Validation of a 16-locus fluorescent multiplex system

STR multiplexes have been indispensable for the efficient genotyping of forensic samples. The PowerPlex 16 System contains the coreCODIS loci, D3S1358, D5S818, D7S820, D8S1179, D13S317, D16S539, D18S51, D21S11, CSF1PO, FGA, THOI, TPOX, vWA, the sex determinant locus, amelogenin, and two pentanucleotide STR loci, Penta D and Penta E. This multiplex satisfies the locus requirements for most national databases and is the most efficient currently available system due to its single PCR amplification. To provide the groundwork for judicial acceptance, including the publication of primer sequences, and to evaluate laboratory-to-laboratory variation, a developmental validation for casework on this commercially available system was performed in 24 laboratories and produced the following conclusions. Amplification was reliable on a variety of thermal cyclers and product could be analyzed on either an ABI PRISM 310 Genetic Analyzer or an ABI PRISM 377 DNA Sequencer. Genotyping using single source samples was consistent between 0.25 and 2 ng of input DNA template with a few laboratories obtaining complete genotypes at 0.0625 ng. However, heterozygote allele imbalance (<60% peak height balance) caused by stochastic effects was observed at a rate of 13% with 0.125 ng DNA and 22% at 0.0625 ng DNA. Mixture analyses were done using a total of 1 ng of DNA template. Most alleles were detected in mixtures of 4 to 1 and some minor alleles were detected in mixtures of 19 to 1. Optimum amplification cycle number was dependent on the sensitivity of the detection instrument used and could also be adjusted to accommodate larger amounts of DNA on solid supports such as FTA paper. Reaction conditions including volume, annealing temperature, and concentrations of primer, AmpliTaq Gold, and magnesium were shown to be optimal yet robust enough to withstand moderate variations without affecting genotype analysis. Environmental, matrix and standard source analyses revealed an ability to obtain complete genotypes in all sample types except those exposed to 80 degrees C for 12-48 days. Finally, comparison of genotype results from the PowerPlex 16 System with other commercially available systems on non-probative reference and forensic samples showed consistent results.     

Presentation of a three-banded allele pattern--analysis and interpretation

The Israel police forensic biology laboratory received as an item of evidence in an attempted murder case, a pair of trousers belonging to a suspect. A bloodstain was observed on the trousers and analyzed by STR typing for nine loci using the Promega GenePrint STR silver stain detection kits. The genetic profile defined was found to be identical to that of the victim's at all nine loci. Within this profile a three-banded allele pattern was observed at the D16S539 locus, both in the bloodstain and in the victim's reference blood sample. Confirmation of this phenomenon was accomplished by amplifying the extracted DNA from both the trousers and the victim's blood sample using the PowerPlex 16 kit by Promega and the AmpFlSTR SGM Plus kit by Perkin Elmer, followed by analysis of the amplification products by capillary electrophoresis on the ABI prism 310 genetic analyzer. The same three-banded allele pattern was observed at the D16S539 locus in both specimen and reference DNA, using each of the three kits. Three additional loci located on chromosome 16 (D16S3407, D16S2617 and D16S3082), not employed for forensic identification, were also analyzed and did not show three-banded allele pattern.     

D16S539 microvariant or D2S1338 off-ladder allele? A case report about a range overlapping between two loci

All forensic laboratories routinely use commercial kits and softwares for automated typing; in rare cases genotyping misinterpretations or mislabellings occur. This study refers to the investigation on a D2S1338 off-ladder allele mislabelling observed in DNA profile of murdered woman.The Identifiler^® revealed heterozygosity in the range of D16S539, with a presumptive microvariant allele “14.2”, based on assigned size, while PowerPlex^®16 resulted in a homozygosity of allele “11”. Singleplex amplification of D16S539 locus confirmed homozigosity. D2S1338 locus, the closest to D16S1338 in Identifiler^®, genotyped as homozigote “19”, was singleplex amplified. The off-ladder peak was gel-isolated, sequenced and designed as a rare “11” allele variant [(TGCC)6(TTCC)5]. Genotype was finally designed as D16S539 “11,11” and D2S1338 “11,19”.To avoid genotyping misinterpretations or mislabelling, ambiguous genotypes should be established by two commercial kits at least. Furthermore, off ladder alleles as well as allele microvariants should be assigned by direct sequencing. This issue should be considered in Criminal DNA database requirements, that is still under debate in Italy.     

