MI Implementation in Juvenile Justice: A Case Report

Motivational interviewing (MI) is a communication style focused on enhancing clients’ own motivation towards change. In the justice system MI has evidence to support that it enhances communication and change behaviors in youth. As most MI training is designed for healthcare settings training and implementation of MI must be adapted to fit the juvenile justice model. This includes both rehabilitation and restorative justice. Here we describe the details that allowed one county small county in Pennsylvania to roll out MI training and initial skills review in less than 6 months. The case reviews the details of planning, trainings, and timing of activities. We then discuss what elements of those details fit into a greater implementation plan that may be applied elsewhere. Four key elements were instrumental to implementation: 1) appreciation of JPO time constraints, 2) cost containment 3) using blending to enhance JPO flexibility with MI use, and 4) policies that normalize use of MI. This outline may assist other courts in their own implementation efforts.     

Discrimination of phenethylamine regioisomers and structural analogues by Raman spectroscopy

In this study, the Raman spectra of 21 phenethylamines were obtained using far‐red excitation (785 nm). The distinguishing ability of Raman for phenethylamines, especially for phenethylamine regioisomers and structural analogues, was investigated. Here, the evaluation of a cross section of Raman spectra demonstrated that all types of phenethylamines were distinguishable, even for certain structural analogues with high spectrum similarity. Raman exhibited high distinguishing ability for phenethylamine regioisomers that differ in the substitution position of halogen, methoxy, alkyl, or other substituted groups; as well as for structural analogues containing different groups, such as furanyl, 2,3‐dihydrofuranyl, halogen, and alkyl substituted at the same position. The Raman spectra for homologues with differences in only a methyl group were found to be highly similar; however, their spectra demonstrated small but detectable differences. Four analogue mixtures and 59 seized samples were also analyzed to study the practical use of the Raman method in forensic field. 95% of the seized samples were correctly identified, which significantly validated the ability of Raman method in identifying the correct isomers. Accordingly, this study provides a non‐destructive, high‐throughput and minimal sample preparation technique for the discrimination of phenethylamines.     

Pitfalls of Computed Tomography 3D Reconstruction Models in Cranial Nonmetric Analysis*

Many studies in the literature have highlighted the utility of virtual 3D databanks as a substitute for real skeletal collections and the important application of radiological records in personal identification. However, none have investigated the accuracy of virtual material compared to skeletal remains in nonmetric variant analysis using 3D models. The present study investigates the accuracy of 20 computed tomography (CT) 3D reconstruction models compared to the real crania, focusing on the quality of the reproduction of the real crania and the possibility to detect 29 dental/cranial morphological variations in 3D images. An interobserver analysis was performed to evaluate trait identification, number, position, and shape. Results demonstrate a false bone loss in 3D models in some cranial regions, specifically the maxillary and occipital bones in 85% and 20% of the samples. Additional analyses revealed several difficulties in the detection of cranial nonmetric traits in 3D models, resulting in incorrect identification in circa 70% of the traits. In particular, pitfalls included the detection of erroneous position, error in presence/absence rates, in number, and in shape. The lowest percentages of correct evaluations were found in traits localized in the lateral side of the cranium and for the infraorbital suture, mastoid foramen, and crenulation. The present study highlights important pitfalls in CT scan when compared with the real crania for nonmetric analysis. This may have crucial consequences in cases where 3D databanks are used as a source of reference population data for nonmetric traits and pathologies and during bone-CT comparisons for identification purposes.     

Portable high‐resolution automated 3D imaging for footwear and tire impression capture

The forensic science community raised the need for improved evidence recognition, collection, and visualization analytical instrumentation for field and laboratory use. While the 3D optical techniques for imaging static objects have been extensively studied, there is still a major gap between current knowledge and collecting high‐quality footwear and tire impression evidence. Among optical means for 3D imaging, digital fringe projection (DFP) techniques reconstruct 3D shape from phase information, achieving camera‐pixel spatial resolution. This paper presents a high‐resolution 3D imaging technology using DFP techniques dedicated to footwear and tire impression capture. We developed fully automated software algorithms and a graphical user interface (GUI) that allow anyone without training to operate for high‐quality 3D data capture. We performed accuracy evaluations and comparisons comparing with the commercial high‐end 3D scanner and carried out qualitative tests for various impressions comparing with the current practices. Overall, our technology achieves similar levels of accuracy and resolution with a high‐end commercially available 3D scanner, while having the merits of being (1) more affordable; (2) much easier to operate; and (3) more robust. Compared with the current practice of casting, our technology demonstrates its superiority because it (1) is non‐destructive; (2) collects more evidence detail than casts, especially when an impression is fragile; (3) requires less time and money to collect each piece of evidence; and (4) results in a digital file that can easily be shared with other examiners.     

