported here permit classification of 250 analyzed exhibits into five groups and characterization of classified groups.     

Effective injection in pulsed splitless mode for impurity profiling of methamphetamine crystal by GC or GC/MS

Gas chromatography (GC) and gas chromatography/mass spectrometry (GC/MS) are commonly used for the impurity profiling of illegal drugs. For the impurity profiling of methamphetamine, it is very important to obtain information about impurities related to the manufacturing route and the precursor chemicals [B. Remberg, A.H. Stead, Drug characterization/impurity profiling, with special focus on methamphetamine: recent work of the United Nations International Drug Control Programme, Bull. Narcotics LI (1999) 97-117 ]. There are many artifact impurities arising from the preparation of samples and conditions of GC. Moreover, some impurities pose a barrier to the statistical processing of methamphetamine profiling. We investigated capillary GC analysis using pulsed splitless (PS/L) injection to minimize the thermal decomposition of impurities at the injection port and improve the transfer of samples into the column. We confirmed that the optimal conditions of PS/L-mode are 230 degrees C (injection temperature), 50 psi (pulsed pressure) and 1.1 min (pulsed time) for the methamphetamine profiling. Based on the impurity profiles of 48 methamphetamine crystals in PS/L-mode, we can achieve very easy handling and obtained, good results.     

Illegal Route Estimation of the Seized Illicit Drug, Methamphetamine, by the Comparison of Striation Marks on Plastic Packaging Films

Abstract:  In Japan, the most common illicit drug is methamphetamine. It is possible to trace the origin of this drug by analyzing its organic and inorganic impurities and/or byproducts using several methods, such as GC, GC/MS, and inductively coupled plasma-mass spectrometry (ICP-MS). As reported here, one other method includes comparison of the striation lines of polymer sheet layers from packaging using a polarized light method. Other alternative methods include analyzing the heat sealer pattern, layer thickness surface characteristics, and/or components of polymer sheet layers using infrared spectroscopy. Several of these alternative methods were used to analyze the origins of 29 packages confiscated from three regions over a 1000 km distance in Japan. Results indicated that packages seized from different regions had some polymer sheet layers which contained striation lines and heat sealer patterns that were similar.     

The application of amino acid racemization in the acid soluble fraction of enamel to the estimation of the age of human teeth

The main objectives of the European project "Collaborative Harmonization of Methods for Profiling of Amphetamine Type Stimulants" (CHAMP) funded by the sixth framework programme of the European Commission, included the harmonization of MDMA profiling methods and the creation of a common database in a drug intelligence perspective. In the preliminary stages of this project, the participating laboratories analysed the physical characteristics, the chemical composition and the organic impurities of MDMA tablets, using the previously harmonized methods. The aim of the present work was to apply statistical treatments to the recorded data in order to evaluate their potential in the fight against drug trafficking. Comparable working procedures were applied on the different types of data. The first part of this article deals with organic impurities data, while the second part focuses on the potential of the physical characteristics. Organic impurities data were recorded by a harmonized Gas Chromatography/Mass Spectrometry (GC/MS) method previously developed. Statistical analysis provided a selection of pertinent variables among the 46 organic impurities identified in the chromatograms. Correlation coefficients were used to yield separation between populations of samples coming from the same synthesis batch and samples coming from different batches. It was shown that correlation measurements based on Pearson and cosine functions applied to the data pre-treated by normalisation to the sum of peak responses followed by the square root provided an excellent discrimination between the two populations. The statistical methods applied to organic impurities profiles proved to be excellent techniques to differentiate samples from different batches and to highlight operational links between samples.     

Population data on the 11 STR loci in the Upper Silesia (Poland)

Smuggling of methamphetamine is affected by enforced regulation and international situation, resulting in changes of precursors and synthetic methods used. Enantiomer ratio of methamphetamine can provide information concerning its precursor and synthetic method. This information is useful for the prevention of smuggling methamphetamine and its precursor, and resultant reduction of methamphetamine abuse. In the present study, we investigated on the enantiomer ratios of 433 crystalline methamphetamine samples seized in Korea from 1994 to 2005. Excluding 17 samples of low purity, 416 samples were used for enantiomer profiling. The methamphetamine samples were derivatized with (S)-(+)-alpha-methoxy-alpha-(trifluoromethyl)phenylacetyl chloride ((S)-(+)-MTPACl), and the derivatives were analyzed by GCMS in selected ion monitoring (SIM) mode. The enantiomer ratios of the samples were calculated from the standard calibration curves of each enantiomer, both of which showed good linearity in the range of 0-1.2 microg. Most of the seizures were pure S(+)-enantiomer, but 21% (95 of 416 samples) contained R(-)-enantiomer above 1%. They began to appear from 1997, and increased continuously up to 50% in the year 2005 (55 of 111 samples). From this study, we could find out that alternative precursors have been used recently for the illicit manufacture of methamphetamine seized in Korea.     

