利用彩色文件上的图文特征鉴别喷墨打印机品牌

目的通过彩色文件上的图文特征鉴别喷墨打印机的品牌。方法在体视显微镜下观察采用不同喷墨机理的惠普、佳能和爱普生三大品牌喷墨打印机打印的彩色图文。结果通过对彩色图文上六种墨迹形态特征的比较,发现三大品牌喷墨打印机打印的彩色图文存在明显差异。结论依据这六种特征对三大品牌的喷墨打印机进行鉴别。     

利用暗记特征鉴别彩色激光打印、复印文件

目的探讨激光打印机的暗记特征,为鉴别彩色激光打印、复印文件找到一种有效的方法。方法根据不同物质对光的反射特性及蓝色与黄色互补特性的原理,采用420nm左右蓝光照射方法,对部分品牌彩色激光打印、复印文件进行了初步分析研究,总结了暗记点阵形态特征、小点形态特征、出现位置特征和排列含义等特征。结果此方法对彩色激光打印、复印机具的种类鉴别和个体鉴别简便、有效。     

常用彩色激光打印机打印文件暗记特征的初步研究

目的收集当前我国常用不同品牌和型号的彩色激光打印机打印样本,研究打印文件上暗记特征的提取分析及其变化规律,探讨彩色激光打印文件暗记特征在鉴定实践中的应用及其在打印文件防伪措施中的价值。方法使用显微镜、文检仪及有关图像处理技术分别检验了彩色激光打印机的打印文件样本。结果彩色激光打印机打印文件上会出现暗记特征,且不同品牌的暗记特征出现规律、形态特征和点阵特征不同。结论暗记特征可作为初步鉴别彩色激光打印机品牌型号及打印时间的依据,具有防伪价值,但其在鉴定实践中还存在一定的局限性,有待进一步研究。     

激光显微共聚焦拉曼光谱仪对红色墨迹的研究

目的利用激光显微共聚焦拉曼光谱仪对文书中常见的红色墨迹材料进行表征,研究该方法对红色墨迹材料的区分能力。方法在785nm激发波长,50倍物镜条件下,对49种红色印文,以及9种彩色喷墨打印和13种彩色激光打印的红色墨迹材料进行拉曼光谱表征。结果通过对71种墨迹样品的谱图进行分析,可以发现,红色印文墨迹、喷墨打印红色墨迹及激光打印红色墨迹的拉曼光谱间均存在差异,同时,拉曼光谱可将这三种墨迹材料分别进一步区分。结论显微共聚焦激光拉曼光谱可对红色墨迹材料进行有效表征和区分。这一方法可对红色印文墨迹进行识别,并且可实现对伪造印文文件的鉴别。     

多光谱成像技术检验富士施乐C4300彩色激光打印复印一体机形成文件

目的研究富士施乐C4300彩色激光打印复印一体机形成文件的跟踪暗码,对富士施乐C4300彩色激光打印复印一体机形成文件进行识别。方法使用多光谱成像仪对6台富士施乐C4300彩色激光打印复印一体机形成的文件进行观察。结果该6台机器形成文件的跟踪暗码存在特征差异。结论通过跟踪暗码的差异,能够对富士施乐C4300彩色激光打印复印一体机形成文件进行识别。     

微束X射线荧光分析法鉴别激光打印机墨粉的研究

目的利用微束X射线荧光分析法（μ-XRF）研究激光打印机用墨粉的鉴别。方法利用μ-XRF对9台不同型号激光打印机用墨粉、对应的打印字迹、提取的字迹墨粉所含元素进行定性、半定量的分析。结果根据检出元素种类的不同,可将9台不同型号激光打印机用墨粉、对应的打印字迹、提取的字迹墨粉分成7类、4类、4类,区分率分别为94.4%、75%、69.4%。结论本研究所建立的μ-XRF鉴别激光打印机墨粉方法具有微区、原位无损检验等优点,对提高激光打印文件检验水平具有现实意义。     

彩色打印机打印印文的检验

随着现代科学技术的发展,犯罪分子的作案手段正在向技术化、智能化发展。涉及印章案件由手工私刻印章,到电脑排版刻章,发展到现在利用计算机复制,通过彩色打印机打印到文件上的印章印文的伪造犯罪活动。1计算机复制打印印文的产生首先将所需要的原始印章印文用扫描仪扫描或摄像到计算机图文处理系统,然后对扫描的印文进行计算机背景处理,最后利用彩色打印机打印到所需要的文件纸张上。彩色打印机(喷墨打印机、激光打印机)是由黑色和彩色墨盒组成,彩色墨盒内是由三原色组成,分别是黄色、品红色、青色。计算机打印出的复制印章印文为红色,红色…     

