国产磁珠结合自动化工作站批量提取生物检材DNA的应用

目的建立国产磁珠结合自动化工作站批量提取案件中生物检材DNA的方法。方法采用国产磁珠结合Bio-Robert Universal System自动化工作站对案件中常见的生物样本进行DNA提取,检测Identifiler系统16个STR基因座,在ABI3130XL遗传分析仪上进行STR分型。其中210份样品同时在ABI7500型荧光定量PCR仪上进行定量。结果9100份10类生物检材应用国产磁珠结合自动化工作站,大部分可提取到足够的DNA进行STR检验。STR检验成功率最高的为口腔拭子、肌肉,达100%,接触细胞检材的成功率较低,为50.0%。结论国产磁珠结合自动化工作站可用于案件中常见的大部分生物样本的DNA提取。     

法医物证DNA自动化检验技术体系的研究

目的建立自动化工作站同步提取不同种类涉案法医生物检材DNA的新方法。方法选用TECAN Freedom EVO100．4、75—2型自动化提取、加样工作站,采用磁珠法及Chelex-100法对各类涉案生物检材进行DNA提取、PCR扩增、毛细管电泳检测其STR分型,进行比较测试。在“全国公安机关DNA数据库应用系统”中建立并应用实验室信息管理系统（LIMS）模拟实施规范化DNA检案。结果1552份各类检材,采用工作站-磁珠法提取DNA效果最佳,STR检测成功率为95％,工作站-Chelex法为88％;二者分别与其手工提取法比较,成功率无明显差异。92个样本同期检测,自动化工作站较手工操作DNA检案时间可缩减1．25倍。结论工作站域珠法提取涉案检材DNA,可获得满意的STR分型结果。应用LIMS管控,可有效防控污染,明显提高检案效率及鉴定质量。     

利用AutoMate Express~(TM)自动化法医DNA提取系统提取骨骼及牙齿DNA

目的探讨建立骨骼及牙齿DNA自动化提取的新方法。方法将33份骨骼及15份牙齿样本分别用冷冻研磨和手工处理两种方法研磨成粉,采用AutoMate ExpressTM自动化法医DNA提取系统提取DNA并定量。结果 AutoMate ExpressTM自动化法医DNA提取系统能够在3h左右完成骨骼、牙齿DNA的提取,两种方法处理的骨骼样本所得DNA质量浓度差异无统计学意义。冷冻研磨处理的骨骼和牙齿样本均获得了较好的STR分型结果,且牙齿样本所得DNA质量浓度高于手工提取所得。结论应用AutoMate ExpressTM自动化法医DNA提取系统是自动化提取骨骼、牙齿DNA的一种新方法,可应用于法医实际案件检验。     

用Chelex100法及有机溶剂提取法联合提取DNA扩增STR基因座的比较研究

为了比较不同方法提取DNA扩增STR基因座的成功率 ,本文用Chelex10 0法及Chelex10 0法联合有机溶剂提取法分别提取性犯罪案件 6份血斑及 6份混合斑中精子DNA ,并用PE公司ProfilerPlus系统复合扩增 ,ABI 310型基因分型仪检测。结果表明 ,常规采用Chelex10 0法提取血斑及精斑等生物检材DNA作STR基因座检验失败或所检测的位点较少时 ,应对Chelex10 0法提取的DNA上清液再用有机溶剂提取法提取 ,可极大提高DNA检验成功率。采用本文建立的Chelex10 0法联合有机溶剂提取法 ,提高了PCR扩增阳性率 ,对实际检案很有帮助 ;在PCR扩增前应常规进行DNA定量检验 ,否则对于重要检材应进行梯度扩增。     

