Optimized Development of Sebaceous Fingermarks on Nonporous Substrates with Conformal Columnar Thin Films

A form of physical vapor deposition, called the conformal‐evaporated‐film‐by‐rotation (CEFR) method, was optimized for the conformal deposition of columnar thin films (CTFs) on sebaceous fingermarks. Relying on the surface topology of the fingermark, the CTF development technique is different from traditional development techniques. After the optimization of the development conditions, the CTF development technique was found to be superior to traditional development methods on several nonporous substrates: the smooth side of Scotch^® Multitask, Gorilla^®, and Scotch^® Duct tapes; clear and black soft plastics; stained and sealed walnut and cherry woods; partial bloody fingermarks on stainless steel; and discharged cartridge casings. It was equally as good as other development techniques on other substrates, but worse on a few. The optimization study is expected to assist in designing a mobile CEFR apparatus capable of on‐scene development of fingermarks.     

Columnar‐Thin‐Film‐Assisted Visualization of Depleted Sebaceous Fingermarks on Nonporous Metals and Hard Plastics

A fingermark on a nonporous substrate can be developed by depositing a columnar thin film (CTF) on it, but the CTF technique's sensitivity for low‐quality fingermarks is unknown. The optimized CTF and traditional development of several depletion series of sebaceous‐loaded fingermarks were compared using a split‐print methodology as well as subjective and objective grading schemes, in a limited laboratory trial. CTF development was superior to development with selected traditional techniques on brass, anodized aluminum, black acrylonitrile butadiene styrene (ABS), and white nylon. On white ABS and black nylon, the CTF technique performed poorly but still as well as the best‐performing traditional development technique. The CTF technique was more sensitive on brass and anodized aluminum than, and as sensitive on the four hard plastics and stainless steel as, the best‐performing traditional technique. Thus, the CTF technique is useful to develop friction‐ridge detail from limited fingermark residue on some smooth substrates.     

Solid-state acquisition of fingermark topology using dense columnar thin films

Various vacuum techniques are employed to develop fingermarks on evidentiary items. In this work, a vacuum was used to deposit columnar thin films (CTFs) on untreated, cyanoacrylate-fumed or dusted fingermarks on a limited selection of nonporous surfaces (microscope glass slides and evidence tape). CTF deposition was not attempted on fingermarks deposited on porous surfaces. The fingermarks were placed in a vacuum chamber with the fingermark side facing an evaporating source boat containing either chalcogenide glass or MgF(2). Thermal evaporation of chalcogenide glass or MgF(2) under a 1 μTorr vacuum for 30 min formed dense CTFs on fingermark ridges, capturing the topographical features. The results show that it is possible to capture fingermark topology using CTFs on selected untreated, vacuumed cyanoacrylate-fumed or black powder-dusted nonporous surfaces. Additionally, the results suggested this might be a mechanism to help elucidate the sequence of deposition.     

A Preliminary Study on Vacuum Metal Deposition as a Standalone Method for Enhancement of Fingermarks on Ballistic Brass Materials

In order to assess the efficacy of vacuum metal deposition (VMD) as a technique to develop fingermarks on ballistic metallic surfaces, a preliminary study using six donors (three male & three female) was conducted. Using a sequential metal deposition process, two metal combinations were studied—gold/zinc and silver/zinc. Results indicate the potential of this technique, by developing identifiable fingermarks on brass metal disks aged from a few days up to more than a month old. As the development of fingermarks on fired (brass) cartridge cases is an area of interest, a further study was conducted where a total of 20 fingermarks were deposited on cases. After firing, second level fingermark characteristics were successfully observed on cartridge cases highlighting its potential as a fingermark enhancement method for ballistic brass materials. Further work is required to fully evaluate the VMD process and its reliability as a fingermark enhancing method on ballistic surfaces.     

Nanoscale analysis of the interaction between cyanoacrylate and vacuum metal deposition in the development of latent fingermarks on low-density polyethylene

Vacuum metal deposition (VMD) has been previously demonstrated as an effective development technique for latent fingermarks and in some cases has been shown to enhance prints developed with cyanoacrylate (CA) (superglue) fuming. This work utilizes scanning electron microscopy (SEM) to investigate the interactions of the two development techniques when applied to latent fingermarks on low-density polyethylene. CA is shown to act principally on the eccrine deposits around sweat pores, where polymerization results in long polymer fibrils a few 100 nm in width. Subsequent VMD processing results in additional areas of development, for example, between pores. However, the primary mode of deposition of zinc is by interaction with the polymerized CA, the fibrils of which become decorated with zinc nanoparticles. Areas with limited CA deposition and no significant polymerization are also enhanced with the VMD process, resulting in increased print development.     

