Forensic Facial Approximation: Study of the Nose in Brazilian Subjects

Forensic facial approximation is an auxiliary method for human identification and allows facial recognition. The midface, that includes the nose, is vital for the recognition of a familiar face. The purpose of this study was to set hard tissue parameters to estimate nasal width, to test the method to estimate nasal width of Brazilians, and to analyze the relationship between nasal profile and facial type. A total of 246 computed tomography scans (183 females and 63 males) of adults were analyzed in Horos. Bone tissue measurements and facial type classification were performed on the skull scan. Nasal profile morphology was accessed through the tool 3D surface rendering. There was a difference around 3 mm from real to predicted nose through the method to estimate nasal width in Brazilians. So, the method may be used in forensic practice. Straight nose was associated with long face type.     

Anthropological Facial Approximation in Three Dimensions (AFA3D): Computer‐Assisted Estimation of the Facial Morphology Using Geometric Morphometrics

This study presents Anthropological Facial Approximation in Three Dimensions (AFA3D), a new computerized method for estimating face shape based on computed tomography (CT) scans of 500 French individuals. Facial soft tissue depths are estimated based on age, sex, corpulence, and craniometrics, and projected using reference planes to obtain the global facial appearance. Position and shape of the eyes, nose, mouth, and ears are inferred from cranial landmarks through geometric morphometrics. The 100 estimated cutaneous landmarks are then used to warp a generic face to the target facial approximation. A validation by re‐sampling on a subsample demonstrated an average accuracy of c. 4 mm for the overall face. The resulting approximation is an objective probable facial shape, but is also synthetic (i.e., without texture), and therefore needs to be enhanced artistically prior to its use in forensic cases. AFA3D, integrated in the TIVMI software, is available freely for further testing.     

头面部软组织厚度的观测报告

选用30具成尸,在头面部设34个测量点(中线上14、侧面20),测了各点软组织的厚度;观测了眼在眶中的位置、眼裂的内外径、外耳厚、上下高、前后宽及纵轴斜向前下方的角度、口裂的宽度和上下唇的厚度、外鼻的上下长,鼻底的宽,鼻尖的高和鼻孔的口径等,为面貌复原、整容、头面部软组织损伤后的整形修复提供解剖学资料。     

Validation of the New Interpretation of Gerasimov's Nasal Projection Method for Forensic Facial Approximation Using CT Data,

The most common method to predict nasal projection for forensic facial approximation is Gerasimov's two‐tangent method. Ullrich H, Stephan CN (J Forensic Sci, 2011; 56: 470) argued that the method has not being properly implemented and a revised interpretation was proposed. The aim of this study was to compare the accuracy of both versions using a sample of 66 postmortem cranial CT data. The true nasal tip was defined using pronasale and nasal spine line, as it was not originally specified by Gerasimov. The original guidelines were found to be highly inaccurate with the position of the nasal tip being overestimated by c. 2 cm. Despite the revised interpretation consistently resulting in smaller distance from true nasal tip, the method was not statistically accurate (p > 0.05) in positioning the tip of the nose (absolute distance >5 mm). These results support that Gerasimov's method was not properly performed, and Ullrich H, Stephan CN (J Forensic Sci, 2011; 56: 470) interpretation should be used instead.     

FACE‐R—A 3D Database of 400 Living Individuals' Full Head CT‐ and Face Scans and Preliminary GMM Analysis for Craniofacial Reconstruction

In the past, improvements in craniofacial reconstructions (CFR) methodology languished due to the lack of adequate 3D databases that were sufficiently large and appropriate for 3‐dimensional shape statistics. In our study, we created the “FACE‐R” database from CT records and 3D surface scans of 400 clinical patients from Hungary, providing a significantly larger sample that was available before. The uniqueness of our database is linking of two data types that makes possible to investigate the bone and skin surface of the same individual, in upright position, thus eliminating many of the gravitational effects on the face during CT scanning. We performed a preliminary geometric morphometric (GMM) study using 3D data that produces a general idea of skull and face shape correlations. The vertical position of the tip of the (soft) nose for a skull and landmarks such as rhinion need to be taken into account. Likewise, the anterior nasal spine appears to exert some influence in this regard.     

Suicide by Close-Range Gunshot Wound to the Bridge of the Nose

Suicidal gunshot wounds to the nasal bridge are rare, particularly at close range (defined as muzzle of the weapon not touching the skin surface, but near enough to deposit soot and stippling). Previously reported suicidal gunshot wounds to the nose have been through the left nostril (Forensic Sci Int 1995;71(1):25–31; J Forensic Radiol Imag 2013;1(2):63–7). The death of a 26-year-old man with a close-range gunshot wound to the bridge of the nose was deemed suicide due to history, scene, and autopsy findings. These findings included previous suicidal ideation, texted and written notes, the decedent's cross-legged position seated on the floor, the trajectory of the bullet through his head and into the ceiling fan and roof above him, and acute alcohol intoxication. This decedent may have been intending a hard contact forehead location but inadvertently fired the gun into the bridge of his nose while bending forward, prior to contact.     