Allele distribution of 15 STR loci used for human identity purposes in the Greek Cypriot population of the island of Cyprus

Allele frequencies for 15 STRs (D3S1358, vWA, FGA, D8S1179, D21S11, D18S51, D5S818, D13S317, D7S820, THO1, Penta E, D16S539, CSF1PO, Penta D and TPOX) in the PowerPlex-16 System (Promega Corporation) were derived from a sample of 1475 unrelated Greek Cypriot individuals from the island of Cyprus.     

Long Allele Designations at D2S1338 and D19S433 Loci as Influenced by Various Multiplex STR Kits

European forensic laboratories are replacing the STR multiplex kits with the new generation 16/17 STR kits. This study examines the influence of the new generation kits and the new Applied Biosystems 3500xL Genetic Analyzer on the designation of long D2S1338 and D19S433 off‐ladder alleles. Different allele calls were obtained using the new NGM? (Applied Biosystems) and PowerPlex^® ESI? (Promega) kits compared with AmpF?STR^® SGM Plus? kit (Applied Biosystems). Sequence analysis was used to determine accurate allele designation. The new multiplex kits and the 3500xL Genetic Analyzer improved accuracy of long allele designations. DNA databases worldwide include countless profiles obtained by previous kits. Discrepancies between the new and former technologies may cause failure to detect hits. Discordance is expected due to primer sequence differences between various kits. An additional discordance, occurring in long alleles, independent of primer sequence is reported in this study.     

Profiler Plus系统在法医学DNA检验中的问题探讨

以Profiler Plus系统生产厂商提供的检验条件,在实际工作中对大规模样品进行了检验分析.结果显示该系统尚存在等位基因丢失、额外等位基因、同一荧光标记不同基因座等位基因重叠公布、罕见等位基因与亚型等非技术操作性问题.对有关样品应用Power Plex1.2,Power Plex16系统进行了检验验证.     

Concordance study between the AmpFlSTR MiniFiler PCR amplification kit and conventional STR typing kits

The AmpFlSTR MiniFiler polymerase chain reaction amplification kit developed by Applied Biosystems enables size reduction on eight of the larger STR loci amplified in the Identifiler kit, which will aid recovery of information from highly degraded DNA samples. The MiniFiler Kit amplifies CSF1PO, FGA, D2S1338, D7S820, D13S317, D16S539, D18S51, and D21S11 as well as the sex-typing locus amelogenin. A total of 1308 samples were evaluated with both the MiniFiler and Identifiler STR kits: 449 African American, 445 Caucasian, 207 Hispanic, and 207 Asian individuals. Full concordance between Identifiler and MiniFiler Kits was observed in 99.7% (10,437 out of 10,464) STR allele calls compared. The 27 differences seen are listed in Table 1 and encompass the loci D13S317 (n = 14) and D16S539 (n = 10) as well as D18S51 (n = 1), D7S820 (n = 1), and CSF1PO (n = 1). Genotyping discrepancies between the Identifiler and MiniFiler kits were confirmed by reamplification of the samples and further testing using the PowerPlex 16 kit in many cases. DNA sequence analysis was also performed in order to understand the nature of the genetic variations causing the allele dropout or apparent repeat unit shift.     