Vacuum metal deposition: visualisation of gold agglomerates using TEM imaging

Vacuum metal deposition (VMD) is a well-established technique that can be used for the development of latent fingermarks on a range of polymer surfaces, including polyethylene (PE) bags exposed to harsh environmental conditions. The technique has also proved to be effective on difficult semi-porous surfaces such as the polymer banknotes in circulation in Australia and in an increasing number of other countries. VMD is a two-stage technique. In the first stage, a small amount of gold is deposited under high vacuum onto the exhibit. This is then followed by the deposition, onto the gold layer, of a much thicker layer of zinc. Normal VMD development is characterised by zinc depositing all over the surface except on the fingermark ridges themselves. A phenomenon of reverse development (zinc on the ridges but not on the surface) has been reported by many authors. Recent studies indicated that this phenomenon might occur on low-density polyethylene (LDPE) when the amount of deposited gold is above an optimum quantity. The results suggested that the size of the gold agglomerates formed on the surface of the polymer plays a critical role. This preliminary study was aimed at visualising, by transmission electron microscopy (TEM), the formation of gold agglomerates on polymer surfaces to gain an appreciation of how the density and size of these agglomerates changes with an increasing amount of evaporated gold.     

A comparison of the use of vacuum metal deposition versus cyanoacrylate fuming for visualisation of fingermarks and grab impressions on fabrics

Both vacuum metal deposition (VMD) and cyanoacrylate fuming (CAF) are techniques used to visualise latent fingermarks on smooth non-porous surfaces such as plastic and glass. VMD was initially investigated in the 1970s as to its effectiveness for visualising prints on fabrics, but was abandoned when radioactive sulphur dioxide was found to be more effective. However, interest in VMD was resurrected in the 1990s when CAF was also used routinely. We now report on studies to determine whether VMD or CAF is the more effective technique for the detection of marks on fabrics. Four different fabrics, nylon, polyester, polycotton and cotton, were utilised during this study, along with 15 donors who ranged in their age and ability to leave fingermarks, from good to medium to poor, thus reflecting the general population. Once samples were collected they were kept for a determined time (1, 2, 3, 4, 5, 6, 7, 14, 21 or 28 days) and then treated using either the gold and zinc metal VMD process or standard cyanoacrylate fuming.The smoother fabrics, such as nylon, consistently produced greater ridge detail whereas duller fabrics, like cotton tended only to show empty prints and impressions of where the fabric had been touched, rather than any ridge details. The majority of fabrics did however allow the development of touch marks that could be targeted for DNA taping which potentially could lead to a DNA profile. Of the two techniques VMD was around 5 times more effective than CAF, producing a greater amount of ridge detail, palmar flexion creases and target areas on more samples and fabrics.     

Novel O‐propyl,S‐propyl,and N‐propyl substituted 1,4‐naphthoquinones and 1,4‐anthraquinones as potential fingermark development reagents for porous surfaces

Lawsone is a 2‐substituted‐1,4‐naphthoquinone derivative, which has been proposed as an alternative to the reagents currently used for fingermark detection on porous surfaces. 2‐substituted‐anthraquinones, which contain an additional conjugated benzene ring, have a similar chemical structure to that of lawsone. In this study, a new series of 2‐substituted‐1,4‐naphthoquinones and 2‐substituted‐1,4‐anthraquinones were synthesized and completely characterized by¹H NMR,¹³C NMR, IR, and HPLC‐TOF/MS analyses. All newly synthesized 2‐substituted‐1,4‐quinones were investigated for their ability to develop latent fingermarks on porous surfaces, and this ability was compared with that of lawsone. Each fingermark developed was graded using an established method; thus, quantitative data were attributed to each fingermark. It has been demonstrated that the 1,4 ‐ quinones react with amino acids present in latent fingermarks on selected paper surfaces to produce faint yellow‐orange impressions, which exhibit strong photoluminescence when illuminated with a forensic light source at 440 nm and observed through a red filter. None of the compounds caused background darkening. The results obtained were generally similar to those of lawsone, however, 8‐dibromo‐2‐(propylamino)naphthalene‐1,4‐dione and 5,8‐dibromo‐2‐(propylthio)naphthalene‐1,4‐dione yielded better results for copier paper and colored (blue) copier paper used in this analysis. To the best of our knowledge, this is the first study to examine the role of 1,4‐anthraquinone derivatives as potential fingermark development reagents. The results indicate that 1,4‐quinones have a potential to be used as reagents for enhancement of latent fingermarks.     