Automated shape annotation for illicit tablet preparations: A contour angle based classification from digital images

In order to facilitate forensic intelligence efforts in managing large collections of physical feature data pertaining to illicit tablets, we have developed an automated shape classification method. This approach performs categorical shape annotation for the domain of illicit tablets. It is invariant to scale, rotation and translation and operates on digital images of seized tablets. The approach employs two processing levels. The first (coarse) level is being based on comparing the contour curvature space of tablet pairs. The second (fine) level is a rule based approach, implemented as a classification tree, that exploits characteristic similarities of shape categories. Annotation is demonstrated over a collection of 169 tablets selected for their diverse shapes with an accuracy of 97.6% when 19 shape categories are defined.     

A novel method of automated skull registration for forensic facial approximation

Modern forensic facial reconstruction techniques are based on an understanding of skeletal variation and tissue depths. These techniques rely upon a skilled practitioner interpreting limited data. To (i) increase the amount of data available and (ii) lessen the subjective interpretation, we use medical imaging and statistical techniques. We introduce a software tool, reality enhancement/facial approximation by computational estimation (RE/FACE) for computer-based forensic facial reconstruction. The tool applies innovative computer-based techniques to a database of human head computed tomography (CT) scans in order to derive a statistical approximation of the soft tissue structure of a questioned skull. A core component of this tool is an algorithm for removing the variation in facial structure due to skeletal variation. This method uses models derived from the CT scans and does not require manual measurement or placement of landmarks. It does not require tissue-depth tables, can be tailored to specific racial categories by adding CT scans, and removes much of the subjectivity of manual reconstructions.     

Unusual suicidal smothering by means of multiple loops of adhesive gummed tape

In suicidal asphyxia smothering is very rare, especially when caused by winding strips of adhesive tape around the head to cover the nose and mouth. The authors report a very unusual case in which the deceased, a 66-year-old man, was found with two strips of tape wound around his head: the first, more superficial tape was wrapped six times and the second was wrapped nine times. Only integration of the crime scene data with those of the autopsy and the patient's psychological profile enabled identification of the event as suicide.     

Three-Dimensional Prediction of the Nose for Facial Approximation in a Thai Population

Most of the previous studies about nose prediction were concentrated only some landmarks of the nose. This study aimed to generate prediction equations for ten landmarks of the nose in the midline and alar regions for forensic facial approximation. The six midline landmarks were the sellion, nasion–pronasale posterior, nasion–pronasale anterior, pronasale, nasal drop, and subnasale. The four landmarks of the alar region were the alare, superior alar groove, posterior alar groove, and inferior alar groove. We used the skull landmarks in the nasal, zygomatic, and maxillary bone to predict the landmarks of the nose. Cone-beam computed tomography scans of 108 Thai subjects with normal BMI and age ranging from 21.0 to 50.9 years were obtained in a sitting position. The data were converted into three-dimensional (3-D) images of the skull and face. The Cartesian coordinates of the landmarks of the skull and nose were used to formulate the multiple regression equations. The formulated equations were tested in 24 new subjects. The mean differences in the predicted midline landmarks varied between −0.4 mm and 0.5 mm, whereas those for bilateral landmarks varied between −1.0 mm and 1.4 mm. In conclusion, the prediction equations formulated here will be beneficial for facial approximation of the nose in a Thai population.     

Descriptive morphological features of the nose--an assessment of their importance for plastic reconstruction

On a series of lateral radiographs of 154 males and 199 females from Vienna, Austria, 3 qualitative morphological features of the external nose were recorded. Their relationship to craniometric dimensions, age, and the contour of the nasal bones was tested using Wilks' stepwise discriminant analyses. All tests gave significant results at the 1% probability level, but, overall, correct assignment of the features to their categories did not exceed 61%. Although height dimensions were used for discrimination in females, the prominence of the nasal bones and age appeared to be the most important discriminating variables in both sexes. Analyses further revealed that the nasal bridge and the direction of the nasal septum are highly correlated, whereas the tip of the nose seemed to be independent; this may reflect the dependence of the latter on exogenous influences, especially nutrition. It was demonstrated that the profile line of the external nose does not follow its underlying bony structures, that is, the profile line of the nasal bones. Thus, the present study showed that obtaining soft tissue thicknesses alone is not sufficient for successful facial reconstruction, but that a more holistic approach should be used to elucidate the relationships between soft tissue cover and the underlying hyaline and bony structures.     

