光谱成像检验法在朱墨时序鉴定中的应用

光敏印文色料与签字笔书写色料交叉重叠后,因互溶渗透不易形成层状结构而使判定朱墨时序的难度较大。光谱成像检验法是通过比较交叉点、纯印文色料、纯墨迹色料处的反射曲线位置来判定交叉时序关系。     

利用IDMH-Z780系统对碳素钢笔水书写字迹与印章印文交叉时序的无损检验研究

目的研究常见的碳素钢笔水书写笔迹与不同印章印文交叉时序的相关性。方法利用IDMH-Z780系统对制成的实验样本进行微观观察,并对三维数学模型图进行特征分析。结果先墨后朱,交叉部位字迹边缘状态完整,等高线宽度、流向未见明显变化;先朱后墨,书写笔迹色料分布发生数字图形曲面变化。结论用IDMH-Z780系统可以观察分析朱墨交叉部位的微观特征和无损检验研究。     

DVI-300微痕迹色差分析系统对激光打印文字与印章印文交叉时序检验的方法研究

目的研究常见的打印字迹与不同印章印文交叉时序的相关性,为检验提供依据。方法应用DVI-300微痕迹色差分析系统对制成的实验样本进行实体观察,并对微痕迹色差模型图进行特征分析。结果先墨后朱,交叉部位字迹边缘状态完整,等高线宽度、流向未见明显变化;先朱后墨,交叉部位中心字迹等高线排列出现游离状态,色料分布发生数字图形曲面变化。结论用本系统可以观察、分析朱墨交叉部位的微观特征和无损检验研究。     

运用高倍显微镜判断朱墨时序的方法

作者通过对手写文字与印章印文的朱墨时序的大量实验研究，并结合司法鉴定实践，总结了一套行之有效的运用高倍显微镜判断朱墨时序的检验方法，具有较大的应用价值。     

荧光检验法在朱墨时序鉴定中的应用研究

朱墨时序鉴定一直是文书司法鉴定实践中常见的鉴定项目,也是研究的热点和疑难问题.通过实验研究并结合检案实践,较系统地阐述了视频荧光光谱检验法和显微荧光检验法在朱墨时序鉴定的具体应用,探讨了荧光检验的技术要点.研究表明,荧光检验法（特别是显微荧光检验法）具有普通显微检验法的优点,同时对普通显微检验法中难以观察到的印文或文字色料荧光特性及色料的微观分布状态,具有明显的检验效果,是普通显微检验法有效的补充检验手段.     

打印复印文件朱墨时序表观特征初探

本文详细介绍了一案例的检验过程,并通过简单实验对激光打印、静电复印形成文件的朱墨时序的表观特征进行了粗浅的探究。总体而言,两种时序在朱墨交叉点的表观特征上具有文字与印文均完整、肉眼感觉文字均压在印文之上的共同点;在两者本质的差异点上,先朱后墨表现为交叉点的墨粉与未交叉部位一致,先墨后朱表现为交叉点的墨粉光泽度增加、具有潮湿感、以及易出现水珠状的印油积聚现象。     

无碳复写字迹与印文的朱墨时序检验

依据无碳复写纸的制造工艺、结构特点和复写原理,对无碳复写字迹与印文的形成时序特征进行探索,寻求判断两者形成次序的规律性特征以及检验依据和方法,以较为直观的显微检验,分析朱墨交叉点的微观形态,并提出利用微囊壳颜色分析、谷底显色及转印痕迹分析等方法对无碳复写字迹与印文的形成时序进行准确的认定。     

无交叉笔画状态下激光打印文字与中性笔书写文字形成时序的实验研究

目的探索无交叉笔画状态下激光打印文字与中性笔书写文字的时序特征及变化规律,以求运用于案件检验。方法以两种不同时序,请5名志愿者分别执不同中性笔在120张A4纸张上书写文字,并使用4台不同型号激光打印机打印文字,再运用奥博视频层晰显微镜对实验样本进行放大观察。结果证实在两种时序条件下制作的实验样本之间存在诸多差异性特征。结论这些差异性特征为准确判定无交叉笔画状态下激光打印文字与中性笔书写文字的时序提供了基础实验依据。     

荧光法判断激光打印文件朱墨时序的研究

目的 建立荧光法判断激光打印文件朱墨时序的检验方法,并分析不同型号的激光打印机制成的文件与不同材质的印章印文的采墨时序的特征.方法 利用VSCS000文检仪和Photoshop软件,采用荧光法对激光打印文件与印章印文交叉部位的特征进行检验,并对不同型号的打印机制成文字与不同材质的印章印文交叉部位的荧光特征进行分析比对.结果 发现常出现的共性特征为:制成文字先墨后朱,交叉部位的黑色墨迹颜色变淡并可见紫色荧光;先末后墨,交叉部位常常出现黑色墨迹缺损的现象,在缺损处可见紫色荧光点.但也表现出其特有的特征.结论 不同型号的打印机制成的文件与不同材质的印章朱墨时序所表现出来的特征不尽相同,在具体案件鉴定中应进行综合判断.     