Evaluation of canine training aids containment for homemade explosive and components by headspace analysis and canine testing

While canines are most commonly trained to detect traditional explosives, such as nitroaromatics and smokeless powders, homemade explosives (HMEs), such as fuel–oxidizer mixtures, are arguably a greater threat. As such, it is imperative that canines are sufficiently trained in the detection of such HMEs. The training aid delivery device (TADD) is a primary containment device that has been used to house HMEs and HME components for canine detection training purposes. This research assesses the odor release from HME components, ammonium nitrate (AN), urea nitrate (UN), and potassium chlorate (PC), housed in TADDs. Canine odor recognition tests (ORTs) were used with analytical data to determine the detectability of TADDs containing AN, UN, or PC. Headspace analysis by gas chromatography/mass spectrometry (GC/MS) with solid-phase microextraction (SPME) or online cryotrapping were used to measure ammonia or chlorine, as well as other unwanted odorants, emanating from bulk AN, UN, and PC in TADDs over 28 weeks. The analytical data showed variation in the amount of ammonia and chlorine over time, with ammonia from AN and UN decreasing slowly over time and the abundance of chlorine from PC TADDs dependent on the frequency of exposure to ambient air. Even with these variations in odor abundance, canines previously trained to detect bulk explosive HME components were able to detect all three targets in glass and plastic TADDs for at least 18 months after loading. Detection proficiency ranged from 64% to 100% and was not found to be dependent on either age of material.     

Evaluating the discriminating power of amino acid ratios on distinguishing dark colored hair samples

Human hairs are one of the most commonly encountered items of trace evidence. Currently, conventional methods for hair analysis include microscopic comparison and DNA analysis (nuclear and mitochondrial). Each approach has its own drawbacks. Hair proteins are stable and offer an alternative to DNA testing, as demonstrated with proteomics for distinguishing humans. However, proteomics is complicated and requires identifying peptides to remain intact following harsh sample preparation methods. Alternatively, the actual amino acid content of a hair sample may also offer important identifying information and actually requires proteins and peptides to be broken down completely rather than remaining intact. This study evaluated the discriminating power of using hair amino acid ratios to differentiate hair samples from 10 unrelated individuals with dark colored hair. Hair proteins were digested, derivatized, and analyzed using gas chromatography–mass spectrometry. Amino acid ratios were calculated for each individual and comparisons using ANOVA and post-hoc pairwise t-test with Bonferroni correction were made with amino acid ratios for individuals. Overall, out of the 45 possible pairwise comparisons between all hair samples, 38 (84%) were differentiable. Out of the 36 possible pairwise comparisons between brown haired individuals, 32 (89%) were considered differentiable using univariate statistics. Multivariate statistics were also attempted but, overall, univariate models were sufficient for exclusionary purposes. These results indicate that amino acid ratio analysis can potentially be used as an exclusionary method using hair if DNA analysis cannot be performed, or to corroborate conclusions made following microscopic analysis.     

Characterization of an odor permeable membrane device for the storage of explosives and use as canine training aids

The storage and use of explosives is regulated at the state and federal level, with a particular focus on physical security and rigorous accounting of the explosive inventory. For those working with explosives for the training and testing of explosive-detecting canines, cross-contamination is an important concern. Hence, explosives intended for use with canine teams must be placed into secondary storage containers that are new, clean, and airtight. A variety of containers meet these requirements and include screw-top glass jars (e.g., mason jars). However, an additional need from the explosive-detecting canine community is secondary containers that can also be used as training aids whereby the volatiles emitted by explosives are emitted in a predictable and stable manner. Currently, a generally accepted method for the storage of explosives and controlled emission of explosive vapor for canine detection does not exist. Ideally, such containers should allow odor to escape from the training aid but block external contaminates such as particulates or other volatiles. One method in use places the explosive inside a permeable cotton bag when in use for training and then stores the cotton bag inside an impermeable nylon bag for long-term storage. This paper describes the testing of an odor permeable membrane device (OPMD) as a new way to store and deploy training aids. We measured the evaporation rate and flux of various liquid explosives and volatile compounds that have been identified in the headspace of actual explosives. OPMDs were used in addition to traditional storage containers to monitor the contamination and degradation of 14 explosives used as canine training aids. Explosives were stored individually using traditional storage bags or inside an OPMD at two locations, one of which actively used the training aids. Samples from each storage type at both locations were collected at 0, 3, 6, and 9 months and analyzed using Fourier Transform Infrared (FTIR) Spectroscopy and Gas Chromatography–Mass Spectrometry (GC–MS) with Solid-Phase Microextraction (SPME). FTIR analyses showed no signs of degradation. GC–MS identified cross-contamination from ethylene glycol dinitrate (EGDN) and/or 2,3-dimethyl-2,3-dinitrobutane (DMNB) across almost all samples regardless of storage condition. The contamination was found to be higher among training aids that were stored in traditional ways and that were in active use by canine teams.     

