高效液相色谱-蒸发光散射法分析人和动物油脂种属

目的采用反相高效液相色谱-蒸发光散射方法分析人和动物油脂种属。方法采集人体和7种动物(猪、牛、羊、鸡、鸭、鹅、鱼)油脂,丙酮溶解后直接进样分析,色谱柱为C18反相柱,流动相为二氯甲烷-乙腈(30∶70 V/V),流速1.0mL/min,蒸发光散射检测器进行检测。结果采用本文方法检测POSt、MMP、StPSt、OPO 4种甘油三酯组分分离效果良好;用于油脂分析,其主要组分高级脂肪酸三甘酯均得到了有效分离,色谱峰的保留时间和相对峰面积比的重现性好;与动物油脂比较,人体油脂具有独特的色谱特征;动物之间色谱特征也有差异。结论采用本文高效液相色谱-蒸发光散射法检测油脂,可根据人体油脂与动物油脂色谱特征的差异为油脂种属鉴定提供依据。     

瞬时裂解甲基化技术——一种快速鉴别人体脂肪及动植物油脂的色谱分析方法

本文着重介绍一种新的分析方法:瞬时裂解甲基化技术,及其在刑事技术有机微量物证人体脂肪及动、植物油脂检验中的应用和进展,并做以评述。     

灭多威的高效液相色谱分析

本文详细讨论了用有机溶剂从动物油脂中提取农药灭多威,用紫外分光光度法和高效液相色谱法定性定量分析灭多威的方法,得出高效液相色谱分析灭多威的最佳色谱条件及其定量标准曲线;测出用甲醇溶剂从猪油中提取灭多威的提取率为100％;测出灭多威的最小检出量为0.17μg。     

PCR-STR技术在交通事故鉴定中的应用

DNA分析技术的应用，为交通事故中肇事车辆的认定提供了另一有效的技术手段。但在实际检案中，交通事故尤其是肇事车逃逸案件能获取的生物学检材常为微量、污染，需与动物成分相区别，且难以满足 RFLPs、 VNTR等方法的检验需要。应用 PCR－ STR技术，选择种属特异性高的 STR基因座，既可对微量、降解生物学检材进行有效 DNA分析又可进行种属鉴定，适合于交通事故生物学检材的个体识别。本文研究了 vWA、 D19S253、 D8S1179三个 STR基因座同步扩增在此类检案中的应用，并对检验过程中一些常见问题进行了分析。 1材料和方法 1.…     

抗生素过敏致人死亡1例

临床抗生素中毒和致死的情况,主要是抗生素过量使用或者患者本身体质特别敏感而引发的。本文以一起非法行医案为例,采用液相色谱-串联质谱法对抗生素引起的疑似过敏性死亡病例中林可霉素、头孢曲松和地塞米松成分进行检测分析。结合案件勘查情况、尸体解剖、病理学检验及毒物检验的结果,证实死者死于抗生素过敏反应。本结果填补了液相色谱-串联质谱法同时测定人体血浆中林可霉素、头孢曲松和地塞米松的空白,填充了因抗生素过敏致死的数据量,归纳了抗生素过敏致死的法医学指征及检验,可为抗生素过敏和死亡病例的临床和法医学鉴定提供方法和数据参考。     

微滴式数字PCR技术用于生物样品种属鉴定和绝对定量

目的 运用微滴式数字PCR技术进行生物样品的种属鉴定和绝对定量.方法 选择人mtDNA两个编码基因ND4和16S rRNA,设计特异性引物与探针,用人来源及常见动物样本验证种属特异性,再用重组质粒和2组共16份人来源生物检材,倍比稀释.使用微滴式数字PCR技术进行种属检验和绝对定量,验证其灵敏度和稳定性.结果 人重组质粒FAM （ND4）可进行人来源样品的检测,其检测结果与各级稀释梯度基本吻合,微滴式数字PCR技术可以检测出反应体系中低至单拷贝的DNA.结论 微滴式数字PCR技术可以进行生物样品的种属鉴定和绝对定量,并具有很高的灵敏度和特异性,可应用于日常法医物证检验.     

生物样品中敌鼠钠盐和溴敌隆杀鼠药的检验

介绍了敌鼠和溴敌隆抗凝血杀鼠药的定性定量分析方法.在酸性条件下,选用液-液提取和C_(18)柱固相萃取方法处理生物样品,用高效液相色谱法和薄层色谱方法定性定量分析.方法适用于中毒案件的检验.     