Development of Latent Fingermarks on Surfaces of Food‐A More Realistic Approach

Latent fingermark developing methods from food (mandarin, egg, banana, apple, potato, carrot, eggplant, onion, bell pepper, and tomato) surface has been studied by 10 methods, including powdering method, small particle reagent method, and cyanoacrylate fuming method. The foods were stored under two conditions (room temperature and refrigerator) before fingermark deposition and aged for 2, 24, 48, and 72 h before fingermark development. In most of the food surfaces used in this study, cyanoacrylate fuming with 80% relative humidity was superior to the powder or small particle reagent methods. The quality of the fingermarks varied depending on the storage conditions before the fingermark deposition (in the refrigerator or at ambient temperature) and the time elapsed since the fingermark deposition. However, the storage conditions before the fingermark deposition and the time elapsed since the fingermark deposition did not show any correlation with the quality of the fingermark.     

Visualisation of fingermarks and grab impressions on fabrics. Part 1: gold/zinc vacuum metal deposition

Vacuum metal deposition (VMD) is a highly sensitive technique originally introduced for detecting latent fingermarks on smooth non-porous surfaces such as carrier bags, plastics and glass. The current study explores whether VMD can be used in the examination of clothing from physical and sexual assault cases in order to visualise identifiable fingermark ridge detail and/or palmar flexion crease detail, thus allowing potential areas to be indicated for DNA swabbing and/or to determine the sequence of events. Four different fabrics were utilised during this study - nylon, polyester, polycotton and cotton, along with 15 donors who ranged in their age and propensity to leave fingermarks, from good to medium to poor as determined by results obtained from test runs using paper and plastic carrier bags processed with VMD. Once samples were collected they were kept for a determined time (1, 2, 3, 4, 5, 6, 7, 14, 21 or 28 days) and then treated using the gold/zinc metal VMD process. From the results, it appears that greater ridge detail is visible on the smoother non-porous fabrics, such as nylon whereas on rougher porous fabrics, such as cotton, only empty prints and impressions, rather than any ridge details, were visible. All fabrics did however allow the development of touch marks that could be targeted for DNA taping thus potentially leading to a DNA profile and possible identification of a suspect.     

Evaluation of Lumicyano™ cyanoacrylate fuming process for the development of latent fingermarks on plastic carrier bags by means of a pseudo operational comparative trial

There are a number of studies discussing recent developments of a one-step fluorescent cyanoacrylate process. This study is a pseudo operational trial to compare an example of a one-step fluorescent cyanoacrylate product, Lumicyano™, with the two recommended techniques for plastic carrier bags; cyanoacrylate fuming followed by basic yellow 40 (BY40) dyeing and powder suspensions. 100 plastic carrier bags were collected from the place of work and the items were treated as found without any additional fingermark deposition. The bags were split into three and after treatment with the three techniques a comparable number of fingermarks were detected by each technique (average of 300 fingermarks). The items treated with Lumicyano™ were sequentially processed with BY40 and an additional 43 new fingermarks were detected. Lumicyano™ appears to be a suitable technique for the development of fingermarks on plastic carrier bags and it can help save lab space and time as it does not require dyeing or drying procedures. Furthermore, contrary to other one-step cyanoacrylate products, existing cyanoacrylate cabinets do not require any modification for the treatment of articles with Lumicyano™. To date, there is little peer reviewed articles in the literature on trials related to Lumicyano™ and this study aims to contribute to fill this gap.     

An efficient strategy to detect latent fingermarks on metallic surfaces

The aim of this work is to use metal sputtering for the development of latent fingermarks on metallic surfaces by taking advantage of the prints' topography. In order to promote the preferential deposition onto fingerprints' ridges the deposition parameters should be optimized. After a previous selection, copper and gold thin films were deposited by magnetron sputtering onto stainless steel substrates where fingermarks were intentionally placed. After optimizing the deposition parameters, the influence of the fingermarks' age was studied. The quality of the developed fingermarks was evaluated visually and through optical and scanning electron microscopy. The morphology of the copper and gold thin films was examined by high resolution scanning electron microscopy. The preferential magnetron sputtering deposition of copper and gold thin films, 20-30 nm thick, allows latent fingermarks to be successfully developed. The gold films are more promising, especially for detecting non-fresh fingermarks and for conserving the developed marks. It was possible to detect the contours of the ridges and localize minutiae features in a one-month aged impression developed by gold deposition. These films present discontinuous surface and columnar cross-sections, while copper thin films have a featureless morphology.     