QIAcube小型工作站在生物接触类检材提取中的应用研究

目的 探讨QIAcube工作站在生物接触类检材中的提取效果。方法 将90份以脱落细胞粘取膜、实物样本(纱线转移)或棉签擦拭物为载体的生物接触类检材,分别采用QIAcube工作站、EZ1工作站和手工硅珠法进行基因组DNA提取、定量并检测15个常染色体基因座的STR分型。结果 利用QIAcube工作站提取的生物接触类检材平均检出率达到44.4%,其中脱落细胞粘取膜组检出率为56.7%,实物纱线转移组检出率为46.7%,棉签擦拭物组检出率为30.0%。脱落细胞粘取膜组和实物样本(纱线转移)组均获得较好的STR分型结果,所得DNA浓度均优于棉签擦拭物组样本。QIAcube工作站组平均检出率为44.4%,手工硅珠法组平均检出率为43.2%,而EZ1工作站组平均检出率为26.9%,前两者平均检出率明显高于EZ1工作站组。QIAcube工作站组与硅珠法组所得DNA浓度无显著差异,但均明显高于EZ1工作站组。QIAcube工作站组与硅珠法组检测得到的STR分型RFU值及峰值均衡性均优于EZ1工作站组,尤其是大片段基因在前两组中均能够被完整检测到。结论 采用QIAcube工作站提取生物接触类检材检出率高,STR分型结果良好,可应用于法医物证实际案件检验。     

脱落上皮细胞类生物检材的自动化提取

目的建立一种自动化提取脱落上皮细胞类生物检材DNA的方法。方法附着于不同载体上的脱落上皮细胞类生物检材共278份,应用Eppendorf epMotion 5075LH工作站结合DNA IQTM系统提取模板DNA,并用Identifiler试剂盒进行STR检验。结果在278份被检的生物检材,其中126份检材获得13个基因座以上的STR分型,不同类型的检材其检出率不相同,最高达73.44%,最低为10.89%。结论脱落上皮细胞类检材应用自动化工作站提取DNA模板可在法医日常检案中广泛应用。     

Chelex法和两种磁珠法提取接触DNA效果的比较

目的比较Chelex法、DNA IQ磁珠法、EQ国产磁珠法对接触DNA的提取效果。方法将稀释为10ng、100ng的标准品DNA,分别采用Chelex法、DNA IQ磁珠法、EQ国产磁珠法处理;对30例烟蒂和30例牙刷分别采用Chelex法、DNA IQ磁珠法和EQ国产磁珠法提取DNA,然后进行PCR定量和STR检测。结果Chelex法对DNA的提取无损失,DNA IQ磁珠法、EQ国产磁珠法对DNA的提取均有不同程度的损失;烟蒂、牙刷等检材采用Chelex法提取的接触DNA量和IPC CT值显著高于IQ磁珠法、EQ国产磁珠法,但STR检验成功率却低于IQ磁珠法、EQ国产磁珠法。2种磁珠法提取的DNA量、IPC CT值和STR检验成功率无显著性差异。结论污染轻、杂质少的接触DNA检材,用Chelex法提取最为方便快捷;IQ磁珠法、EQ国产磁珠法更适合污染接触DNA检材的提取及自动化操作。     

运用酚-氯仿法结合磁珠法提取蝇蛆体内人类DNA

目的建立运用酚-氯仿法结合磁珠法从蝇蛆嗉囊内提取人类DNA的方法,从而提高STR分型检验的灵敏度。方法采用酚-氯仿法对蝇蛆嗉囊内容物中的人类DNA进行提取,提取产物经磁珠法纯化浓缩后用QuantifilerTM人类DNA定量试剂盒在7500型实时荧光定量PCR仪上进行PCR定量,再用AmpF■STR IndentifilerTM试剂盒在3130XL-Avant遗传分析仪上对这些DNA样本进行STR分型。结果本研究建立的方法可增加模板DNA浓度约为单独使用酚-氯仿法的2倍。用此方法提取到的DNA浓度[（0.218±0.041）ng/μL]可获得全部16个STR分型结果。结论酚-氯仿法结合磁珠法可以有效地提高提取到的人类DNA样本STR分型检验的灵敏度,对于从事法医昆虫学方面研究的工作者有较好的实用价值。     

尿液及尿斑DNA分型的研究

目的研究尿液及尿斑的DNA提取及其检验。方法用Chelex100法及QIAampMiniKit提取尿液及尿斑样本中的DNA,进行PCR扩增及STR检验。结果新鲜的及存放时间在12h以内的尿液样本能得到较好的分型结果;存放2d左右的尿液样本有50%能检出基因型;存放7d及更长时间的尿液样本全部不能检出基因型;尿斑样本的分型成功率很低。结论较新鲜的尿液样本均能进行DNA分型,在法医检案中具有应用价值。     