中国北方汉族女性鼻尖位置的推定

本文对49例沈阳地区汉族女性(年龄范围为17～19岁),头面部侧位X光片上的鼻尖点及其与颅骨的相互关系进行了研究。在X光片上所测得的数据,在IBM-PC/XT电子计算机上进行多元逐步回归分析,得出推定沈阳地区汉族女性(17～19岁)鼻尖位置的回归方程。其回归误差在2mm以内的占71.43～77.55％。     

Comparison Among Manual Facial Approximations Conducted by Two Methodological Approaches of Face Prediction

This study verified the difference between two methods of forensic facial approximation (FFA) regarding recognition and resemblance rates. Three‐dimensional models of skulls were obtained from computerized tomography (CT) scans of two subjects (targets). Two manual FFAs were performed for each target, by applying two different guidelines for the facial structures (what we called “American method” (AM) and “Combined method” (CM)). Unfamiliar assessors evaluated the sculptures by recognition and resemblance tests. The AM was that which allowed more correct responses of recognition and higher resemblance's scores for the male target (p < 0.001). Regarding guidelines for modeling characteristics of the face, the ones that are practical and easily performed for sculptures, such as the length of the anterior nasal spine multiplied by 3 for nose prediction, may offer better results in terms of resemblance.     

The placement of the human eyeball and canthi in craniofacial identification

An accurate understanding of the spatial relationships between the deep and superficial structures of the head is essential for anthropological methods concerned with the comparison of faces to skulls (superimposition) or the prediction of faces from them (facial approximation). However, differences of opinion exist concerning: (i) the position of the eyeball in planes other than the anteroposterior plane and (ii) the canthi positions relative to the bony orbital margins. This study attempts to clarify the above relationships by dissection of a small sample of adult human cadavers (N = 4, mean age = 83 years, s = 12 years). The most notable finding was that the eyeballs were not centrally positioned within the orbits as the more recent craniofacial identification literature expounds. Rather, the eyeballs were consistently positioned closer to the orbital roof and lateral orbital wall (by 1-2 mm on average); a finding consistent with the earlier anatomical literature. While these estimation errors are small ipsilaterally, several factors make them meaningful: (i) the orbital region is heavily used for facial recognition; (ii) the width error is doubled because the eyes are bilateral structures; (iii) the eyes are sometimes used to predict/assess other soft tissue facial structures; and (iv) the net error in facial approximation rapidly accumulates with the subsequent prediction of each independent facial feature. While the small sample size of this study limits conclusive generalizations, the new data presented here nonetheless have immediate application to craniofacial identification practice because the results are evidence based. In contrast, metric data have never been published to support the use of the central positioning guideline. Clearly, this study warrants further quantification of the eyeball position in larger samples and preferably of younger individuals.     

Preliminary study of hair form of Japanese head hairs using image analysis

The use of average curvature measurements for the forensic comparison of curly hairs has been reported, but a method, in which various types of hair form are quantitatively examined and objectively interpreted for hair comparison, has not been reported to date. In the present study, numerical data on hair form from Japanese subjects were obtained by image analysis and a morphological comparison of these head hairs was investigated. Head hairs obtained from eight Japanese males were measured for length (L), distance (D) and area (A) using a Kontron Imaging System KS400. From the three measurements mentioned above, three indexes, L/D, A/D and 2(A/L), were examined. The inter-individual variations for each value were investigated by a t-test and the availability of six values for the forensic comparison of hair form was evaluated by a stepwise linear discrimination analysis. Six values obtained from hair form by an image analysis showed large intra-individual variations. However, these six values were found to be useful for discriminating between two individuals, since the six values showed larger inter-individual variations than intra-individual variations. Discrimination on each comparison using a stepwise linear discrimination analysis was performed for some of the values and the results indicated conspicuous inter-individual variations between the two individuals. On 11 of 28 comparisons, 30 hairs from one individual could be completely distinguished from hairs of another individual, when a two-way comparison was employed. These results confirm that hair form could be quite useful in the forensic comparison of hair morphology, and suggest that numerical data obtained from hair form by image analysis are very important values for constructing a screening procedure for evidential hairs. The use of an objective measure of hair form will be especially useful for Japanese head hairs since they are generally thought to show very limited variation in morphological features.     

ALLOCATING CUSTODIAL RESPONSIBILITIES AT DIVORCE

The American Law Institute's Principles of the Law of Family Dissolution: Analysis and Recommendations contains a set of detailed reform proposals for the allocation of custodial responsibility for children among parents, including the approximation rule . This article examines two bodies of social science evidence that explicitly or implicitly were used to justify the approximation rule, attachment theory and research and research on the impact on children of shared parenting arrangements subsequent to divorce . These two bodies of evidence used to justify the approximation rule are reviewed and evaluated to provide an assessment of its social-based rationales.     