Enhanced Visualization of Latent Fingermarks on Rough Aluminum Surfaces Using Sequential Au and Zn/ZnS/ZnO Depositions

Detection and visualization of fingermarks on rough and diffuse surfaces is a relatively challenging task. We succeeded in developing latent fingermarks on scratched and rough aluminum surfaces by sequential deposition of a thin layer of gold followed by one of zinc or zinc‐based compounds on the fingermarks. The best image enhancement was achieved with sequential Au and ZnS depositions. Using this combination, we could enhance the visualization of latent fingermarks aged over 65 days in normal conditions. The optical reflectance from the fingermarks with the deposited layers of metal/dielectric is analyzed as a stratified medium. Significant contrast in the reflectance from the regions of the ridges and the valleys of the fingermark would enhance the visualization. Our results show that the Au and ZnS bi‐layer combination can have a large reflection contrast and improved fingermark visualization at wavelengths corresponding to the green light for specific thickness of ZnS.     

An investigation into the use of a portable cyanoacrylate fuming system (SUPERfume®) and aluminum powder for the development of latent fingermarks

Abstract: Few techniques offer “in situ” methods of friction ridge skin mark development. “In situ” development reduces mark transportation, degradation, and often cost. The effectiveness of cyanoacrylate fuming using the SUPERfume^® and dusting with aluminum powder for latent fingermark development on several nonporous surfaces, stored in various temperature environments for time periods up to 52 weeks, was investigated. Five thousand and four hundred latent fingermarks were deposited under controlled conditions and graded. The results suggested that cyanoacrylate fuming (SUPERfume^®, Foster and Freeman, U.K.) was more effective at developing latent fingermarks on textured and smooth plastic surfaces and for marks stored in temperatures of 37°C, whereas aluminum powder was more effective on glass, enameled metal paint, and varnished wood, and for storage temperatures below 20°C. There were no significant benefits to using either technique for marks older than 24 h, but it was possible to develop fingermarks following 52 weeks of storage using both techniques.     

Degradation of polymer banknotes through handling,and effect on fingermark visualisation

The surface structure of mint (as-issued) and handled polymer five pounds sterling banknotes was studied by atomic force microscopy and laser scanning confocal microscopy. A total of 1856 fingermarks on mint and handled banknotes from four different issuing banks (Bank of England, Bank of Scotland, Royal Bank of Scotland and Clydesdale Bank) were visualised with Vacuum Metal Deposition (VMD), Cyanoacrylate Fuming (CAF) and, on Clydesdale Bank notes, magnetic fluorescent powder. VMD was significantly more effective in developing fingermarks on handled banknotes, across all the banks studied, although effectiveness varied with issuing bank. For example, on handled Bank of England notes 45% of marks showed ridge detail with VMD development and 28% with CAF; for Bank of Scotland handled notes success rates were 17% with VMD and 1% with CAF. Microscopy of degraded banknotes showed the loss of intaglio printing and the formation of a cracked surface structure in the handled notes. These features can lead to the trapping of powder, or contaminants, increasing quantity of development agent in fingermark background between the ridges, decreasing contrast and decreasing performance of powder-based fingermark development techniques. These same features can restrict the migration of components of the fingermark, preventing fingermarks degrading through spread of material and thus reducing potential formation of empty prints, so that VMD development is not adversely affected.     

Further Pseudo-Operational Trials with the Lumicyano Double- and Co-Fuming Process for the Detection of Latent Fingermarks

This study presents a number of pseudo-operational trials on plastic bags investigating the double- and co-fuming process of a one-step fluorescent cyanoacrylate (Lumicyano^TM) in comparisons with the two-step process with basic yellow 40 (BY40) staining for the detection of latent fingermarks. The results demonstrate that both Lumicyano solution and dye contribute to the increased detection of latent fingermarks during the double-fuming process (trial 1). Co-fuming the Lumicyano solution and dye separately (at a concentration of 8%) but simultaneously was less effective than 8% Lumicyano (trial 2). Co-fuming Lumicyano 8% and an additional 8% Lumicyano dye by weight was more effective than Lumicyano 8% (trial 3), possibly due to increased fluorescent material deposition during co-fuming allowing for better visualization. The use of BY40 after Lumicyano resulted in a considerable increase in detected fingermarks.     

