502指印的光学加强方法研究

目的通过对502胶指印的光学加强研究,找出最佳502胶指印拍摄提取照明方法。方法对三种客体上的指印各100枚分别用502胶熏显,并用四种不同照明方法进行比较。结果不同客体上的502胶指印,需根据不同情况选择不同照明方法拍摄提取。结论本研究结果对实际应用有较大参考价值。     

Nanoscale analysis of the interaction between cyanoacrylate and vacuum metal deposition in the development of latent fingermarks on low-density polyethylene

Vacuum metal deposition (VMD) has been previously demonstrated as an effective development technique for latent fingermarks and in some cases has been shown to enhance prints developed with cyanoacrylate (CA) (superglue) fuming. This work utilizes scanning electron microscopy (SEM) to investigate the interactions of the two development techniques when applied to latent fingermarks on low-density polyethylene. CA is shown to act principally on the eccrine deposits around sweat pores, where polymerization results in long polymer fibrils a few 100 nm in width. Subsequent VMD processing results in additional areas of development, for example, between pores. However, the primary mode of deposition of zinc is by interaction with the polymerized CA, the fibrils of which become decorated with zinc nanoparticles. Areas with limited CA deposition and no significant polymerization are also enhanced with the VMD process, resulting in increased print development.     

The optimisation of fingermark enhancement by VMD and Lumicyano™ on thermal paper

The enhancement of fingermarks on thermal paper can be challenging due to background staining caused by polar solvents used in fingermark enhancement techniques such as ninhydrin. This study explored a commercial one-step superglue fuming process, Lumicyano™, and Vacuum Metal Deposition (VMD) to develop fingermarks on this substrate and overcome this issue. Different sequential treatments involving Lumicyano™ and a combination of VMD methods were investigated with varying degrees of success with some sequences being highly sensitive. The VMD processes, however, were observed to generally be more effective at enhancing marks, whereas Lumicyano™ provided little or no benefit on this paper type. The results indicate that Lumicyano™ is only beneficial as a pre-treatment when the entire sequence of gold/zinc and silver/zinc is taken to completion. The gold/zinc and silver/zinc VMD processes were optimised on five different thermal papers, and the optimised techniques were then directly compared to determine which was more successful on each thermal paper type as a single treatment.     

Further Pseudo-Operational Trials with the Lumicyano Double- and Co-Fuming Process for the Detection of Latent Fingermarks

This study presents a number of pseudo-operational trials on plastic bags investigating the double- and co-fuming process of a one-step fluorescent cyanoacrylate (Lumicyano^TM) in comparisons with the two-step process with basic yellow 40 (BY40) staining for the detection of latent fingermarks. The results demonstrate that both Lumicyano solution and dye contribute to the increased detection of latent fingermarks during the double-fuming process (trial 1). Co-fuming the Lumicyano solution and dye separately (at a concentration of 8%) but simultaneously was less effective than 8% Lumicyano (trial 2). Co-fuming Lumicyano 8% and an additional 8% Lumicyano dye by weight was more effective than Lumicyano 8% (trial 3), possibly due to increased fluorescent material deposition during co-fuming allowing for better visualization. The use of BY40 after Lumicyano resulted in a considerable increase in detected fingermarks.     

紫外反射照相显现指印与502胶熏显指印方法的比对

目的比较紫外反射照相与502胶熏显两种方法显现指印的成功率,确定在同等条件下优先使用那种显现方法。方法对玻璃、陶瓷、黑白照片上3种类型上的汗液指印,油脂指印和普通指印各100枚,分别用紫外反射拍照显现与502胶熏显,统计两者达到3等级以上的比例,来判断效果的好坏。结果紫外反射照相显现法在3种客体上显现的成功率高于502胶熏显法。结论实验结果为选择指印显现方法提供了科学依据。     

“502”胶和碘熏法显现皮制品表面潜手印的研究

使用"502"胶法、碘熏法、先"502"胶后碘熏法、先碘熏后"502"胶法及"502"胶和碘共同熏显法五种方法分别显现深色和浅色皮制品表面的潜手印,结果发现"502"胶法对深色皮制品表面潜手印的显现效果良好,"502"胶和碘共同熏显法对浅色皮制品表面潜手印的显现效果良好,为皮制品表面潜手印的显现提供了条件。     

A mechanistic model for the superglue fuming of latent fingerprints

The use of superglue vapors to detect latent fingerprints, known as superglue fuming, is a chemical process that has not been fully described. The role of the fingerprint material in the process, leading to formation of methyl cyanoacrylate polymer at the site of the fingerprint, remains to be established. Films of liquid alkanes respond similarly to actual fingerprints in the fuming experiment. Their responses depended on the hydrocarbon used, viscosity, and film thickness. Aspects such as film thickness appear to be relevant for actual fingerprints as well. A model was proposed in light of these observations. The model compares the process with gas chromatography, in which molecules partition between the gas phase and a stationary phase. Aspects such as accumulation of superglue monomers by partitioning into a thin film (or wax) are consistent with the preferential response of fingerprints on surfaces relative to the background.     

“502”胶液体显现潜手印技术的研究

目的研究探索"502"胶溶液显现手印的方法.方法以石油醚为分散剂,添加对苯二酚作为显现增强剂,配制"502"胶显现液.结果能够显现非渗透客体上油质加、减层手印、加减层混合手印及普通汗潜手印,其显现效果与"502"胶熏显法非常相似.结论该方法具有方便、快捷、灵敏等特点,是"502"胶显现手印技术的重要补充.