油漆物证检验中血液干扰的去除

对一起交通肇事逃逸案件中死者衣服上油漆碎片与嫌疑车漆片的成分进行比对检验。红外光谱检验结果显示,死者衣服上沾有血迹区域提取的油漆碎片与其他部位提取的油漆碎片谱图有差异。对凝固的血迹进行检验,发现差异可能来自于血液污染。通过红外光谱差谱技术将血迹区域提取的油漆碎片的红外谱图进行处理,所得谱图与衣服上其他区域提取油漆的红外谱图无明显差异,证实死者衣服上只有一种油漆,且与嫌疑车漆片成分相同,这为证实嫌疑车的肇事事实提供了科学依据。     

从一起交通肇事案件浅谈油漆物证的提取和检验

油漆是交通肇事案件中最常见的物证,油漆物证的检验对于交通肇事逃逸案件的侦破尤为重要.对现场遗留漆片或被撞物品上附着油漆的检验,可以为案件侦破提供方向和线索;通过与嫌疑车漆片的比对,可以为证实接触事实提供证据. 本文根据一起交通肇事案件的物证检验鉴定过程,总结了油漆附着物检验的几点经验,供同行参考.     

利用比较显微镜进行整体分离检验1例

1992年5月,某县交通大队送来一起肇事车逃跑案的现场遗留漆片及嫌疑车辆上的漆片样本,要求对二者进行鉴定。 检验中发现,现场提取的一枚不足1cm×lcm的油漆碎片共有13层,其中有3层泥子,反映出明显的修补痕迹;嫌疑车的样本中有一枚漆片有12层,与现场漆片在形态特征上有较大程度的吻合。为准确起见,对嫌疑车又进行了一次全面勘查和样本提取。 第二次提取的漆片样本中有一枚(右大灯内侧处)与现场漆片的层次结构完全相同,我们对油漆片的层次、厚度、色泽、颜料颗粒度、表面形态及光洁度、层间结构等形态特征进行了分析、比较,发现:①     

显微光谱成像技术在汽车油漆截面检验中的应用

目的对汽车多层油漆的横截面进行分层和比对研究。方法运用显微光谱成像技术对收集的12个省市623个汽车漆片样本进行分层,并对截面结构相同或相似的油漆样本进行了区分。结果 623个油漆样本均可以分层,分析出漆层为两层及以上的油漆样本数占总数的87.26%;截面结构相同或相似的油漆样本能够多层同时区分。结论该方法具有科学及实用价值,检验结果可靠,可见光谱成像技术完全可运用拓展到微量物证的检验中。     

扫描电镜/X射线能谱仪检验电流斑规范化方法探讨

目的探讨电流斑皮肤金属化的机理、检材提取处理和扫描电镜/能谱仪检验规范化方法,对检验结果进行分析和价值判断。方法用扫描电镜/能谱检验,采用低倍大窗口覆盖损伤区域采集平均元素能谱图,并在可能的金属元素富集区域寻找球形金属颗粒。结果扫描电镜下可观察到散在的孔穴、细胞碎屑、龟裂、裂隙等特征,有些电流斑可检出金属元素,其中部分电流斑可发现球形金属颗粒。结论采用规范化的检材提取、处理和检验方法可消除随意性方法造成错检的可能。电流斑皮肤上异常含量的金属附着可支持病理检验符合电流斑表现的结论,同时也为电击导体的推断和金属元素成分比对提供依据。球形金属颗粒的发现揭示存在电弧高温的可能性极大,可强力支持病理检验符合电流斑表现的结论。     

绝缘胶带的检验

目的建立常见绝缘胶带的种属检验和比对检验的方法。方法用傅立叶显微红外光谱仪检验绝缘胶带,并分析不同品牌胶带红外谱图的差异。结果对聚氯乙烯类和聚烯烃类绝缘胶带的检验快速而准确,通过比对分析还可对绝缘胶带进行比对认定。结论该方法对绝缘胶带检材用量少、检验准确率高,且操作简便,具有很强的实用性。     

改良EVO150-8方法在DNA自动化检案中的应用

目的探讨改良EVO150-8方法在批量生物检材DNA检验中的应用价值,建立一种自动化、简单、快速的DNA提取方法。方法采用改良EVO150-8自动化核酸提取纯化仪器与DNA IQ磁珠法纯化试剂盒,对各现场提取的880份血迹、烟蒂、口香糖、精斑（混合斑）、组织、骨骼、脱落细胞等常见生物检材进行DNA提取与纯化,采用Identifiler试剂盒进行扩增检验,用3130XL电泳,GeneMapper ID V3.2分析软件进行分析比对。结果在880份生物检材中,有836份检材成功获得STR分型;检验92份检材仅需时128min。结论改良EVO150-8适合批量生物检材的自动化提取。     