Computerized craniofacial reconstruction using CT-derived implicit surface representations

In forensic craniofacial reconstruction, facial features of an unknown individual are estimated from an unidentified skull, based on a mixture of experimentally obtained guidelines on the relationship between soft tissues and the underlying skeleton. In this paper, we investigate the possibility of using full 3D cross-sectional CT images for establishing a reference database of densely sampled distances between the external surfaces of the skull and head for automated craniofacial reconstruction. For each CT image in the reference database, the hard tissue (skull) and soft tissue (head) volumes are automatically segmented and transformed into signed distance transform (sDT) images, representing for each voxel in this image the Euclidean distance to the closest point on the skull and head surface, respectively, distances being positive (negative) for voxels inside (outside) the skull/head. Multiple craniofacial reconstructions are obtained by first warping each reference skull sDT maps to the target skull sDT using a B-spline based free form deformation algorithm and subsequently applying these warps to the reference head sDT maps. A single reconstruction of the target head surface is defined as the zero level set of the arithmetic average of all warped reference head sDT maps, but other reconstructions are possible, biasing the result to subject specific attributes (age, BMI, gender). Both qualitative and quantitative tests (measuring the similarity between the 3D reconstructed and corresponding original head surface) on a small (N = 20) database are presented to proof the validity of the concept.     

Position Effect on Facial Soft Tissue Depths: A Sonographic Investigation

The head is positioned erect for an approximation; yet most facial soft tissue depths (FSTD) used are measured from supine subjects. Depth difference might be significant, but there is a paucity of data to verify. This study compared erect and supine values for 17 landmarks from 30 healthy New Zealand (European population affinity) women (18–30 or 40–55 years) in erect then supine positions. Height, weight, and sonographic FSTD data, totaling 1020 measurements, were obtained. Three midline and seven averaged bilateral values were compared using ANOVA, p values, and Pearson's correlations. Correlative strength of age and body mass index, BMI (kg/m²), was determined by values. Results showed averaged erect and supine differences were significant for four of ten FSTDs. Between individuals, difference was various and not unidirectional. In conclusion, depth differences were observed but not all significant or unidirectional, BMI significantly influenced nine FSTD values, but age group did not.     

Ballistic characterization of the Remington Premier Copper Solid sabot shotgun slug

We evaluated the impact and penetration characteristics of the Remington Copper Solid sabot shotgun slug with standardized ballistic tests and used this information to predict tissue wounding patterns. This unique ammunition, first distributed in 1993, is composed of a solid copper, hollow-point slug with longitudinal slots cut into the nose. The slug is fitted into a hard plastic sabot with 8 finger-like projections and loaded into a shotgun shell with two plastic wads separating it from the underlying gunpowder charge. The ammunition was fired through a 12-gage shotgun using a rifled barrel, a smooth-bore barrel with rifled choke, and a smooth-bore barrel with a smooth modified choke into targets consisting of poster board and 10% ballistic gelatin at a variety of distances. The copper slug and plastic sabot created single 8-fingered asterisk-shaped defects in the poster board when fired at distances of less than 7 to 9 ft (approximately 2 to 3 m). All three barrel types performed similarly. At greater distances, the sabot impacted the targets separately from the slugs and created variably shaped defects that reflected base-first, nose-first, and side-first impacts. Increasing muzzle-to-target distances generally increased the impact distances between the slug and sabot. There was no predictable relationship between the sabot and slug impact points for any of the three barrel types. With each barrel tested, the wads created separate defects from the slug at distances greater than 5 ft (1.5 m). The distances between the slug and the wad impact points increased with increasing muzzle-to-target distances up to 40 ft (12 m), after which the wads generally no longer struck the targets. The slug created atypical defects at distances between 7 and 150 ft (approximately 2 to 45 m), probably due to yawing or tumbling. When the slug impacted the gelatin block in a nose-first orientation, the slotted nose portion tended to fragment and radially deposit pieces in the gelatin that were visible on radiographs. When the slug struck the gelatin target in a side-first orientation, it passed through the gelatin intact. The slug, sabot, and wads of this unique projectile separate and create independent impact points in a stereotypical manner independent of barrel type. This pattern of separation allows estimates to be made of ranges of fire. Wounds created in human tissues by this ammunition would likely have similar asterisk-shaped configurations, and nose fragments may be deposited in tissues and seen radiographically. Rectangular wounds created by the tumbling or yawing slug might be mistaken for intermediate target wounds.