拉曼光谱成像技术检验朱墨时序中书写笔种类对检验结果的影响研究

目的考察在运用拉曼光谱阵列面扫描检验朱墨时序的方法中书写笔油墨种类对检验结果的影响。方法根据拉曼谱图的不同对搜集的188种书写笔（包括22种黑色圆珠笔,62种蓝色圆珠笔,62种黑色签字笔,42种蓝色签字笔）进行扫描并分类,采用拉曼光谱阵列面扫描技术对书写笔与同一印泥和印油形成的朱墨时序样本进行检验。结果 188种书写笔被分为4大类23小类,4类书写笔与印泥或印油形成的朱墨时序样本都得到了较好的检验结果。结论在本实验条件下,书写笔油墨种类对拉曼光谱阵列面扫描检验朱墨时序的检验结果没有影响。     

An Examination of the Sequence of Intersecting Seal and Laser Printing Toner Line

Examining the sequence of intersecting seal and laser printing line is a significant method of determining the authenticity and validity of documents. In this study, five brands of stamp pad inks, three types of inkpads and seven kinds of laser printers were used to make heterogeneous line intersections. Observation method of physical characteristics, scraping technique and fluorescence method was used to determine the sequence of intersecting lines. Distinguishing features were noted between the materials produced in both sequences. As the results obtained from the study were positive, these features might provide a scientific basis for accurately determining the sequence between laser printing line and inkpad (stamp pad ink) seal.     

激光显微共聚焦拉曼光谱仪对红色墨迹的研究

目的利用激光显微共聚焦拉曼光谱仪对文书中常见的红色墨迹材料进行表征,研究该方法对红色墨迹材料的区分能力。方法在785nm激发波长,50倍物镜条件下,对49种红色印文,以及9种彩色喷墨打印和13种彩色激光打印的红色墨迹材料进行拉曼光谱表征。结果通过对71种墨迹样品的谱图进行分析,可以发现,红色印文墨迹、喷墨打印红色墨迹及激光打印红色墨迹的拉曼光谱间均存在差异,同时,拉曼光谱可将这三种墨迹材料分别进一步区分。结论显微共聚焦激光拉曼光谱可对红色墨迹材料进行有效表征和区分。这一方法可对红色印文墨迹进行识别,并且可实现对伪造印文文件的鉴别。     

TOF‐SIMS Analysis of Red Color Inks of Writing and Printing Tools on Questioned Documents

Time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) is a well‐established surface technique that provides both elemental and molecular information from several monolayers of a sample surface while also allowing depth profiling or image mapping to be performed. Static TOF‐SIMS with improved performances has expanded the application of TOF‐SIMS to the study of a variety of organic, polymeric, biological, archaeological, and forensic materials. In forensic investigation, the use of a minimal sample for the analysis is preferable. Although the TOF‐SIMS technique is destructive, the probing beams have microsized diameters so that only small portion of the questioned sample is necessary for the analysis, leaving the rest available for other analyses. In this study, TOF‐SIMS and attenuated total reflectance Fourier transform infrared (ATR‐FTIR) were applied to the analysis of several different pen inks, red sealing inks, and printed patterns on paper. The overlapping areas of ballpoint pen writing, red seal stamping, and laser printing in a document were investigated to identify the sequence of recording. The sequence relations for various cases were determined from the TOF‐SIMS mapping image and the depth profile. TOF‐SIMS images were also used to investigate numbers or characters altered with two different red pens. TOF‐SIMS was successfully used to determine the sequence of intersecting lines and the forged numbers on the paper.     

中空性皮下出血宽度与致伤木棒直径的相关性

目的观察不同直径和不同打击力度的圆柱形木棒对垂直方向打击皮肤所形成的中空性皮下出血形态的相关性。方法采用生物力学击打装置,使用5种不同直径（2.0～4.0cm）木棒,从零递增击打力度（0～2300N）,对活体乳猪背部皮肤进行打击,观察乳猪背部皮肤中空性皮下出血分布范围、色泽及形态特征,并采用SPSS 13．0统计软件对所得数据进行分析。结果中空性皮下出血出现的最小打击力度阈值（230N）,随打击工具直径的增大而阈值增大（230～810N）;同一直径的木棒在不同击打力度下所形成的中空性皮下出血总宽度及中空宽度均没有统计学差异（P〉0.05）。中空性皮下出血的范围随木棒直径的增大而增大（R2=0．953,P〈0．01）;皮下出血总宽度及中空宽度与打击物直径,存在较好的正相关性（R2=0．797,P〈0．01）,符合一元线性回归方程模型。结论本研究可望用于推断垂直打击造成中空性皮下出血的木棒直径的大小,为钝器致伤工具的判断提供初步的理论依据。     