显微共焦拉曼光谱技术区分喷墨打印机打印的彩色图文墨迹

目的建立显微共焦拉曼光谱法区分喷墨打印机打印的彩色图文墨迹的方法。方法利用显微共焦拉曼光谱技术所具有微量、微区、原位分析及非破坏性等特点,对24种常见彩色墨水墨迹分别进行检验。结果品红色墨点墨迹成分归类区分效果最好,其次是黄色墨点,最后是蓝色墨点。结论采用显微共焦拉曼光谱技术对彩色打印墨迹进行不同颜色单点分析可大大提高喷墨打印机厂家型号的识别率,是一种有效的检测手段。     

高科技手段伪造印文的检验

根据检案中积累的经验和实验研究结果从伪造印文形成方法、伪造印文特点、伪造印文检验要点等几个方面，探讨了利用激光雕刻、彩色扫描打印、彩色复印等高科技手段伪造印文的检验方法。     

针式打印文件检验的探讨

针式打印机是一种常用的办公机具,从针式打印机的结构和打印原理出发,阐述了针式打印文件种类鉴别和个体识别所依据的打印特征,为针式打印文件的检验鉴定进行操作层面的探讨。     

Examination of spur marks found on inkjet-printed documents

In this paper, we propose the examination of spur mark evidence on inkjet-printed documents. Spur marks are tool marks created by the spur gears in the paper conveyance system of many inkjet printers. The relationship between printouts and printers were investigated by comparing the spur marks found on printed documents with reference spur marks sampled from known printers. The comparison was based on two characteristics of spur marks: pitch and mutual distance. These characteristics extracted the geometric features of spur marks and provided information on the type of spur gears and their location in the paper conveyance system. The spur marks on a printout matched the reference spur marks within three percent of the measured values. Spur marks were considered to be effective class characteristics to identify certain brands of inkjet printers since spur gears are used in many types of these machines.     

Classification algorithm using halftone features of counterfeit bills and CNN

With recent advancements in image processing and printing technology, home printers have improved in performance and grown more widespread. As such, they have been increasingly used in counterfeiting and forgery. Most counterfeit bills in Korea have been created using home scanners and printers. The identification of printer model is thus necessary to rapidly track down criminals and solve crimes. Household printers can be largely divided into inkjet and laser printers. These two types of printers print halftone textures instead of continuous images. This study proposed a technique of printer classification based on halftone textures that can be observed in printed documents. Since halftone textures are expressed as periodic lattices, the images were transformed via FFT, which is highly effective at expressing periodicity. ResNet, known for its superior gradient flow, was used for training. The experiment was conducted on 12 color laser jets and 2 inkjets. Scans of bills printed by each printer were used, and halftone texture analysis was performed on these images for printer model classification. Each image was cropped into several parts; one of the cropped parts was analyzed. The analysis showed that laser printers could be 100% distinguished from inkjet printers. An accuracy of 98.44% was achieved in make classification. When 50 cropped images were used instead of a single image, the technique achieved 100% accuracy in model classification. The proposed technique is non-destructive; it offers high accessibility and efficiency as it can be performed using a scanner alone, without requiring additional optical equipment.     

The use of an electrostatic detection device to identify individual and class characteristics on documents produced by printers and copiers--a preliminary study

The market is inundated with inkjet printers, laser printers, and photocopiers, which are often used in criminal activities. Many of these office machines are built by various manufacturers, hence they are constructed with different hardware designs (e.g. "rolling" and "grabbing" mechanisms) that have changed over the years due to technological advances. Examinations of printed documents that involve the chemical analysis of ink colorants and the identification of physical machine defects such as trash marks are essential for the forensic examiner, but new techniques are needed to more closely identify a machine model or group of models. An electrostatic detection device (EDD) provide forensic examiners with a nondestructive method to examine indentations on a document. In this work, an EDD is used to detect latent physical markings left on documents by printers and photocopiers. Seventeen inkjet printers, 12 laser printers, and 3 photocopy machines were used to produce test documents. Physical markings were detectable in the large majority of the documents and were reproducible 100% of the time.     

Differentiation of coloured inks of inkjet printer cartridges by thin layer chromatography and high performance liquid chromatography

Document examiners are frequently asked to determine whether or not a colour printout has originated from a particular inkjet printer. The printer can rarely be identified unless some unique defects or irregularities of the printer are present on the printout. However, it is possible to decipher the make and/or model of the printer by comparing the ink-profile of the questioned printout with that of a seized inkjet printer cartridge or from one in a database. This paper presents an overview of a systematic approach to characterising and discriminating the inks of different inkjet printer cartridges using thin layer chromatography (TLC) and high pressure liquid chromatography (HPLC) with multi-wavelength ultra-violet/visible (UV/Vis) detection. Ink samples from 23 different inkjet printer cartridges (including originals and substitutes) of different brands and colour printouts, printed by known printers were examined with newly developed chromatographic methods. Subsequently, a database of the ink-profiles was generated. The methods provide a useful tool for discriminating coloured inks in inkjet printer cartridges of different brands.     