基于二代测序的混合检材精细化分型研究

目的基于二代测序平台进行混合检材精细化STR分型,并评估其法医学应用价值。方法收集性侵案件中3例混合检材及其比对样本,采用M48磁珠提取纯化试剂盒提取样本DNA,使用Foren SeqTM DNA Signature Prep试剂盒制备文库,Mi Seq FGx平台进行测序,Foren SeqTM Universal Analysis v1.2.1软件进行数据分析,将STR序列多态分型与长度多态分型进行比较。结果对3例混合检材STR分型进行拆分,在D3S1358、D13S317与D9S1122基因座发现存在同一长度多态等位基因包含两个个体的序列多态等位基因的情况。结论二代测序技术可对混合检材进行精细鉴别,为混合分型数据拆分提供更多线索和依据。     

精液混合斑检验方法的应用

目前精斑-混合斑的检验方法很多,本文重点介绍其选择、综合检验方法,此法可相互印证,起到复核作用,结果可靠,使用0.5cm~2检材检验可取得理想结果。 1.现场提取性犯罪检材,涂片镜检出 精子,可直接用解离法或配合中和法测其血型。 2.检材未直接检出精子,可参考表中方法制定检验方案。     

X-STR在精斑混合检材检验中的法医学应用

目的应用X和Y染色体STR分析含有相同父系祖先个体DNA的混合检材。方法用差异裂解法提取混合检材基因组DNA,用PowerPlex 21试剂盒、GoldeneyeTM DNA身份鉴定系统27Y试剂盒、SureID?PathFinder扩增荧光检测试剂盒和GoldeneyeTM DNA身份鉴定系统17X试剂盒检测混合检材。结果根据X-STR和Y-STR单倍型成功鉴别具有相同父系祖先的嫌疑人,确定混合检材中存在4个男性个体DNA。结论 X-STR可以应用于检验精斑混合检材,结合Y-STR数据可区分相同父系男性个体,并辅助判断混合检材中男性个体的数量。     

The Evidentiary Significance of Automotive Paint from the Northeast: A Study of Red Paint

This population study was conducted to assess the frequency of physical, microscopical, and chemical properties of automotive paint chips. Population studies of trace evidence provide valuable analytical data for criminalists to assess evidentiary significance. Two‐hundred automotive paint chips were collected from auto body shops from the Northeastern United States. All samples were analyzed using stereomicroscopy, brightfield, and polarized light microscopy. Red paints were targeted for further analysis using a sequence of modern instrumental techniques commonly used by forensic paint examiners: Fourier‐transform infrared (FT‐IR), Raman, and ultraviolet–visible (UV–Vis) microspectroscopy. The discrimination potential of each analytical method was evaluated by inter‐comparing the paint samples. Results demonstrated that macroscopic and microscopic properties were able to differentiate 99.995% of the population (one undifferentiated pair out of 19,900). When combined with either FT‐IR or UV–Vis microspectroscopy, all paints were differentiated. The results of this research lead to the conclusion that one would not expect to encounter two indistinguishable paint chips originating from different sources during the investigation of a single event.     

Forensic applications of infrared chemical imaging: multi-layered paint chips

This paper examines the potential of infrared chemical (hyperspectral) imaging as a technique for the forensic analysis of automotive paint chips in particular, and multicomponent (e.g., layered) samples in general. Improved sample preparation procedures for the infrared analysis of paint chips are detailed, with the recommendation that where mounting resins are chemically incompatible with the sample, it is better to mount and section the sample in a soft wax from which the sections can be removed and pressed into a KBr disk for transmission analysis. Infrared chemical images of multilayered paint chips have been successfully obtained, with the chief advantage over conventional infrared analysis being that thousands of infrared spectra are collected in a few minutes across the whole sample, at a spatial resolution of around 5 microm. As with conventional infrared spectroscopy, chemical species can be identified from their spectra, but the wealth of information available can be also extracted in a number of different ways that make multicomponent spectral (and hence chemical) comparisons between two samples easy to visualize and understand. In one approach, the infrared chemical images of two paint chips being compared side-by-side can be viewed as a "movie," in which each frame is an intensity map of the two samples at a given wavenumber (frequency) value. In another approach, the spectra (pixels) in the image files are classified into chemically similar groups, resulting in a "cluster" image that makes it possible to simultaneously compare all of the layers in two paint chips. These methods are applicable to other multicomponent samples, and also to other chemical imaging techniques.     

Identification of tiny and thin smears of automotive paint following a traffic accident

Three complementary methods in the order of stereomicroscopy, micro-FT-IR spectroscopy and solubility tests were used for the purpose of matching known and questioned paint samples in an auto accident case. Grayish green paint smears scattered on a silvery gray coated plastic bar were taken from a blue car and referred to as questioned samples. Green paint chips were collected as known samples from a green car. These were analyzed to determine whether the paint smears found in the blue car could have been the transfers from the green car. Although each of the three methods, when used alone, suffered from unequal bases for making comparison (i.e., layering whole paint vs. smeared paint), insufficient specificity of methodology and the interfering background coating beneath the smeared paint, the limitations were significantly relieved when three methods were used in combination. Based on the results presented in this report, the questioned grayish green paint smears collected from the blue car and the known green paint chips from the green car are of the same class of paint; that is, the possibility of the above stated paint transfers cannot be eliminated.     