Characterization and validation studies of powerPlex 2.1, a nine-locus short tandem repeat (STR) multiplex system and penta D monoplex

In order to increase the power of discrimination for human identification purposes, a nine-locus short tandem repeat (STR) multiplex, the GenePrint PowerPlex 2.1 system (PowerPlex 2.1) developed by Promega Corporation and a separate pentanucleotide-repeat locus, Penta D, were tested. This megaplex system includes the highly polymorphic loci FGA, TPOX, D8S1179, vWA, Penta E, D18S51, D21S11, TH01, and D3S1358 and may be used in combination with the eight-locus STR multiplex, the GenePrint PowerPlex 1.1 system (PowerPlex 1.1) that has been previously developed. Three of the loci, TPOX, TH01 and vWA, have been included in both systems for quality control purposes. As with PowerPlex 1.1, PowerPlex 2.1 is also based on a two-color detection of fluorescent-labeled DNA products amplified by polymerase chain reaction (PCR) and provides a valuable tool for accurate and rapid allele determination. The primer sequences used in the PowerPlex 2.1/Penta D system are also presented in this report. To meet the "Quality Assurance Standards for Forensic DNA Testing Laboratories" (FBI), we tested the efficiency and reproducibility of the PowerPlex 2.1/PentaD system by several validation studies that were conducted as a joint project among seven laboratories. Validation tests included concordance studies, sensitivity, and species specificity determination, as well as performance in forensic and environmentally impacted samples. The results produced from these tests demonstrated the consistency and reliability of the PowerPlex 2.1/Penta D system.     

Identification of a D8S1179 primer binding site mutation and the validation of a primer designed to recover null alleles

A population study of Chamorros and Filipinos using short tandem repeat (STR) loci amplified with the AmpFlSTR Profiler Plus PCR amplification kit demonstrated an excess of observed homozygosity at the D8S1179 locus. Use of a different set of D8S1179 primers to type the same samples did not demonstrate an excess of homozygosity and showed discordant genotypes at the D8S1179 locus. A single point mutation, G-to-A transition, 16 nucleotides from the 3' end of the reverse primer, was identified to cause allele dropout when using the AmpFlSTR Profiler Plus primer set. An additional D8S1179 reverse primer specific for the variant was constructed resulting in the recovery of the null allele. The primer was included in the newly developed AmpFlSTR Identifiler PCR amplification kit. No deleterious effects or non-specific peaks were observed in validation experiments evaluating primer concentration, Mg2+ concentration, annealing temperature and population samples.     

STR data for the power plex-16 loci in a population from Central Poland

The allele frequencies for the 13 CODIS core loci and two recently developed but not extensively validated in Central European populations pentanucleotide STRs (Penta E and D) were determined using the Power Plex-16 (Promega) kit in a sample of 430 unrelated individuals born in Central Poland. The calculated parameters of polymorphism showed Penta E to be the most valuable marker from the studied set. The obtained distribution of Penta E and D alleles was statistically significantly different from that previously reported for a population of Southern Poland. Analysis of Hardy-Weinberg equilibrium revealed a deviation for the D5S818 locus which may reflect presence of a null allele.     

Evaluation of the PowerPlex Fusion System in a sample from East Timor

East Timor is a country located in Southeast Asia. In this study, we determined allele frequencies and forensic parameters for 24 STR autosomal loci included in the PowerPlex^® Fusion System. Autosomal STR data was collected from saliva samples of 100 individuals from East Timor. The amplification of the 24 autosomal STRs was performed using PowerPlex^® Fusion System (Promega Corporation) and the amplified products were analysed on 3500 Genetic Analyser using GeneMapper^® ID-X 1.2 Software (Applied Biosystems). All the analysed loci meet Hardy–Weinberg equilibrium after Bonferroni correction. In our samples, we found “off-ladder” alleles (D2S441, Penta E and FGA locus) confirmed by reamplification, amplification with others kits and sequenced when justified.     