Overview of the seized and examined pharmaceutical in the state of Minas Gerais-Brazil by the Civil Police from 2017 to 2022: A fundamental analysis of the recent impact over the drugs market

This work presents a data survey regarding the qualitative chemical analysis of drugs seized by the Police in the state of Minas Gerais between July 2017 and June 2022, including an evaluation of labeling of 265 samples of anabolic androgenic steroids (AAS) seized in 2020. The Active Pharmaceutical Ingredients (API) present in the samples were identified through chemical analysis and classified by system Anatomical Therapeutic Chemical (ATC) methods. Analysis of the labeling information for 265 samples of AAS followed the guidance of legislation RDC 71 (2009) from ANVISA. For this study 6355 seized pharmaceuticals underwent qualitative chemical analysis that corresponded to 7739 APIs successfully identified and classified. Among the components studied AAS, psychostimulants, anesthetics, and analgesics were the most commonly examined. AAS seized and tested increased by over 100% and for the majority of the samples analyzed were found to not match the labeling on the packaging. In the meantime, anti-obesity drugs presented a prominent increase of 400% from 2020/1 to 2021/2, during covid-19 quarantine. Seized pharmaceuticals and tests can support information in the planning of public health and safety policies.     

Fatal intoxication involving 2-methyl AP-237

Novel synthetic opioids contribute considerably to the opioid epidemic, especially with the frequent emergence of structurally similar compounds. This case report describes a fatal intoxication involving 2-methyl AP-237. A 54-year-old Caucasian male was found deceased from an apparent drug overdose. A plastic container labeled “2MAP” and a cut straw were found in the decedent's backpack at the scene. A white substance found in the container tested positive for fentanyl by field testing. According to his medical history, the decedent was treated for a drug overdose 3 years prior to his death. With no diagnostic findings at autopsy, the case was submitted for toxicological analysis. An unknown substance was detected in peripheral blood and urine using gas chromatography with nitrogen phosphorous detection (GC-NPD). Further testing was conducted using gas chromatography–mass spectrometry (GC–MS) and liquid chromatography-quadrupole-time-of-flight mass spectrometry (LC-QTOF-MS) which confirmed the presence of 2-methyl AP-237 and potential metabolites in blood and urine. Quantitation by GC-NPD revealed concentrations of 2-methyl AP-237 in blood and urine at 480 ng/mL and 4200 ng/mL, respectively. The toxicological analysis also identified and quantitated alprazolam in the blood at 55 ng/mL. Additionally, the metabolism of 2-methyl AP-237 was investigated and three hydroxylated metabolites were identified in peripheral blood and urine. Limited literature is available for the detection and quantitation of 2-methyl AP-237 in postmortem specimens. Given the toxicological findings with unremarkable autopsy findings, this case is an example of a fatal intoxication involving 2-methyl AP-237.     

Medical examiner response to the drug overdose epidemic in King County Washington: “Real-time” surveillance,data science,and applied forensic epidemiology

As the overdose epidemic overwhelmed medicolegal death investigation offices and toxicology laboratories, the King County Medical Examiner's Office responded with “real-time” fatal overdose surveillance to expedite death certification and information dissemination through assembling a team including a dedicated medicolegal death investigator, an information coordinator, and student interns. In-house testing of blood, urine, and drug evidence from scenes was performed using equipment and supplies purchased for surveillance. Collaboration with state laboratories allowed validation. Applied forensic epidemiology accelerated data dissemination. From 2010 to 2022, the epidemic claimed 5815 lives in King County; the last 4 years accounted for 47% of those deaths. After initiating the surveillance project, in-house testing was performed on blood from 2836 decedents, urine from 2807, and 4238 drug evidence items from 1775 death scenes. Time to complete death certificates decreased from weeks to months to hours to days. Overdose-specific information was distributed weekly to a network of law enforcement and public health agencies. As the surveillance project tracked the epidemic, fentanyl and methamphetamine became dominant and were associated with other indicators of social deterioration. In 2022, fentanyl was involved in 68% of 1021 overdose deaths. Homeless deaths increased sixfold; in 2022, 67% of 311 homeless deaths were due to overdose; fentanyl was involved in 49% and methamphetamine in 44%. Homicides increased 250%; in 2021, methamphetamine was positive in 35% of 149 homicides. The results are relevant to the value of rapid surveillance, its impact on standard operations, selection of cases requiring autopsy, and collaboration with other agencies in overdose prevention.