Comparison and classification of methamphetamine seized in Japan and Thailand using gas chromatography with liquid-liquid extraction and solid-phase microextraction

Methamphetamine (MA) is one of the most frequently abused drugs worldwide. The aim of this study is to improve the analytical method for profiling MA impurity in order to compare and classify MA crystals seized in different countries and to investigate the relationships between seizures. To compare MA samples seized in Japan and Thailand, the following analytical method was adopted. A 50mg sample of MA.HCl was dissolved in 1ml of buffer solution (four parts 0.1M phosphate buffer, pH 7.0, and one part 10% Na(2)CO(3)), impurities were extracted with 0.5ml of ethyl acetate containing four internal standards (n-decane, n-pentadecane, n-eicosane and n-octacosane) and analyzed by gas chromatography with a flame ionization detector on a DB-5 capillary column (0.32mm i.d.x30m, film thickness 1.0mum). Fourteen characteristic peaks on chromatograms were selected for the comparison and classification of samples, and the data were evaluated by the Euclidean distance of the relative peak areas after logarithmic transformation. Sixty-nine samples seized in Japan and 42 seized in Thailand were analyzed. The samples were classified into four groups roughly by cluster analysis. In addition, when it was difficult to compare samples that had fewer impurities on chromatograms obtained from liquid-liquid extraction (LLE), solid-phase microextraction (SPME) was effective. Because many characteristic peaks were detected using SPME, SPME made it easy to compare samples of high purity. The combination of LLE and SPME was useful for impurity profiling of MA samples seized in different countries.     

Forensic application of chiral separation of amphetamine-type stimulants to impurity analysis of seized methamphetamine by capillary electrophoresis

The applicability of capillary electrophoresis (CE) with a UV detector using highly sulfated gamma-cyclodextrin as a chiral selector was examined for analysis of impurities in seized methamphetamine. Samples of methamphetamine-hydrochloride dissolved in water at a high concentration (20 mg/mL) were analyzed. Electrokinetic injection has an advantage over hydrodynamic injection for improving the detection of trace impurities. Small peaks of the precursor impurities, such as (1R,2S)-(-)-ephedrine and (1S,2S)-(+)-pseudoephedrine, were detected and quantified without extraction. The seized drugs could be classified into three groups based on the contents of the two impurities.     

Neutral heroin impurities from tetrahydrobenzylisoquinoline alkaloids

Laudanosine, reticuline, codamine, and laudanine are members of the tetrahydrobenzylisoquinoline family of natural products. These alkaloids are present in the opium poppy, Papaver somniferum, and are subsequently found as impurities in clandestinely processed morphine. Morphine is then synthesized to heroin using hot acetic anhydride. During the course of this study, it was determined that these four tetrahydrobenzylisoquinolines undergo degradation to a series of 18 neutral impurities when subjected to hot acetic anhydride. Based on the degradation pathway, these new impurities were categorized into two sets of impurities called the C1-acetates compounds and the stilbene compounds. Synthesis, isolation, and structural elucidation information is provided for the tetrahydrobenzylisoquinoline alkaloids, and the new neutral impurities have been studied. Several hundred authentic heroin samples were analyzed using an established heroin signature program method. This methodology features the detection of trace neutral impurities present in heroin samples. It was determined that all 18 new impurities were detected in various quantities in four different types of heroin samples. Analytical results featuring these new impurities are reported for South American-, Southwest Asian-, Mexican-, and Southeast Asian-type heroin samples. These new impurities, coupled with other established forensic markers, enhance the ability to classify illicit heroin samples.     