付立叶红外显微镜及其附件检验微量纤维

通过付立叶红外显微镜及其附件ATR、金刚石池对微量纤维进行检验,从而达到对微量或痕量纤维准确确定其种属和比对检验是否相同的目的,方法准确、快捷、可靠.     

基于GC-MS的血液气味识别模型

目的阐明人体血液与动物血液气味的差异性,并建立对两者进行分辨的仪器分析方法。方法采用气相色谱-质谱技术联合固相微萃取前处理方法测定了血液气味的化学组成;以血液气味色谱数据为基础,利用逐步判别分析法,以Matlab为计算工具,编写了血液气味识别模型的代码。结果分析鉴定了9种在人体血液与动物血液之间有显著差异性的化学成分,基于这些化合物建立了血液气味识别模型。结论人体血液与动物血液气味有显著差别;建立的血液气味识别模型能够正确区分人体血液与动物血液。     

可疑植物制品中合成大麻素5F-EDMB-PICA的鉴定

目的探讨无对照品时可疑植物制品中未知合成大麻素的定性分析策略。方法采用甲醇对植物制品中的合成大麻素进行提取,提取液经旋转蒸发仪浓缩后采用制备液相分离、纯化,得到高纯度合成大麻素制备样品,综合利用气相色谱-质谱法(gas chromatography-mass spectrometry,GC-MS)、超高效液相色谱-四极杆飞行时间质谱(ultra-high performance liquid chromatography-quadrupole time-of-flight massspectrometry,UPLC-QTOF-MS)、核磁共振(nuclear magnetic resonance,NMR)对制备化合物进行结构解析。结果采用制备液相得到10 mg高纯度未知样品,采用GC-MS、UPLC-QTOF-MS和NMR进行分析,通过谱图解析,最终确定未知合成大麻素为2-[1-(5-氟戊基)-1H-吲哚-3-甲酰氨基]-3,3-二甲基丁酸乙酯,简称5F-EDMB-PICA。结论本研究建立了采用制备液相从低含量植物制品中提取未知合成大麻素的方法,并综合利用GC-MS、UPLC-QTOF-MS、NMR实现了对未知物结构的解析,这些信息将有助于法庭科学实验室在鉴定实践中鉴定该物质或其他具有类似结构的化合物。     

同时裂解甲基化气相色谱法快速鉴别人体脂肪及动植物油脂

采用同时裂解甲基化气相色谱法（SPM－GC），首次分析人体脂肪，并且观察人体脂肪、猪、鸡、牛、羊脂和豆油中7种脂肪酸的组份含量变化。根据7种主要脂肪酸（肉豆蔻酸、棕榈酸、棕榈油酸、硬脂酸、油酸、亚油酸和亚麻酸）甲酯的百分含量可有效地进行鉴别。结果表明：通过SPM－GC法分析油脂，可将传统的油脂酯化法时间由2个多小时缩短到1分钟左右。数据C．V．％＜4％，最小检测量为1．Oμg。最佳比例四甲基氢氧化按（TMAH）甲醇液（TMAH：甲醇＝1：10，V／V），可消除油脂中多不饱和脂肪酸的异构化和降解。     

家兔肺脂肪栓塞后超微病理学观察

目的 研究脂肪栓塞后肺组织的超微结构变化.方法 通过向实验组家兔血管内注射脂肪诱导肺脂肪栓塞制作肺栓塞动物模型,分别于栓塞即刻(0 h)和栓塞后3、8 h及1、2、7、14d处死动物;对照组家兔注射同等剂量的生理盐水,其余处理方法与实验组相同.经HE和苏丹Ⅲ染色证实造模成功后,用透射电镜观察肺组织的超微结构变化.结果 ...     

Quantitative assessment of the percent fat in domestic animal bone marrow

Measurement of the amount of fat in femoral bone marrow can provide a quantitative assessment of the nutritional status of an individual animal. An analytical method is presented for quantitating the percent fat in bone marrow from three domestic species: bovine, canine, and equine. In this procedure, fat is extracted from bone marrow using pentane, and the percent fat recovered is determined gravimetrically. Based on analyses from adult animals (normal body condition scores), the average percentage of fat in the bone marrow was >80%. In cases in which animals have been diagnosed as emaciated or exhibit serous atrophy of fat (body scores of 1 or 2), the femoral bone marrow fat was less than 20%. In domestic animals, bone marrow fat analysis can be a useful, quantitative measure that, when used in conjunction with all other data available, can support a diagnosis of starvation or malnutrition.     