Validation of short tandem repeats (STRs) for forensic usage: performance testing of fluorescent multiplex STR systems and analysis of authentic and simulated forensic samples

The amplification and typing conditions for the 13 core CODIS loci and their forensic applicability were evaluated. These loci are CSF1PO, FGA, TH01, TPOX, vWA, D3S1358, D5S818, D7S820, D8S1179, D13S317, D16S539, D18S51, and D21S11. Results were obtained using the multiplex STR systems AmpFlSTR Profiler Plus and AmpFlSTR COfiler (Applied Biosystems, Foster City, CA), GenePrint PowerPlex (Promega Corporation, Madison, WI), and subsets of these kits. For detection of fluorescently labeled amplified products, the ABI Prism 310 Genetic Analyzer, the ABI Prism 377 DNA Sequencer, the FMBIO II Fluorescent Imaging Device, and the Fluorlmager were utilized. The following studies were conducted: (a) evaluation of PCR parameter ranges required for adequate performance in multiplex amplification of STR loci, (b) determination of the sensitivity of detection of the systems, (c) characterization of non-allelic PCR products, (d) evaluation of heterozygous peak intensities, (e) determination of the relative level of stutter per locus, (f) determination of stochastic PCR thresholds, (g) analysis of previously typed case samples, environmentally insulted samples, and body fluid samples deposited on various substrates, and (h) detection of components of mixed DNA samples. The data demonstrate that the commercially available multiplex kits can be used to amplify and type STR loci successfully from DNA derived from human biological specimens. There was no evidence of false positive or false negative results and no substantial evidence of preferential amplification within a locus. Although at times general balance among loci labeled with the same fluorophore was not observed, the results obtained were still valid and robust. Suggested criteria are provided for determining whether a sample is derived from a single source or from more than one contributor. These criteria entail the following: (a) the number of peaks at a locus, (b) the relative height of stutter products, and (c) peak height ratios. Stochastic threshold levels and the efficiency of non-templated nucleotide addition should be considered when evaluating the presence of mixtures or low quantity DNA samples. Guidelines, not standards, for interpretation should be developed to interpret STR profiles in cases, because there will be instances in which the standards may not apply. These instances include (a) a primer binding site variant for one allele at a given locus, (b) unusually high stutter product, (c) gene duplication, and (d) translocation.     

Characterization of the variant allele 9.2 of Penta D locus

DNA profiles of forensic cases of Córdoba Province, Argentina, typed by PowerPlex 16 kit (Promega), have shown in the Penta D locus few samples with a variant allele migrating as an off ladder between alleles 9 and 10. In order to determine the molecular basis of the new variant allele, three samples were subject to polymerase chain reaction amplification of the Penta D locus by monoplex, and were further purified and sequenced. The sequence analysis revealed that the off ladder allele has ten repeats motifs AAAGA as allele 10, with three nucleotides (TAA) deletion in the 3' flanking region, 128 nucleotides after the last repeat. Therefore, the variant allele could be explained by a deletion of allele 10, and was designated 9.2. Mse I digestion assay allows to corroborate allele 9.2 without sequencing. A population study in Córdoba Province indicates that allele 9.2 of Penta D locus has a frequency of 0.0063.     

Contribution for an African autosomic STR database (AmpF/STR Identifiler and Powerplex 16 System) and a report on genotypic variations

Allele frequencies, together with some parameters of forensic interest, for 17 STRs included in the AmpF/STR Identifiler (CSF1PO, D2S1338, D3S1358, D5S818, D7S820, D8S1179, D13S317, D16S539, D18S51, D19S433, D21S11, FGA, TH01, TPO and VWA) and Powerplex 16 System (CSF1PO, D3S1358, D5S818, D7S820, D8S1179, D13S317, D16S539, D18S51, D21S11, FGA, Penta D, Penta E, TH01, TPO and VWA) were estimated from a sample of 135-144 unrelated individuals from Mozambique. No deviations from Hardy-Weinberg equilibrium were observed with the exception of the FGA locus (using the Bonferroni correction for the number of loci analysed, the departure observed at this locus was not significant). Comparative analyses between our population data and other African databases, namely Promega's African-Americans, AB Applied Biosystems African-Americans and two other population samples from Mozambique and Guiné Bissau, are presented and discussed. Genotype inconsistencies between both commercial kits (for D16S539 and D8S1179) and other genotypic variations (three-banded allele patterns for TPO) are also reported.     