裂解气相色谱-质谱法和红外光谱法对红色汽车油漆的比较分析

目的应用裂解气相色谱-质谱法（Py-GC/MS）和红外光谱法（IR）鉴别3种红色汽车油漆,通过二者的比较,考察Py-GC/MS法在微量物证油漆鉴定中的适用性。方法取适量固体样品直接检测。IR检测条件：红外显微镜,透射模式,光阑尺寸100μm×100μm,检测范围为4000-675cm-1。Py-GC/MS检测条件：裂解温度：550℃,裂解时间：0.20min。HP-5MS色谱柱,分流比80∶1;升温程序：起始温度为40℃,保持1 min,然后以8℃/min升至300℃,保持1 min。质谱采用EI源,扫描范围：29~350 amu。结果 3种红色汽车油漆的红外光谱、裂解图谱均能相互区分。通过裂解产物,能获得更多油漆主要成膜物质的成分信息。结论在样品量许可的条件下,应在红外光谱的检测基础上,进一步使用裂解气相色谱-质谱方法来对汽车油漆进行检测,通过互相验证,获得更准确、可靠的油漆鉴定结果。     

Characterization of Blue Pigments Used in Automotive Paints by Raman Spectroscopy

Micro‐Raman spectroscopy was applied to forensic identification of pigments in paint chips and provided differentiation between paint samples. Sixty‐six blue automotive paint samples, 26 solid and 40 metallic were examined. It was found that the majority of the collected Raman spectra provided information about the pigments present. However, in some cases, fluorescence precluded pigment identification. Using laser excitation at longer wavelengths or pretreatment to effect photobleaching often resulted in reduced fluorescence, particularly for solid color samples, and allowed pigment identification. The examined samples were compared pairwise taking into account number, location, and intensity of absorption bands in their infrared spectra. The estimated discrimination power ranged from 97% for solid paint samples to 99% for metallic paint samples.     

The forensic analysis of soil organic by FTIR

In order to elucidate the discriminating power of various soil analytical techniques, over 100 soils samples were analyzed using conventional analysis (i.e., color, percent organic and density gradient) and a novel FTIR technique. The FTIR technique involves collecting a spectrum of a soil sample that has been oxidatively pyrolysed, and therefore all organic have been degraded. This spectrum is subtracted from the spectrum of the same sample that contained the organic prior to pyrolysis. This resultant IR spectrum represents the organic portion of the sample. The use of organic components increases the discrimination in soils that are otherwise similar. We have illustrated the usefulness of this technique by selecting four soil samples, which have identical Munsel color values but can be discriminated by subtractive ETIR. We propose that the ETIR spectra of the organic portion of soil serves a useful purpose in forensic investigations.     

基于X-射线衍射法检测甲基苯丙胺晶体并推断来源

目的采用X-射线衍射法(XRD)建立一种快速检测甲基苯丙胺晶体并推断其来源的方法。方法对18起案件中的53份甲基苯丙胺样本进行XRD检验。结果通过分析主要特征峰强度比例,可以得到毒品的定性分析结果,以及样本的晶型取向信息;通过分析XRD谱图中毒品的特征峰半峰宽信息可以得到毒品的结晶度;对样本中明显的杂质峰进行比对,即可得到毒品来源信息参考。结论该方法简便快捷、无损样本、无污染,能够快速、准确、高效地分析结晶状毒品,为确定制贩毒集团上下线及涉毒案件串并案提供佐证。     

Gases released from tissue and analyzed by infrared and gas chromatography/mass spectroscopy techniques

Two techniques for analyzing contaminants released as gases from postmortem tissues were described and compared. One technique used gas chromatography/mass spectrometry (GC/MS); the other, infrared spectroscopy (IR). Brain, lung, liver, blood and urine specimens were obtained from suspected drug-overdose victims whose deaths were contributed to or caused by inhalation of unknown gases or vapors during the period immediately preceding death. Gases from the postmortem tissues and liquid samples were separately admitted into an evacuated IR gas cell, the IR spectra recorded, and gas samples then removed for GC/MS analysis. Nitrous oxide, glue, and paint solvent constituents were identified and measured. Only the brain and lung tissues contained measurable amounts of inhalants. Both IR and GC/MS methods were adequate for normal confirmatory analyses; the GC/MS system was judged superior for fast routine efforts normally hampered by incomplete sample history.     

Applications of Blue Light‐curing Acrylic Resin to Forensic Sample Preparation and Microtomy

This study discusses the results of an evaluation of a one‐part blue light‐curing acrylic resin for embedding trace evidence prior to the preparation of thin sections with a microtome. Through a comparison to several epoxy resins, the physical properties relevant to both trace evidence examination and analytical microscopy in general, including as viscosity, clarity, color, hardness, and cure speed, were explored. Finally, thin sections from paint samples embedded in this acrylic resin were evaluated to determine if, through smearing or impregnation, the resin contributed to the infrared spectra. The results of this study show that blue light‐curing acrylic resins provide the desired properties of an embedding medium, generate high‐quality thin sections, and can significantly simplify the preparation of paint chips, fibers and a multitude of other types of microscopic samples in the forensic trace evidence laboratory.