浅谈左手书写者左右手笔迹的特点及变化规律

目的为左手书写者左手笔迹及右手笔迹的检验鉴定提供参考依据。方法收集左手书写者的左手正常笔迹和其右手笔迹,进行比对检验和实验数据统计分析。探讨左手书写者左手笔迹和右手笔迹的特点及变化规律。将左手书写者的左、右手笔迹的特点和变化规律与右手书写者的右、左手笔迹的特点和变化规律进行比较。结果左手书写者的左手笔迹和右手笔迹在笔顺、写法、错别字等特征上保持稳定。结论左手书写者的笔迹检验应结合其左手笔迹和右手笔迹的特点和变化规律,并注意其与右手书写者的右手笔迹和左手笔迹的特点和变化规律的区别与联系。     

门字框笔顺的判断方法

通过实验研究门字框笔顺判断的科学方法，收集155份实验笔迹样本，由书写人报告样本字中门字框的笔顺。分析门字框的笔迹形态与规范笔顺、通用笔顺的关系，发现点笔搭配位置，竖笔和点笔的收笔动向可以作为判断笔顺的可靠依据，根据点笔位置、竖笔和点笔收笔动向的规律，得出了门字框规范笔顺和通用笔顺的判断规则。     

卧姿笔迹特征的实验研究

目的为卧姿笔迹鉴定提供识别和评断的参考依据。方法比较108个不同书写水平者的仰卧、左侧卧、右侧卧及俯卧笔迹与正常坐姿笔迹特征上的异同点,通过大量实验数据的统计分析,总结出卧姿笔迹特征及其变化规律,探讨可能的变化原因,并分析卧姿笔迹检验的要点。结果卧姿笔迹在字体、写法、错别字、笔顺、字间组合和单字的基本搭配比例等特征上较稳定。这些特征可作为本质特征使用。4种卧姿中,俯卧笔迹特征最稳定;书写水平高者笔迹特征也较稳定。结论卧姿笔迹鉴定应结合卧姿笔迹特征变化规律,准确判断笔迹的形成条件,去伪存真,做出科学的评断。     

书写能力的结构

目的提出人的书写能力由基础因子构成的假说。方法根据因子说,不同字的笔顺可能相关。以反犬旁、山字为目标字,收集799份有效实验样本,分性别检验实验样本中2个目标字的笔顺是否相关。结果统计检验表明反犬旁笔顺与山字笔顺相关（p〈0.01）,用一个笔顺在另一个笔顺出现的条件下的出现率与它的出现率之比测定它们相关性的大小,最高的比值为3.65。结论证实了人的书写能力由基础因子构成的假说,这个假说可以作为笔迹比较的理论基础。     

Determination of the sequence of intersecting lines from laser toner and seal ink by Fourier transform infrared microspectroscopy and scanning electron microscope / energy dispersive X-ray mapping

The aim of this study was to verify that the combination of Fourier transform infrared microspectroscopy and scanning electron microscope / energy dispersive X-ray mapping could be applied to line intersection problems. The spectral data of red seal ink, laser toner and their intersections, such as peak location and peak intensity, were described. Relative peak height ratios of different chemical components in intersecting lines were used to distinguish the sequences. Energy dispersive X-ray mapping characteristics of intersecting areas were also detailed. The results show that both the laser toner and the seal ink appear on the surface of intersections, regardless of the sequence. The distribution of the two inks on the surface is influenced not only by the sequence of heterogeneous lines but also by diffusion. Fourier transform infrared microspectroscopy and scanning electron microscope/energy dispersive X-ray mapping are able to explore the chemical components and the corresponding elemental distribution in the intersections. The combination of these two techniques has provided a reliable method for sequencing intersecting lines of red seal ink and laser toner, and more importantly, this method may be a basis for sequencing superimposed lines from other writing instruments.     

Examination of heterogeneous crossing sequences between toner and rollerball pen strokes by digital microscopy and 3-D laser profilometry

The determination of line crossing sequences between rollerball pens and laser printers presents difficulties that may not be overcome using traditional techniques. This research aimed to study the potential of digital microscopy and 3-D laser profilometry to determine line crossing sequences between a toner and an aqueous ink line. Different paper types, rollerball pens, and writing pressure were tested. Correct opinions of the sequence were given for all case scenarios, using both techniques. When the toner was printed before the ink, a light reflection was observed in all crossing specimens, while this was never observed in the other sequence types. The 3-D laser profilometry, more time-consuming, presented the main advantage of providing quantitative results. The findings confirm the potential of the 3-D laser profilometry and demonstrate the efficiency of digital microscopy as a new technique for determining the sequence of line crossings involving rollerball pen ink and toner.