Time is Money or Money is Time? A Rapid Operational Sequence for Detecting Fingermarks on Polymer Banknotes

Banknotes are often found in high-profile crimes such as armed robberies, bribery, and terrorist activity. However, such exhibits present a challenge to forensic operatives regarding fingermarks development, due to their mass quantities, potential for fingermarks on both sides, and their unique complex background in terms of color, irregular patterns, and topography. Hence, the standard development protocols become inefficient, due to the difficulty in achieving high contrast images over the background. This study focused on finding an operational sequence that would minimize the time of work on polymer banknotes, in terms of both development and image processing. Thirty-two fingermarks were developed by vacuum metal deposition (VMD), black magnetic powder, and cyanoacrylate fuming (CA) followed by visualization and imaging by reflected short-wave UV (RUVIS) (96 in total), showing a distinct advantage to the CA and RUVIS imaging over the other two techniques with a 75% success rate in the dark and high background regions, due to its physical principle which neutralizes high background interference. The images were then scanned by the automatic fingerprint identification system (AFIS) to test its ability to correctly differentiate false background features from real ones, again, showing a superiority of the RUVIS with 63% of the total initial marked features, being real. Overall, the CA and RUVIS sequence was found to be an ultimate method for multiple, same-type surfaces, with the RUVIS capable of visualization and capturing of the images simultaneously, significantly reducing the time of development and image processing.     

The optimisation of fingermark enhancement by VMD and Lumicyano™ on thermal paper

The enhancement of fingermarks on thermal paper can be challenging due to background staining caused by polar solvents used in fingermark enhancement techniques such as ninhydrin. This study explored a commercial one-step superglue fuming process, Lumicyano™, and Vacuum Metal Deposition (VMD) to develop fingermarks on this substrate and overcome this issue. Different sequential treatments involving Lumicyano™ and a combination of VMD methods were investigated with varying degrees of success with some sequences being highly sensitive. The VMD processes, however, were observed to generally be more effective at enhancing marks, whereas Lumicyano™ provided little or no benefit on this paper type. The results indicate that Lumicyano™ is only beneficial as a pre-treatment when the entire sequence of gold/zinc and silver/zinc is taken to completion. The gold/zinc and silver/zinc VMD processes were optimised on five different thermal papers, and the optimised techniques were then directly compared to determine which was more successful on each thermal paper type as a single treatment.     

Evaluation of alizarin and purpurin dyes for their ability to visualize latent fingermark on porous surfaces

Anthraquinones are a group of dye with many members and a wide range of industrial uses ranging from food, textiles to printing. Even though the reactions of anthraquinone dyes with amino acids are known, they have not yet been subjected to an examination regarding their ability in fingermark detection. In the presented study, the potential of alizarine and purpurin, natural anthraquinone dyes, as a fingermark reagent was examined in comparison with ninhydrin and lawsone. Alizarin and purpurin react with latent fingermark residue on copier paper and thermal paper to yield yellow-orange coloured impressions. The products formed also display photoluminescence properties when illuminated at 440 nm viewed through red filter. Both natural anthraquinone dyes exhibited some superior properties at the development of latent fingermarks on these surfaces compared to ninhydrin and lawsone.     

Vacuum metal deposition: developing latent fingerprints on polyethylene substrates after the deposition of excess gold.

A previously identified difficulty with the development of latent fingerprints on low-density polyethylene (LDPE) by vacuum metal deposition (VMD) is that excess gold deposition prevents effective zinc deposition and so inhibits latent print development [1]. The investigation of a means to correct for excess gold deposition was the basis for this study. Exposure to zinc and the readmission of air into the vacuum chamber followed by VMD development results in the deactivation of the initial gold clusters due to the formation of zinc oxide and the adsorption of air and water molecules. As a result, the majority of the gold deposited during the second treatment creates new gold clusters rather than adding to the gold clusters previously formed. After excess gold deposition on LDPE, the deposition of 1.5 times the optimum gold amount will result in good-quality normal development. The results also indicate that, on all surfaces, at least twice the initial gold count should be used for re-treatment when further development is required after air has been readmitted to the chamber.