Validation and implementation of the PowerPlex 16 BIO System STR multiplex for forensic casework

The PowerPlex 16 BIO multiplex short tandem repeat (STR) system contains the 13 CODIS loci (FGA, TPOX, D8S1179, vWA, D18S51, D21S11, TH01, D3S1358, CSF1PO, D16S539, D7S820, D13S317, and DS5S818), plus two pentanucleotide repeat loci (Penta D and Penta E) and the sex-identifying locus. Amelogenin. The PowerPlex 16 BIO System is optimized for use with the Hitachi FMBIO gel imaging systems. A consortium of seven independent laboratories collaborated to perform the studies defined by the FBI standards for performing a developmental validation, including the evaluation of sample concordance, percent stutter determination, nonprobative casework, precision, sensitivity, mixture determination, effect of substrates, the impact of environmental insults, and species specificity. All samples tested for concordance were consistent except for one sample from the Virginia Division of Forensic Science database that displayed discordance at D13S317, a locus whose primer sequence was altered. Stutter values were comparable to those of other STR multiplex systems, the precision was comparable to other multiplexes analyzed by gel electrophoresis, the DNA profiles were unchanged by the substrate upon which the blood samples were placed, and the nonprobative casework samples re-typed for the PowerPlex 16 BIO System were consistent with previous typing results. When greater than 0.125 ng of DNA was placed into the PowerPlex 16 BIO System amplification reaction, a full profile was generated by all laboratories. The mixture study results were comparable to those reported for other multiplex systems, the environmental study demonstrated a loss of larger molecular weight loci when samples were incubated at elevated temperatures for a prolonged period of time, and the only notable cross species hybridization was observed with primate DNA samples. This extensive validation work performed demonstrates that the PowerPlex 16 BIO System provides STR data of a quality comparable with other PowerPlex STR multiplex kits as well as other widely used STR multiplexes and is thus suitable for evidentiary casework analysis as well as database sample profiling.     

Swiss Caucasian population data for the STR loci D2S1338 and D19S433 using the AmpFISTR SGM plus PCR amplification kit

Allele and genotype frequencies for the ten STR loci D3S1358, VWA, D16S539, D2S1338, D8S1179, D21S11, D18S51, D19S433, TH01, FGA were determined in a Swiss Caucasian population sample (n=206) using the AmpFISTR SGM Plus Amplification kit. Electrophoresis was carried out on an ABI PRISM CE 310 Genetic Analyzer instrument. Previously, allele frequencies were published for the 13 STR loci D3S1358, VWA, FGA, D8S1179, D21S11, D18S51, D5S818, D13S317, D7S820, THO1, TPOX, CSF1PO and D16S539 for the same samples (n=206) amplified with the AmpFISTR Profiler Plus and Cofiler PCR Amplification kits. Since the results for the eight loci D3S1358, VWA, FGA, D8S1179, D21S11, D18S51, THO1, D16S539 shared between the AmpFISTR SGM Plus, Profiler Plus and Cofiler PCR Amplification kits already are published, only the allele frequencies for the two STR loci D2S1338 and D19S433 are reported in this paper. The two loci meet Hardy-Weinberg expectations. In addition, there is little evidence for association of alleles among the 15 loci (amplified with the Profiler, Cofiler, and SGM Plus amplification kits). The allelic frequency data can be used in forensic analyses to estimate the frequency of a multiple STR locus DNA profile in the Swiss population.     

A D19S433 primer binding site mutation and the frequency in Japanese of the silent allele it causes

Short tandem repeat studies are powerful tools for parentage analysis and for identification of missing persons, victims of murder, and victims of mass fatalities when reference samples are unavailable. The primer in the Identifiler kit failed to amplify an allele at the D19S433 locus, producing a silent ("null") allele. The causal mutation is a base change (G>A) 32 nucleotides downstream from the 3' end of the AAGG repeats. The silent alleles are problematical in parentage analysis because when transmitted, they can cause a parent-child inconsistency that is unrelated to Mendelian genetics. The inconsistency is sometimes termed an "apparent opposite homozygosity" and it produces false evidence of nonparentage. Alternative primers were designed to amplify the D19S433 locus alleles and they detect the silent allele. Frequencies of the (no longer) silent allele were determined to be 0.0114 in 176 people from Shizuoka (Honshu) and 0.0128 in 156 people from Okinawa.     