生物检材DNA碱性裂解提取法的优化与改良

目的通过对DNA碱性裂解提取法进行优化和改进,建立一种操作更简便、检验快速、结果更可靠的生物检材DNA提取方法。方法以抗凝血作为检验样本,通过改变提取试剂的浓度、pH值、保存时间及孵化样本的温度、时间等条件,观测对检验结果峰值的影响,以确定提取试剂最佳条件,DNA提取物最佳保存条件。通过用改良后的碱性裂解法及Chelex100法同时提取不同量的抗凝血样本、各类法医生物检材,用不同厂家的DNA试剂盒扩增,对碱性裂解法的灵敏度、适应性和适用性进行评估。结果改良后的碱性裂解法只需将生物检材用NaOH（0.25mol/L）99℃孵化8min,振荡后加入TrisHCl（0.05mol/L,pH=6.5）中和液,离心后直接扩增检测。DNA提取物于-20℃冰箱可长期保存。对于毛发及精斑类检材优于Chelex100法。DNA提取物适用于现有各种DNA试剂盒扩增检测,其灵敏度与Chelex100法相似。结论改良后的碱性裂解法,操作简便、检验快速、结果可靠,可适合于法庭科学的检案与建库。     

DNA数据库建设中批量样品不同DNA提取方法的比较

目的比较和选择自动化工作平台提取DNA的方法,并用于DNA数据库建设。方法用手工Chelex-100法、Biomek3000自动化工作平台结合Chelex-100法及DNA-IQTM磁珠法对实验室收集的建库滤纸血样进行DNA提取,荧光定量技术对上述3种方法提取的模板DNA进行测定;扩增产物用3100基因分析仪检测并用基因分析软件分析。结果手工Chelex-100法、自动化Chelex-100法及DNA-IQTM磁珠法提取的DNA模板浓度分别为0.593ng±0.131ng/μl、0.579ng±0.096ng/μl、0.447ng±0.056ng/μl;成功率分别为100%、98.9%、99.5%。结论本文建立的自动化Chelex-100法可用于大规模DNA数据库建设。     

Automated PCR setup for forensic casework samples using the Normalization Wizard and PCR Setup robotic methods

Human genome, pharmaceutical and research laboratories have long enjoyed the application of robotics to performing repetitive laboratory tasks. However, the utilization of robotics in forensic laboratories for processing casework samples is relatively new and poses particular challenges. Since the quantity and quality (a mixture versus a single source sample, the level of degradation, the presence of PCR inhibitors) of the DNA contained within a casework sample is unknown, particular attention must be paid to procedural susceptibility to contamination, as well as DNA yield, especially as it pertains to samples with little biological material. The Virginia Department of Forensic Science (VDFS) has successfully automated forensic casework DNA extraction utilizing the DNA IQ(trade mark) System in conjunction with the Biomek 2000 Automation Workstation. Human DNA quantitation is also performed in a near complete automated fashion utilizing the AluQuant Human DNA Quantitation System and the Biomek 2000 Automation Workstation. Recently, the PCR setup for casework samples has been automated, employing the Biomek 2000 Automation Workstation and Normalization Wizard, Genetic Identity version, which utilizes the quantitation data, imported into the software, to create a customized automated method for DNA dilution, unique to that plate of DNA samples. The PCR Setup software method, used in conjunction with the Normalization Wizard method and written for the Biomek 2000, functions to mix the diluted DNA samples, transfer the PCR master mix, and transfer the diluted DNA samples to PCR amplification tubes. Once the process is complete, the DNA extracts, still on the deck of the robot in PCR amplification strip tubes, are transferred to pre-labeled 1.5 mL tubes for long-term storage using an automated method. The automation of these steps in the process of forensic DNA casework analysis has been accomplished by performing extensive optimization, validation and testing of the software methods.     

Evaluation of a semi-automated, magnetic bead-based DNA extraction method for genetic fingerprinting of forensic casework samples

In order to cope with the demanding workload for DNA profiling of forensic casework samples a concept for a semi-automated processing system was developed at the Landeskriminalamt (Office of Criminal Investigation) Baden-Württemberg, Germany [K. Vollack, et al., Implementation of a semi-automated processing system for DNA profiling of forensic casework samples, this issue]. The applied magnetic bead extraction method is based on ChargeSwitch^® Technology (CST) from Invitrogen and was established on a liquid handling workstation Freedom EVO^® 150 from Tecan.     