Basic and neutral route specific impurities in MDMA prepared by different synthesis methods. Comparison of impurity profiles

In this work, the neutral and basic impurities found in the precipitate of MDMA(*)HCl are presented. MDMA.HCl was prepared by the most popular synthesis methods used in clandestine manufacture, i.e. safrole bromination, Leuckart method and reductive amination with various reducing agents: Al/Hg, NaBH(4), NaBH(3)CN. 3,4-Methylenedioxyphenyl-2-propanone (MDP-2-P), the starting material in Leuckart reaction and reductive amination, was prepared by two different synthesis methods, i.e. by isosafrole oxidation and MDP-2-nitropropene reduction. The extraction of impurities was performed under alkaline and neutral conditions. Impurity profiles were obtained using GC/MS. Each synthesis method is characterised by its own route specific impurities. The influence of pH on the extraction of synthesis markers from 3,4-methylenedioxymethamphetamine (MDMA) samples is discussed and comparison of the profiles of basic and neutral impurities is presented.     

Australian Federal Police seizures of illicit crystalline methamphetamine ('ice') 1998-2002: impurity analysis

Nineteen crystalline methamphetamine ('ice') seizures captured by the Australian Federal Police (AFP) at the Australian border between 1998 and 2002 were analysed. Using a modified gas chromatograph-mass spectrometry (GC-MS) impurity profiling approach of these samples we have identified >30 compounds associated with methamphetamine and/or its synthetic route. Major impurities detected include 1,2-dimethyl-3-phenylaziridine 8, dimethylamphetamine 14, N-formylmethamphetamine 24, N-acetylmethamphetamine 25, 1,3-dimethyl-2-phenylnaphthalene 32, 1-benzyl-3-methylnaphthalene 33 and methamphetamine dimer 34. These data are suggestive of ephedrine/pseudoephedrine as the main precursor of the 'ice' samples seized during 1998-2002. Additionally the two naphthalenes 32 and 33 further identified that 15 items in 9 seizures were produced via the more specific ephedrine/hydriodic acid/red phosphorus method. One sample comprised 75% dimethylamphetamine and 9.7% methamphetamine, representing the first Australian seizure of imported dimethylamphetamine reported.     

Carbon and Nitrogen Stable Isotope Analyses of Ephedra Plant and Ephedrine Samples and Their Application For Methamphetamine Profiling

In this study, stable isotope ratio analysis was used to track the precursor information of methamphetamine. The δ¹³C and δ¹⁵N values of 30 nature ephedra plants, 12 synthetic ephedrine/pseudoephedrine (ephedrine), 14 natural ephedrine, and 987 seized methamphetamine samples were measured and compared. Due to different weather and earth conditions, the δ¹³C and δ¹⁵N values of ephedra plants grown in the east and the west of Inner Mongolia showed great difference. The δ¹⁵N values of ephedra plants were consistent with related ephedrine extracted from them. Moreover, the criteria to infer the synthetic origin of ephedrine were set up after the analysis of natural and synthetic ephedrine samples. Finally, the precursor origins of 949 seized methamphetamine samples synthesized by Emde and Nagai method were tentatively inferred. Influenced by different preprecursors, the δ¹³C values of seized methamphetamine samples that synthesized from P2P also showed great difference, and this result is consistent with the reported data.     

Changes in methamphetamine impurity profiles induced by tert-butoxycarbonylation

Analysis of impurities in methamphetamine (MA) can be used to characterize MA seizures, investigate the relationship among MA seizures, and provide information on their synthetic routes. Recently, chemically derivatized MA, such as tert-butoxycarbonyl (t-Boc) MA, has been seized and attracted attention because routine forensic analysis methods may fail to correctly identify them. Chemical derivatization is a simple method for protection and deprotection of a compound, and protection of MA using t-Boc can be used to mask the MA. Although t-Boc derivatization might alter the impurity profile of MA, the actual changes in the impurity profile have not been investigated. In this study, changes in the MA impurity profile with tert-butoxycarbonylation were explored. MA and some typical impurities were derivatized using di-tert-butyl dicarbonate and water. Analysis of the impurities in five MA samples by gas chromatography showed that peaks both appeared and disappeared for the deprotected MA compared with the original MA. However, typical impurities important for characterizing MA seizures were conserved after derivatization and deprotection. Most of the new peaks were speculated to be contaminants introduced during derivatization and deprotection. A peak giving a mass spectrum similar to that of t-Boc MA was detected in the chromatograms of t-Boc MA and deprotected MA. Although the origin of this peak was not determined, it might be a marker for the MA involving tert-butoxycarbonylation. These results indicate that tert-butoxycarbonylation can alter the MA impurity profile; therefore, care is needed when interpreting results for derivatized MA.