A single mutation in the FGA locus responsible for false homozygosities and discrepancies between commercial kits in an unusual paternity test case

We report an unusual paternity test case showing multiple peculiarities. Using AmpFlSTR Profiler Plus and AmpFlSTR Identifiler PCR Amplification kits, the alleged father and the two children were apparently homozygous at the FGA locus, but using the PowerPlex 16 kit the three individuals were found to be heterozygous. Drop-out was caused by a single mutation event in the presumptive binding site of the reverse primer. In addition, three inconsistencies were detected between the daughter and the alleged father among 18 STR markers. The occurrence of the rare null allele at the FGA locus and case history suggested that the true father was the brother of the alleged father. Furthermore, a single-step repeat maternal mutation was also detected at D16S539. This puzzling case was solved by using multiple analytical approaches, including the use of different primer pairs, the use of a high number of STR markers, and the characterization of the mutation causing the "null allele."     

Sequence variation in humans and other primates at six short tandem repeat loci used in forensic identity testing

A large number of alleles from the six different short tandem repeat (STR) loci FGA, D3S1358, vWA, CSF1PO, TPOX and TH01, used in human identity testing were sequenced to provide support for the robustness of fluorescent STR DNA typing by allele size. Sequence information for some of these loci (FGA, vWA, TH01) is an extension of published work, whereas no extensive sequence information is available with respect to the D3S1358, CSF1PO, and TPOX loci. Sequencing of alleles at each locus has provided quantitative data with respect to the true nucleotide length of common alleles, and of alleles that vary in length from the common alleles. All alleles that were identified as "off-ladder" alleles through fluorescent typing at these STR loci have proven to be true length variant alleles. Sequencing at the D3S1358 and CSF1PO loci allowed for the establishment of a common nomenclature for these loci. A correlation between percent stutter and the length of the core tandem repeat is demonstrated at the FGA locus. Alleles in which the core tandem repeat is interrupted by a repeat unit of different sequence have a reduced percent stutter. DNA samples from three non-human primates (chimpanzee, orangutan, and gorilla) were compared to the human sequences, and shown to differ markedly across loci with respect to their homology. The effects of primer binding site mutations on the amplification efficiency at a particular locus, and methods used to interpret amplification imbalance of heterozygous alleles at a locus is also addressed.     

Validation of the AMPFlSTR SGM plus system for use in forensic casework

The AMPFlSTR((R)) SGM Plus system is a commercially available STR multiplex produced by Applied Biosystems, a division of Perkin Elmer, Foster City, California, USA that supersedes SGM. The multiplex contains the six SGM loci, amelogenin and four additional loci. These additional loci are D3S1358, D19S433, D16S539 and D2S1338. Consequently, the match probability is significantly improved (conservatively quoted as 1 in 10(9) for reporting a full profile match). The system was subjected to validation. For example, ageing and degradation studies demonstrated semen stains to be the most stable evidence type, whereas buccal scrapes were the least stable. An apparent rise in the sensitivity increases the chance of obtaining successful results from the more difficult samples submitted for analysis. Two of the new loci (D3S1358 and D19S433) are low molecular weight (between 100 and 150 base pairs); this improved the success rates of the degraded samples where high molecular weight loci may drop out. Of 26 non-primates tested, four gave results that appeared as single peaks and were unlikely to cause interpretation problems. None of the 19 micro-organisms tested gave discernible results. Extensive casework and simulated casework studies demonstrated that SGM and SGM plus results were comparable. There was one example of a null allele (primer binding site mutation) recorded at the HUMFIBRA locus (in both systems). However, a concordance study of 1000 samples using both SGM and SGM plus did not demonstrate any differences in typing.