Visualizing latent fingerprints on color-printed papers using ultraviolet fluorescence

Laser detection of latent fingerprints on a white paper has been performed, previously. Ultraviolet fluorescence from various kinds of printer toner and ink used for home printers were measured to study fluorescence imaging of fingerprints on a color-printed white paper. The experimental system consisted of a nanosecond pulsed tunable laser and a cooled CCD camera. Excitation wavelengths are 230 and 280 nm. Fourteen printers consisting of three color laser printers, three color inkjet printers, five monochrome laser printers, two monochrome copy machines, and a color copy machine were tested. Toner and ink of most printers exhibited fluorescence in the region from 360 to 550 nm. In most cases, clear fluorescence images were obtained by time-resolved imaging with a band-pass filter and 280-nm excitation. However for toners from laser color printers that showed strong fluorescence, better results were obtained with 230-nm excitation. Latent fingerprints on a photograph page and a black-character page of a newspaper were also imaged.     

喷墨打印机走纸步进量作为机种特征的实验研究

目的确定一个有助于识别喷墨打印机种的墨迹特征。方法对Epson、HP、Canon和Lexmark四大品牌的65种喷墨打印机的实验输出样本墨迹中重复出现的瑕疵进行分析。这些瑕疵包括：横向漏白条纹、重叠条纹和纵向对接错位等。结果相邻两个瑕疵之间的距离与打印机固有的走纸步进量直接相关。观测得出的走纸步进量既稳定又反映特定机种。结论将走纸步进量作为一个喷墨打印机种特征来利用具有较强的有效性和可行性。     

The Analysis of 3D Printer Dust for Forensic Applications,,

3D printers are becoming increasingly efficient and economical, and thus more widespread and easily accessible to consumers and businesses. They have been used to print nefarious objects such as guns and suppressors. Previous research has documented the release of dust particles during the printing process; however, little has been written about the morphology and chemical features that define the dust emitted by these printers. This study was undertaken to recover, analyze, and identify the dust produced during the printing process in the context of forensic trace evidence analysis. Samples were collected from a variety of 3D fused deposition modeler printers, representing both consumer and commercial grade models. This work focused on printers that use thermoplastic filaments composed of acrylonitrile butadiene styrene (ABS) or polylactic acid (PLA), two of the most commonly used filament polymers. Swabs were used to collect dust within the printer chamber and then processed to isolate the dust particles. Particles produced from ABS filaments are most easily recognized via light microscopy through a combination of color, morphology, and fluorescence. The composition of these particles can be confirmed through analysis by either FTIR or Raman microspectroscopy. These methods can also be used to identify ABS fillers and pigments within the printer dust particles. In contrast, dust from PLA printers consistently contained finer, submicron-sized particles that could be observed by field emission scanning electron microscopy. Because the size of the particles precludes their identification using vibrational spectroscopy methods, pyrolysis-GC-MS was used to confirm the presence of PLA.     

线聚焦显微激光拉曼光谱技术区分激光打印墨粉

目的利用Renishaw InVia激光显微拉曼光谱仪对打印墨粉进行区分。方法用785nm激发波长,采取线聚焦模式,50倍物镜条件下,测定了惠普等8个品牌25种硒鼓型号的30份激光打印机打印墨迹样品的拉曼光谱。结果 30种样品墨迹的谱图进行了分析,根据拉曼的异同,可将30种样品分为5大类。结论线聚焦显微激光拉曼光谱可用于区分不同种类激光打印墨粉。     

A Preliminary Study on Sources of Banding Artifacts for the Identification of Monochromatic Laser Printers,

The analysis of questioned documents printed with monochromatic toner has been a great challenge to document examiners. Banding artifacts, which are often perceived in the outputs of laser printers, could be a solution to the identification of printers. In this study, sources other than the gear transmission errors were discovered for some primary banding frequency components. By detecting the angular velocity variation of photosensitive drums and other rotating parts of the tested printers and comparing them with the banding signals extracted from the printouts, the authors located the sources of banding frequency components. It was shown that the sources of some primary and persistent banding signals, which were previously unknown, were traced to the periodic velocity variations of the motors or the timing belts. As inherent signatures, banding artifacts could be promising features for discriminating documents printed by individual laser printers.