磁珠法对混合斑中精子DNA批量自动提取的应用研究

目的 建立混合斑中精子DNA批量自动提取的方法.方法 对56例混合斑经第一步消化后的精子沉淀用DNA IQ试剂盒和Biomek（R）2000全自动核酸工作站自动提取纯化,3130xl型遗传分析仪分析结果.结果 56例混合斑检材均得到较好的STR分型结果.结论 DNA IQ试剂盒和Biomek（R）2000全自动核酸工作站批量自动提取纯化混合斑的方法快速简便,可应用于法庭科学实践.     

Implementation and Validation of the Teleshake Unit for DNA IQ™ Robotic Extraction and Development of a Large Volume DNA IQ™ Method

Abstract: Automated platforms used for forensic casework sample DNA extraction need to be versatile to accommodate a wide variety of sample types, thus protocols frequently need modification. In this study, DNA IQ? methods previously developed for the Biomek^® 2000 Automation Workstation were adapted for the Teleshake Unit using normal volumes and all deepwell extraction, and a large volume DNA IQ? method developed. DNA purification without detectable contamination of adjacent reagent blanks is reported in the extraction of tissue samples containing several micrograms of DNA. Sensitivity and contamination studies demonstrated similar performance with the manual organic extraction method for bloodstain dilution samples. Mock casework samples demonstrated the effectiveness of the Teleshake and Teleshake large volume methods. Because of the performance and increased versatility of the DNA IQ? extraction with these modifications, the Teleshake Unit has been implemented in both normal and large volume automated DNA extractions at the Virginia Department of Forensic Science.     

磁珠法自动化纯化现场检材DNA方法研究

目的利用TE-MAGS在TECAN工作站上结合磁珠试剂盒,建立自动化工作站批量纯化现场检材DNA的方法,并探讨其在法医物证检案中的应用。方法灵敏度测试:标准品使用0.1ng/μL 9947A,用200μL TES稀释制备DNA总量0.1ng~1ng共10种的标准样品,采用本文方法提取纯化,使用IdentifilerTM试剂盒扩增,用3130XL型测序仪检测,Gene Mapper ID-X分析,分析STR图谱质量;纯化能力测试:在1ng总量的标准样品中加入腐殖酸、血红素,采用本文方法提取纯化、扩增检测,分析STR图谱质量;实际案件应用对比:收集304份现场检材,分别采用本方法和硅珠法进行提取纯化,经扩增检测,统计对比两种提取纯化方法 STR分型成功率。结果灵敏度测试:0.1ng~0.2ng总量标准样品提取的DNA模板,扩增后可检测到部分基因座STR图谱,0.3ng~1ng总量标准样品提取的DNA模板,扩增后可以得到完整的STR图谱;纯化能力测试:对混合有一定浓度的腐殖酸、血红素的标准样品的提取产物检测图谱未见明显抑制;实际案件应用对比测试:304份现场检材工作站磁珠法检出成功率(50%)高于硅珠法(40.8%)。结论本文所建立的方法缓冲范围较大,回收率高,纯化能力强,提取产物STR分型成功率高,适合现场检材批量化DNA检验。     

Application of the BioMek 2000 Laboratory Automation Workstation and the DNA IQ System to the extraction of forensic casework samples

Robotic systems are commonly utilized for the extraction of database samples. However, the application of robotic extraction to forensic casework samples is a more daunting task. Such a system must be versatile enough to accommodate a wide range of samples that may contain greatly varying amounts of DNA, but it must also pose no more risk of contamination than the manual DNA extraction methods. This study demonstrates that the BioMek 2000 Laboratory Automation Workstation, used in combination with the DNA IQ System, is versatile enough to accommodate the wide range of samples typically encountered by a crime laboratory. The use of a silica coated paramagnetic resin, as with the DNA IQ System, facilitates the adaptation of an open well, hands off, robotic system to the extraction of casework samples since no filtration or centrifugation steps are needed. Moreover, the DNA remains tightly coupled to the silica coated paramagnetic resin for the entire process until the elution step. A short pre-extraction incubation step is necessary prior to loading samples onto the robot and it is at this step that most modifications are made to accommodate the different sample types and substrates commonly encountered with forensic evidentiary samples. Sexual assault (mixed stain) samples, cigarette butts, blood stains, buccal swabs, and various tissue samples were successfully extracted with the BioMek 2000 Laboratory Automation Workstation and the DNA IQ System, with no evidence of contamination throughout the extensive validation studies reported here.