Characterization of the triacylglycerol crystal formation in adipose tissue during a vehicle collision

The unusual appearance of crystalline fat structures was observed during the postmortem examination of a motor vehicle accident victim. The crystal structures were characterized using Fourier transform infrared spectroscopy and x-ray diffractometry. The structures were found to be made of triacylglycerols, a dominant lipid structure found in human adipose tissue, capable of forming various polymorphic structures. The morphology of the crystalline material was found using both techniques to be predominantly the beta' form of triacylglycerols. The accelerated growth of such triacylglycerol morphology has been observed as a result of shear stresses in other studies involving edible fats. As a result of the findings of this study, it is proposed that increased shear forces may be responsible for the formation of the unusual fat structure found in the victim. An understanding of the effect of forces on the structure of body fat in high-impact collisions can potentially assist in verifying a high-velocity impact.     

Fatal Fat Embolism After Penis Enlargement by Autologous Fat Transfer: A Case Report and Review of the Literature

Fat embolism is an incidental finding in cases of long bone fractures or other trauma, but it is also associated with liposuction and autologous fat transfer, a procedure where fat from liposuction is injected back into the same patient's face, breast, buttocks or penis. We here present a case of sudden death by fat embolism in a healthy young male, caused by a simple penis enlargement procedure, in which fat was injected into the penis shaft. We suggest that the risk of fat embolization might be higher when pretraumatized tissue is subjected to fat injection, like in this case, where a penis elongation was performed before the fat injection.     

Alternative fuels in fire debris analysis: biodiesel basics

Alternative fuels are becoming more prominent on the market today and, soon, fire debris analysts will start seeing them in liquid samples or in fire debris samples. Biodiesel fuel is one of the most common alternative fuels and is now readily available in many parts of the United States and around the world. This article introduces biodiesel to fire debris analysts. Biodiesel fuel is manufactured from vegetable oils and/or animal oils/fats. It is composed of fatty acid methyl esters (FAMEs) and is sold pure or as a blend with diesel fuel. When present in fire debris samples, it is recommended to extract the debris using passive headspace concentration on activated charcoal, possibly followed by a solvent extraction. The gas chromatographic analysis of the extract is first carried out with the same program as for regular ignitable liquid residues, and second with a program adapted to the analysis of FAMEs.     

高效价鸡抗人精液血清的制备和应用

本文介绍一种制备高效价鸡抗人精血清的方法。给10只2kg 以上的公鸡同时静脉和肌肉注射5～10％混合人精液7～8次,获得特异性很强,效价达50,000倍左右的抗血清。通过实验和检案证明,对由于腐败污染、水浸或水洗而含微量精斑的检材,均能检出。     

Volatile organic compounds from the combustion of human and animal tissue

The volatile by-products of the combustion of ordinary fuels such as wood, polystyrene, polyethylene, urethane foam, PVC and the like are well known to the forensic fire debris examiner. When a fire involves a human body, volatile species are produced that are not so well known, including various alkenes and aldehydes. These have sometimes been mistaken for the residues of unusual accelerants. In an attempt to document what volatiles are produced by the combustion of animal fat and human fat, the authors have used an open-tube pyrolysis probe as a microfurnace to burn small samples of unembalmed subcutaneous fat from human, avian and porcine sources, and collect volatiles by charcoal strip adsorption. The volatile products were analyzed by GC/MS. Predominant species included aldehydes in the C6-C10 range, homologous series of alkenes and alkanes, and other hydrocarbon products. These results were compared to those obtained by free-burning (open flame in air) of similar specimens and to the volatiles detected in debris from beneath a human cadaver in a test fire. Differences between the volatile profiles produced by human fat as compared to pork and chicken fat and adventitious sources of such volatiles are discussed.     

Quantified Explosives Transfer on Surfaces for the Evaluation of Trace Detection Equipment

Trace explosive test surfaces are often required for the evaluation of trace detection equipment to determine the equipment performance. Test surfaces of C‐4, Detasheet, Semtex‐H, TNT, and HMTD were prepared by transferring trace amount of explosive deposited on polytetrafluoroethylene (PTFE) transfer strips onto different surfaces (Kraft paper, hard plastic, woven fabric, and soft vinyl). The amount of explosive transferred was deduced from the amount of explosive remaining on the PTFE strips after transfer, as quantified by direct analysis using tandem mass spectrometry with thermal desorption. From the data set of over 2000 transfers, we experienced lower transfer efficiency for Semtex‐H and Detasheet, and for soft vinyl and hard plastic. However, the rapid quantification mass spectrometric method allowed the transfer efficiency to be determined for all test surfaces used in an evaluation of trace explosive detectors, thereby permitting only the test surfaces with desired transfer to be accepted for the assessment.